Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making thier way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying postition all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 Looking beautiful today and looked like she could use her first haircut.. gave her a TOP off. Roots are laying in the water everything is looking right on track.. Week 1 Day 5- 8/16/2023 walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. She had roots nicely in the water.. this grow is on!!! Week 1 Day 6- 8/17/2023 Humidity was a little low this morning, so I refilled the humidifiers. Other than that, the temp looks great, the PH looks great, the PPM looks good the plant is in the praying position and all damage from the little drowning seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started first hair cut given and both side nodes are growing. Everything is looking good and on track.. A lot better than week one of the last grow when I had them drowning week 1. Really excited on how this grow is going to come out.

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

All I can say about this strain… is I loved how high I felt when smoking this strain. More than that I will be lying… now that I have opened myself to this community, I am going to me conscious about what I smoke and how I grow… and I think investing in a test kit will be ideal, so I can cpmpare my potency with the breeder’s research.

The ladies doin' good so far. Wedding Cake is startin' to build buds. I guess from now on it's a pleasure to watch 'em growin' up.

Very slow , not what I expected for a auto 🙄 but another experience to add to the ongoing endeavor. By now with other autoflowers I've grown they would be much further along like at least second node space. But I feel ill turn this one around & this will be as good as the others here on Grow Diaries. 🤞💚💚💚💚

F week 7 started 11/23/24. My power supply or lamp broke down 11/30/24. I fortunately manage to buy a new light system. I bought ViparSpectra P2000 250W. Now i've moved into the LED era.

G.23: le piante sono in salute anche se la g.p. ha le foglie un po' basse, non noto carenze, ma penso che abbia bisogno semplicemente di più acqua (al giorno 21 ho dato 300 ml, al giorno 23 600 ml). Controllerò domani per vedere se migliora G.24: le piante hanno risposto bene all'innaffiatura e oggi i vasi erano di nuovo leggeri come ieri, perciò nuova innaffiatura da 500 ml per entrambe. G.27: come dalle foto ho messo un piccolo umidificatore a causa dell'eccessivo caldo (30% u.r.). Le piante crescono bene. Sto mantenendo le quantità di fert più basse rispetto alle volte precedenti e mi sta ripagando con un bel verde delle foglie. Questa settimana le piante hanno iniziato ad avere molta più sete e ad ogni giorno che ho pesato il vaso era sempre leggero. Continuate a seguirmi per nuovi aggiornamenti.

Que hay de nuevo familia, mis green ak xL están dando sus frutos, no veas que bonitas que se están poniendo, floración algo lenta y variedad difícil de cultivar pero que si sabes realmente merece la pena.

Day 57 : 600W LED, 18 hours on 6 hours off light schedule, the same with ventilation. Water intake 200 ml per day per plant, fertilization remains the same on Monday, Wednesday and Friday Biobizz Family and on Tuesday Thursday Saturday bat guano and Epsom salt. Humidity approx 50%. Day 58: I removed all the LST stuff so no more elastic bands and hooks. Day 62: Plants are fine Critical Orange Punch and Sour Stomper will be the quickest in this group. Lemon Zkittle' buds started getting thick...

Super easy grow , i hst & topped this girl early & I think that really helped her out !!! She was grown in living soil so no NPK was given to this girl at all .. she smells just like lemonade, and finish on day 71 from seed !! Super happy with this girl ... she’s drying now , I can’t wait to smoke her!! She smokes super smooth, taste exactly how she smells!! Great job fast buds

Hey Cannafam Happy Monday, My Apricot gal has had a fairly good week overall, mainly due to a rare bout of very hot weather. Its been absolutely scorchin, Monday and Tuesday 28c ,Wednesday and Thursday 30c with continuous Sun and average nighttime temps of 24c, Friday through to Sunday thing tapered of a bit down to 23c with Sunshine and clouds.We did also have a thunderstorm Thursday night ,but its been pretty solid on the weather front 😊 Daylight hours are currently at 16 hrs 22 minutes. We are now in Flower and her first Pistils have appeared! 😊 Training has continued a bit each day and ive been guiding her branches away from the middle and trying to keep them fairly level with some more light defoliation There was one shoot which had grown from the underside of the plant which was struggling for light which has now been exposed. All shoots have had really good growth this week and ive virtually got her in to the shape i want trying to give spacing for decent airflow in flower, but its a case of constant tweeking. The leaf miner problem has now ceased but my other friends the slugs appeared after a thunderstorm thurday night and had a go a couple of the fan leaves. This occured after the rain had washed away the diamatous earth from around the pot and the copper tape dididnt work 😑 Ive therefor now decided to roll put some local ale in a beer trap for them to try as id rather they drink than eat, hopefully i can take lock the in beer jail! Feed wise ive actually managed two feeds this week with the plagron n trace to help power that growth and il be flippin over to flower nutes next week. Although this gal has been attacked a bit shes coming along nicely and doin her Daddy proud 😁 Thats all from me for now, thanks for stopping by ✌️💚

Floracion (Tiempo estimado 64 dias) Primer Semana de Floracion 08/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 09/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, subir demaciado la intencidad del ventilador fue contraproducente ya que las hojas sufrieron quemaduras por frio, se a empezado a regular un poco mejor la temperatura pero el intractor y extractor de 4 pulgadas no estan eficiente, empeze a provar con hielo embotellado para bajar temperatura de la solucion nutriva, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 10/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 11/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz , 12 hrs de obscuridad. 12/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 13/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, se cambia extractor por uno de 8 pulgadas con filtro, se mantiene la temperatura a 21 grados con la lampara a 75 % de potencia, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad. 14/01/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 1000-1250, Ec 2.0-2.5, Temperatura 20°C - 26°C, Humedad 75% Ambiente: Temperatura 24 °C, Humedad 65%, Ventilación 15%, 12 hrs de luz, 12 hrs de obscuridad.

Semana 7🤩 Esta semana ya bajamos la dosis de ferti, sacamos el sensi bloom definitivamente asi empieza a bajar la carga de nutrientes. Tambien saque la lampara de calor para que cambien de color y para no motivar a las pocas arañitas que quedan en carpa ya que bajamos bastante la humedad, tratamos de mantener entre 55 y 58. Muy contenta con este segundo cultivo de la oreoz, hermosa genetica productora resinosa y muuy rica

The week went well. She is getting so fat and chunky. She has a very lemony and sweet smell when you brush up on a bud. I lowered the light schedule to 10/14 a few days ago. More pistils are begining to change now each day. We're coming down the backstretch now. The viedo is probably not so good quality.

The smell of lemony cake batter goes brrr :D

Week 7 did not go too well. I believe I ran into a heat stress issue due to the lights and I also tried some new supplements to add to the res and I ended up with some type of nute lockout.....I think. Anyway, today starts week 3 of flowering and after some more research into nutrient ratios I came up with what you see above. Now I added all of this into 16 gallons of RO water (in the correct sequence) and my EC ended up a little higher than I wanted...1.4. I was looking to stay more around 1.0, but below 1.2 regardless. So I ended up adding 3 more gallons of RO water to the mix and got my numbers looking pretty descent. I was under the assumption ww was on the smaller side of the cannabis world, but this one plant, nicknamed "HULK", seems to be the exception to the rule. Hulk is now 24 inches tall....WITH LST. There is probably another 1.5 feet of branch that is basically horizontal. Well it leaves me in a predicament. I only have 22 inches of light between the 315w CMH and Hulk. The light is as high as it can go in the tent. Well I am going to keep an eye on these girls and hopefully we will see some improvement in growth. Last week pretty much stalled. Well I will check back in and let you know how it's going. Until then just keep it growing. Jan 16 update: wow, the Hulk just keeps going 😳. The runt is still giving me issues. It looks like heat stress but not from the lights. Thinking a vpd issue. Got a thermal temp gun so I am watching for that now. Also got me a wireless camera set up now. So I can check on the girls whenever and wherever I am. Love it.

Still doing some. Slight trimming and wwe are on to the races. These girls will begin to stack on weight going forward. Gorilla zkittlez is a big cultivator

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚