Likes
Comments
Share
@Danylo
Follow
Preface: After initial germination I realized that I didn't have 6 little pots free so I had to 3D print some more. SHOUTOUT!! to Thingiverse user "seajseven" for the model! ❤️ - A 1Kg-Spool prints about 30 of these bad boys so they cost very little, especially in a pinch! =) I had some fears that the ANYCUBIC PLA+ I'm using would interfere with plant metabolism, but after seeing the healthy plants coming out of these pots I dont think these fears were justified. Going on... LOTS of other stuff happened this week! : These amazing! Peaches&Cream had rooted through their initial 0.5L pots a good bit faster than the ICCF2s. I know n=3 isn't really great empirical evidence, but all three have better roots than the ICCF2s, resulting in more vigorous growth. I'm guessing the Peach Candy F2 added some amazing root-genes to this cross?! While I was right on time for repotting the ICCF2 , these could have been done 1-2 days earlier! As with the ICCF2, fresh 3.5L Pots have been prepped with Floragard Professional Grow Mix as well as about 2g/L of an AWESOME powdered Tomato Fertilizer made by Sonnenhof. That shit has saved so many plants and I don't even understand why. You know... you try to do your best with your method BUT SOMETIMES you just have one plant that starts turning yellow and you don't understand whats going wrong?? I gotta repeat that I don't really understand the mechanism here... I'm guessing it is ph related but that stuff has saved so many plants for my brother that i'm now using it myself as an additive. All three of the plants are looking great and the middle one is looking even bigger! ❤️
Likes
11
Share
@PSK23
Follow
The plant has just entered the seventh week of flowering. During the previous week, the sixth, I performed three waterings, tapering from 5ml of Plagron Terra Bloom to 1.5ml per liter for the third watering. Now, starting this seventh week, I am beginning the flushing process with pH 6.0 water to maintain the soil around 6.2. The plant will spend the final 7 to 10 days flushing. Thanks to the pruning techniques used at the beginning, lollipopping wasn't necessary. I also apply a daily, meticulous defoliation method specifically targeting leaves attacked by pests like aphids or spider mites. Furthermore, I use Low-Stress Training (LST) on the larger inflorescences, pulling them outwards to increase light and air penetration. Drawn from years of outdoor cultivation experience, I shelter the plant under a gazebo or tarp during wet or humid nights and provide ventilation to prevent rot. I strongly advise this practice to all outdoor growers; after losing many harvests in the past, I will not allow bad weather to destroy my work.
Likes
10
Share
Likes
422
Share
Hi all, Welcome to my 🍌💜👊 week update. Thank you so much for your all support on this bananas journey 💜💚💜💚 Week 12 Jan 1 - Jan 7 I am so happy seeing how my girls are developing. All it's going great. 2 waterings of 8ltr on 03/01 no runoff and second on 06/01 9.5ltr! Runoffs PH at 6.2. Purchased larger dehumidifier and installed on 03/01 instantly humidity decreaseed from 55-59 to 50-55 on avg. and at night from 62-69 to 54-60. Light from 01/01 on max power output 110 watts. Nutes slightly adjusted. Buds on both girls gaining size, weight. Trichomes on Athena mostly milky and clear with only very few ambers. Xena mostly 50/50 clear and milky, They are smelling gorgeously, not sure if I should smoke or eat them first. Next week will still feed with nutes and keep an eye on trichomes development but it seems that girls are not in a hurry at all. That's okay me neither 😁 Stay tuned for next week entry very soon! Peace and love brothers and sisters ✌️💚 Links https://2fast4buds.com/seeds/banana-purple-punch-auto https://plagron.com https://www.biobizz.com/ https://fishheadfarms.com/
Likes
19
Share
I'd like to say. This is prolly the 2nd week into flower. For being what it is, I feel like there doing well. Will feed tomorrow there last feed was about 5 days ago but remember I'm going heavy with feed and letting them drink everything else thru the bottom. I also do have microbs in this soil. And add them after every feed.
Processing
Likes
13
Share
This little lady has grown so fast I haven’t even had the chance to take pictures. All try my best to keep up on her. Have her a nice bend or low stress training see how she goes.
Likes
234
Share
@yan420
Follow
This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 03.10.25 VW23 did a HST/LST session 📹 12.10.25 VW25 Done a major HST session to try and keep them in line with the Sunset Sherbet GF I have going in the same tent, rest in the video 📹 17.10.25 VW25 ffj/fpj/fish 30 → 60 ml 19.10.25 VW26 it just became a one plant diary, keeping #5, #6 gets it's own diary for testing nutrients. 20.10.25 VW26(?) Feed tweak: added 3 g Calcium Nitrate/ 30 L (≈ 15 ppm N + 10 ppm Ca) 24.10.25 VW26 did a defoliation and trimming session 📹 25.10.25 VW26 I'll be repoting tomorrow, 26.10.25 VW27 rest in the video📹 27.10.25 VW27 Epsom Salt 0 → 2.5, Calcium Nitrate 3 → 9 g 01.11.25 VW28 CalMag 60 → 30ml, TriPartBloom 20 → 30ml, Magnesium 2.5 → 3.5g 04.11.25 VW28 no more yellowing between the veins and no new spots, the changes to the schedule worked, rest in the video 📸 09.11.25 VW29 Did what I'm hoping is a last cleanup 🎥 12.11.25 VW13 Did another cleanup in the tent 🎥, also switched to the FERMAKOR PK Micro schedule, (10.11.25) added Phosphoric acid as a pH down in preparation for flowering 14.11.25 FW1 FERMAKOR PK Micros 40 → 50 ml 22.11.25 FW2 Calcium Nitrate 40 g → 35 g 05.12.25 FW3 about 2 weeks ago Calcium Nitrate 35 g → 25 g, FERMAKOR PK Micros 50 ml → 60 ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 29.11.25 FW2 – Fed 5l of #1 → 2l runoff 30.11.25 FW2 – Fed 5l of #1 → 2l runoff 01.12.25 FW3 – Fed 5l of #1 → 2l runoff 02.12.25 FW3 – Fed 5l of #1 → 2l runoff 03.12.25 FW3 – Fed 5l of #1 → 2l runoff 04.12.25 FW3 – Fed 5l of #1 → 2l runoff 05.12.25 FW3 – Fed 5l of #1 → 2l runoff 06.12.25 FW3 – Fed 5l of #1 → 2l runoff (*RUNOFF reused for indoor house plants) 💧💦💧💦💧💦💧💦 🌱 Nutrients in 30 L #1 Veg – FERMAKOR 💧💦💧💦💧💦💧💦 Calcium Nitrate (Calcinit / Nitcal): 45 → 40 g → 35 g → 25 g = 1.50 g/L → 1.33 g/L → 1.17 g/L → 0.83 g/L = 207 ppm N / 253 ppm Ca → 184 / 225 → 161 / 197 → 115 / 141 PK Concentrate (FERMAKOR Base): 30 → 40 ml → 50 ml → 60 ml = 1.00 → 1.33 ml/L → 1.67 ml/L → 2.00 ml/L → balanced 1:1 P:K + light micros (from extract) Home-made FFJ/FPJ (Fish + Veg): 30 ml = 1.00 ml/L Epsom Salt (MgSO₄·7H₂O): 8 g = 0.27 g/L → ~26 ppm Mg + ~35 ppm S Fetrilon Combi 1 (Micros): 0.5 g = 0.017 g/L → Fe 0.7 ppm · Mn 0.7 ppm · Zn 0.3 ppm · Cu 0.3 ppm · B 0.1 ppm · Mo 0.02 ppm Phosphoric Acid (pH down) + Citric Acid (chelation): as needed → First set pH with phosphoric acid, then add a little citric only if you want extra chelation Target pH: 5.8 – 6.0 (drop test yellow-green) 📦 TOTAL: Liquids: 60 → 70 → 80 → 90 ml per 30 L = 2.00 → 2.33 → 2.67 → 3.00 ml/L Solids (CaNO₃ + Epsom + Fetrilon): 53.5 → 48.5 → 43.5 → 33.5 g per 30 L = 1.78 → 1.62 → 1.45 → 1.12 g/L 💧💦💧💦💧💦💧💦 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done YouTube Link: https://youtube.com/-m8h?si=A7x4Zlr2kj-_ga31
Likes
4
Share
@pzwags420
Follow
On day 1 I changed out my reservoir, and added my bloom nutes, adjusted my light schedule to 12/12 and defoliated the plants. I adjusted the reservoirs PH to 6.1 My hope is that by flipping this cultivar earlier than my last run, I will not run out of vertical space ;). On day 2 I adjusted my reservoirs PH down to 6.1. On day 3 the clawing is almost completely gone. I adjusted the reservoirs PH down to 6.1. On day 4 the reservoir's PH is at 6.1. I defoliated the plants removing anything blocking lower growth to increase light and air penetration of my mains. On day 5 the reservoirs PH is 6.1. On day 6 I adjusted the PH of the reservoir up from 6.0 to 6.3. I will let the PH drift between 6.1-6.3. on day 7 the reservoirs PH is 6.2. I lowered the light intensity from 100% to 85% to give the top of my plant canopy an average PPFD of 700-1000. I plan to reduce the intensity as the plants continue to stretch to keep them in the 800-1000 PPFD range. I just got my first quantum par sensor and I'm really loving the new data it gives me to optimize my lighting.
Likes
39
Share
Las altas temperaturas han persistido es por esto que el riego ha sido más seguido variando siempre entre fertilizante y agua. Esta vez ya se utilizó Flawless Finish para este último proceso, una vez secándose el sustrato se comienza con la cosecha. Ha sido un buen cultivo. Veremos como termina esto. Seguimos ! 👽💪
Likes
9
Share
Looking nice now taking a bit for feed now The smell is definitely getting stronger now really looking forward the see these baby's in final stage also big shout out the @barnysfarm my seed have arrived today ready for launch. And new diaries tk come piece out growmies update few pictures when lights are off 🍋🍋
Likes
7
Share
@Wilstang
Follow
FF1 was an easy grow with no deficiencies, Harvested on day 59 with 101 grams or 3.6 ounces total. A great strain recommended for a beginner grow all the way to a master 💯🌱🌳
Processing
Likes
7
Share
@Yukagrls
Follow
It seems like she needed to be closer to the light so I moved her a closer. She is growing very tall and fast. I water her once every two days or when I see the soil is dry. :)
Likes
20
Share
Ist echt verrückt wie sie aufgeholt hat von der größe zu meinen anderen Projekten die schon älter sind.
Likes
13
Share
@Growador
Follow
How’s growing everyone, just to let you know that nothing new happened, the babies are in a fantastic shape. One of them is nearly ready so i will begin to flush it a bit. Otherwise, all is great, no defficiencies so i'm very happy. I hope you are all well in this terrific moment. The second wave is coming and i just hope we can all get well and do our crops. Have a nice day and a great weekend
Likes
19
Share
What a fun run this was ! These Ogreberrys finished up from 81 days to 102 days with nice hints of gassy , sour purple , sweetness and glistening with frost! These ladies will cure up for a month an will be ready to test out ! So much fun , I highly recommend this strain if your looking for some oooy gooohy resiny grape smelling nugs !
Likes
13
Share
@shwable
Follow
Everything looking fine so far. I gave them a little amount liquid grow enzymes with distilled water on 19.04. what seemed to boost the growth. If You have any tipps or recommendations feel free to let me know.
Likes
8
Share
@McGrowin
Follow
Day 57 and looking forward to harvesting. Hoping to dry slowly. Gotta chop with others all at same time, so just waiting on this girl to wrap up. What do you think - she about ready for harvesting? Harvest day 60 Found seeds, nanners and pollen sack - fucking lame. we grow again another day! Likely will make bubble out of this stuff.
Likes
3
Share
Likes
5
Share
@tNASTY3k
Follow
After toping the plant I started a Main-line technique to build the plant outward and aim to develop 16 main stems prior to flowering stage. I do not see any major genetic issues with this plant. She Has had a few deformed fan leaves and one of the 4 main-lines grew a node from a node. This was not going to be used in my training technique plan so I have since removed it. watering has stepping up to 28oz of distilled water pH balanced to 6.0~ (no higher than 6.5pH) I will also begin feeding the plant using the General Hydroponics Flora Series products. I don't think I'll need Cal-Mag so I'm watching closely for signs of deficiency before I opt in to purchase the nutrient.