Likes
3
Share
@tteague75
Follow
We are on cruise control now. Straight water. Maybe a tea to keep the microbes up and active.
Likes
25
Share
week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
3
Share
Likes
25
Share
@BudHaks
Follow
Hey peeps! I have now started lowering the nutrients and the PPM is 1200 on average but I intend on lowering it in the next couple of days in order to start flushing her later next week. She keeps popping out bud sites all over the bottom even though we did trim her in the first couple weeks. I have decided that, when I do harveserst her, i'm going to harveerst her in three stages to maximise the yeild and get that light to the lower small bud sites over the next couple of weeks. Let me know what you think!
Likes
10
Share
Esa familia, ya estamos a mitad de floraci贸n como quien dice finalizando la 4 semana , y es que est谩n cogiendo unos tonos tambi茅n, esos colores rojos y morados que est谩n entonando馃槇 Tuve que tuitear las 5 plantas de un armario ya lo visteis y las puntas se dirigen hacia la luz. C贸mo pod茅is observar en las fotos y v铆deos. Algunas se sobrealimentaron porque no todas comen igual pero reduci la alimentaci贸n solo en esas y ya se est谩 solucionando. Por lo dem谩s , pronto empezar茅 aplicar el overdrive junto con el bud candy unas semanas m谩s. Las temperaturas en estos indoors son perfectas y la humedad relativa es correcta. Hasta aqu铆 es todo espero que os est茅 gustando, buenos humos y feliz navidad 馃挩馃挩馃挩
Likes
23
Share
Ooooh boy, what an eventful beginning to week 14! I took this beast out of the tent for a reservoir change and noticed that she had a few branches hanging below the canopy in the middle of the plant that had a lot of heat damage. 馃槱 So that haircut she needed turned into a bit of an amputation... I've never dealt with heat damage before, so I don't know what it does to the quality of the bud, but what I DID know was that if I didn't change something, it certainly wasn't going to get any better. I removed 90% of the heat damaged branches, leaving only the branches that had mild damage to the leaves only. Looking at her, she doesn't look like she's missing much of anything, but what she gained was some more space to breathe and to feel the breeze. 馃槉 If anyone has dealt with heat damage in the past, I'd love to know what you did about it. Did you keep the buds? Ditch em? Are they safe to smoke? Do you think I did the right thing? Every grow throws me so much more to learn about and so many more opportunities for hands on experience dealing with things that I've only ever read about. It's the freaking tits! 鉁岋笍馃挏馃尡
Likes
Comments
Share
She looks a lot better than three weeks ago least she鈥檚 back moving again with further growth I fed her 100ml of phd water due to a very light pot. I am still holding her in natural sunlight!
Likes
6
Share
She is doing good, not sure what my plant for her is yet since all my plants need to be in bloom in 9 days....... oh well maybe i'll bring her upstairs with my house plants lol. Enjoying her environment, no longer needs bamboo stalk to hold up, giving light nutes. Happy growing 馃懡 FEB10/20 update with video, everything looks good n healthy
Likes
6
Share
14.07.2026 Hi Growmies, welcome back to the grow show! Weather and Conditions The weather has been consistently warm this week, with temperatures hovering around 30掳C and, once again, not a single drop of rain. Because of the stable weather, the girls didn't spend a single day inside the greenhouse. There simply wasn't any reason to move them under cover. My rain barrels, however, are slowly but surely running dry. Growth The explosive stretch has finally started to slow down. The number of new shoots and side branches isn't increasing much anymore, which means the girls are now putting all their energy into flower production. Bud development has really taken off this week, and all three ladies are already starting to build up a nice layer of resin. Papaya Cookies Papaya Cookies is still the clear front-runner. She's the biggest plant with the highest number of bud sites. The purple coloration is becoming more intense every day, and resin production is already impressive. Even at this early stage, her aroma is absolutely fantastic. Definitely my number one so far. Tangie Just like in my first grow with this strain, Tangie is taking her time. She's still stretching a little while slowly building her buds. Resin production has started nicely, and that unmistakable Tangie aroma is already coming through. I know from experience she'll reward my patience later on. Apricot Because I accidentally snapped her main stem during LST a couple of weeks ago, Apricot remains the smallest of the three and has the fewest bud sites. However, the buds she does have are incredibly frosty already. She's also by far the stickiest plant in the greenhouse, and her terpene profile is absolutely amazing. Every time I touch her, my fingers feel like they've been covered in glue. Feeding I'm not changing anything as long as the girls keep looking this happy. Currently they're getting T.A. TriPart nutrients at one-third of the recommended dosage twice a week, alternating with a weekly feeding of Bokashi juice. So far, they seem to love the routine. Pests Time to pay a little more attention. I've noticed some greenhouse aphids and quite a few ants on my cucumber plants. Luckily, none of the cannabis plants are affected at the moment. Since the girls are already well into flowering, I don't want to use neem oil anymore. If necessary, I'll switch to insecticidal soap, but for now everything is still under control. Final Thoughts I'm really happy with how this grow is progressing. The stretch is coming to an end, the buds are stacking nicely, resin production is increasing every day, and the first terpene profiles are becoming more noticeable. Now let's hope the good weather sticks around for a few more weeks. That's it for this week, my friends. Catch ya next week! Smoking_Joe_Frazier
Likes
15
Share
Greetings to all my friends from all over the world, greetings to you from Russia! Another week has gone and I am updating my diary. The plants show healthy growth, but when I arrived at a secret place, I found that one of the 400 watts burned out, so part of the tent was not lit. This lamp has served me for about seven years, but nothing lasts forever. When I did the defolation, the second 250-watt lamp burned out, but unfortunately it worked for more than a year. It's good that I had replacement lamps. Due to the problem with the lamp, one side of the plants did not develop very well. But despite this, the processes of the plant became of sufficient size so that I took them for cloning. I took ten shoots, placed them in a hormone gel and transferred them to Rootriot, moving the clones into the greenhouse creating a microclimate there. If you are interested in following the adventures of weed in Russia, subscribe to my diaries
Processing
Likes
2
Share
Looks super frosty and her resin is super sticky hate when they say you can't get the best quality organically. It's the same way around. Purest aromas,finest flavors,love to grow with nature and love this genetic by original sensible seeds 馃い馃敐馃拵馃崻
Likes
8
Share
Starting to look like a bag of cheesy dusting has been wafted around by unicorn farts on a barmy summers evening. Turned her around to slap her naughty side with equal and opposite neutrons or some shit like that. Boss
Likes
31
Share
@Chucky324
Follow
Hello. Got the plants into the main grow room. There is 2 videos . In the first I just sit in the room quitly and turn the camera. you get a sense :) of what it's like in there. In the second I try to describe what's in the room, equipment and maybe a new technique. With the tomato cages I use, and needing the plant to slow down, I twist the stock into a large figure 8. Eventually I take off what is on the lower part of the 8, and just work the top of the 8. About 2 weeks in veg in this room. Then I take clones of everything before I switch to flower. >Carbon dioxide enhancement: I had to make that choice 20 years ago. I could, rent a tank and have my name on a list, at the gas store. Or make my own. They didn't have the small propane tanks like they do today for the blue flame you get when you burn it. I decided on a kerosene lamp burning down as low as it could be without going out. It makes a half blue and half yellow flame. I vent constantly so the small amount of carbon monoxide is not a problem. For the first week you can smell it a bit, but the smell disappears after that. I light the lamp in the morning and put it out at lights out (unless it's bed time). It needs to be put in a place in the room that cant get knocked over (pets, children, ?). I try to use extra attention whenever I use it. It can burn down the place. Be careful Please. >About 17 years ago I thought I'd lower my table by knocking a hole in the cement and dropping my 10 gallon reservoir more. I was able to lower it by 16 inches. Still have to watch the height of some plants though, it worked out well. Watch the video. > Air cleaner: The reason I got a big 8 inch exhaust fan was, I had a bout of powder mildew and needed better a exhaust system. When I plugged it in there was too much air moving. I phoned and asked and the salesman said that a dimmer switch wasn't a good idea. I put one on anyway. Works great. I have the fan barely on in the winter and about half way on in the middle of the summer. I haven't had any powdery mildew since. About 12 years ago I bought a good air cleaner. An ORECK, It has electrified plates that zap any organic particle or spore that come between the plates. Use to grow a Northern Lights that got 6 to 8 ounces per harvest, it grew big buds. Buds as big as my forearm. I had problems with gray mold attaching the buds. But none since I bought the air cleaner. Ya learn as you go.
Likes
1
Share
@mihixd
Follow
D64 Saw the plants lower growth drooping so gave 4Ls during peak sun. D65 Defoliated the top growth nodes extensively, to allow the lower canopy to catch up. Cleared up lower canopy too and found some inhabitants馃悵 D69 10
Likes
18
Share
17-4-2021 ON FIRE : Wow what a good growt last week was crazy and what a big ass leafs! holy shit.. i think im gonna push the nutrions up 2 650PPM instead of the 550PPM now.. also still not in flower so that is good ! i only use the fish mix and still not biogrow i will do that the second week of flower, its very uniform so thats also great to see... i think im going to do some leaf stripping tommorow because thats needit ...i will do it strategic to minimalize the stress