Likes
Comments
Share
Привет всем моим друзьям с разных уголков мира. Я надеюсь своим примером, я показываю вам, то что партизанское движение возможно даже на вражеской территории, оккупированной клептократами. Если вы следите за мной, то вы знаете, что у меня подготовлено несколько партизанских отрядов. У меня было 40 растений Амурского гиганта, который родился в Амурской области, который входит в состав Дальневосточного федерального округа моей страны. Эти растения идеальны для выращивания на всей территории России. Я выбрал 30 самых сильный растений, которые проявляли гены гигантизма и вывез их за город на природу. Для того, чтобы удачно перевезти и трансплантировать 30 растений мне потребовалось очень много усилий, я расскажу вам об этом по порядку. Сразу оговорюсь, что у меня был один помощник, который выполнял всю физическую работу. Одному такое такой объём работы за один день сделать практически невозможно. Если вы один то, вы должны разделить свою работу на большее количество этапов, иначе вам будет слишком сложно. 1. В общей сложности ушло около 425 литров субстрата. Я взял 250 литров земли для цветов, добавил туда 115 литров вермикулита и около 60 литров гумуса – остатки жизнедеятельности дождевых червей. 2. Самым важным составляющим моего субстрата был гидрогель. Он удерживает до одного литра воды в течение 3 недель, даже перемешав его с землёй. У меня было 35 литров гидрогеля. 3. Так же у меня было порядка 30 литров чистой воды, в которые я добавил корневые стимуляторы и активаторы метаболизма. 4. Так же у меня было с собой немного перлита и пеностекла, но мне не хватило этих материалов на все растения. Но вы так же можете их использовать. После этого я выкапывал ямки, засыпал туда субстрат и добавил гидрогель, после чего трансплантировал растения. Мы приехали на место днём, но проработали на нём до самой ночи, пока на улице не стемнело. Как только все растения были удачно трансплантированы, мы удачно покинуло место, не включая фонарей или фар. Сейчас мне предстоит пересадить за один раз более 56 растений и перевезти практически 1000литров субстрата. Это крайне рискованно, но у меня нет другого выбора, так как была плохая погода долгое время. Если вам интересно следить за приключениями травки в России, подписывайтесь на мои дневники.
Likes
2
Share
@Chubbs
Follow
10 out of 10 on these lovely ladies. They popped up after being soaked for 48hrs then 48hrs after being planted we had sprouts. Excited for these as it's been a little while since I last grew it. Last time it won be 2nd place at the universe cup for Hash. This year it'll go to the 2026AAC. Happy Growing
Likes
14
Share
4th week of flowering done and all are doing well, they're starting to fatten up and getting a lil sticky and smell coming along nicely now. Will continue feeding every 2 to 3 days with nutes ec to 1.8 , ph 6.8.
Likes
15
Share
@MrGrowMan
Follow
Week 13-14 1 nutrient water 1 non nutrient water LsT and Scrog Diesel and Mimosa (front 2) auto day 62 start 12/12 light period 2 break up cake day 67 start flowering Mimosa and Diesel (front 2) Flush 30.01
Likes
15
Share
Hey guys :-) Unfortunately I had so much to do with the flowers that I hardly had time for the veggie update last week :-) I trained the ladies with LST and topping. I will do that for a while because you still have time until there is space in the bloom tent 😅. They were watered twice a week with 1-1.2 l each time (see table above for nutrients). Tomorrow they will be treated again with nematodes against tripse because I saw some in the vegi room 😡. Otherwise everything was cleaned and checked. Have fun with the update 💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
6
Share
@RzDreams
Follow
Floración Dia 40 al 46, Sexta semana 05/12/2022 Riego😰 Indoor sin novedad, continúa engorde 09/12/2022 #04 Exterior Se nota gran cantidad de tricomas blancos. 11/12/2022 #04 de exterior con 4 días más de floración está casi a punto de corte, se nota un 90% de tricomas blancos, se continua con observación diaria.
Likes
5
Share
She's actually not using as much water as I'm used to with other plants. I went a good week without watering her, and she didn't show any signs of needing more. So, after almost 10 days, I fertilized her again.
Likes
7
Share
Likes
8
Share
@tuzeus
Follow
Buds are starting to thicken up. I changed my nutrients like mentioned in the last post. Maybe I will defoliate in a couple days but I always remove a couple leaves every 3 to 4 days. Let’s see. My only concern is that they look like they don’t fit into my tent if they thicken up too much. I mean it’s better to cut a few branches off than having too less.
Likes
18
Share
Über Ostern jetzt hatten wir sooo gutes Wetter... Ich konnte nicht wiederstehen und hab Sie nach draußen gebracht... Sie liebt es. Bis dann growmies 🌱💚💪😎
Likes
4
Share
@fivegrow
Follow
High temp and humidity! Leak smell and slowly grow.
Likes
14
Share
@AndrewC
Follow
This week was a good recovery week, after this previous disaster at the beginning of the week. They took about 3 days to bounce back. I had to defoliate pretty heavily. You can't tell 4 days later that I did. I wanna avoid defoliating too often, as these poor buggers are already stressed. I think in about 3 days I will see if they stop growing in height, when they do... I will defoliate again. All for all, I'm pretty happy that they bounced back so well. I also have upped the EC a touch to 1.5 this week, and I'm only seeing the tiniest hint of tip burn. So I think they are at the max before it starts to really burn them. The rate they are drinking, its a struggle to keep the mix at 1.4.
Likes
23
Share
March 12, Day 71 my Sea Of Green is now a Sea Of Buds 😄 Tomorrow I will collect the three plants closest to the poster that seem to be mature. Next week I will collect the last two gorillas (excluding the two plants with a photoperiod predominance) because they seem to need a little more time. March 13, Day 72: I wanted to make a video or a video to show you the defoliated plants ready to be cut, but when I removed them from the SOG they no longer had the support of the nearby plants and the branches could not support the weight of buds. I'm not complaining, in fact I didn't think I would get such a big harvest. For the same reason I only cut and put to dry two plants, I don't have enough space in my dryer that is only 50x50x120 Centimeters. However, I made a video with Harvest and a video with the new layout of the plants in my SOG. Now in my sea of buds there are three gorillas left, two cheese in advanced bloom and two photoperiodic gorillas and the margin there is a Cheese that has just started to bloom. I realized that I can make only one harvest page for each variety, I thought it was possible to create one for each plant, so I will edit the diary for the final harvest, when I will also collect the last three gorillas in my secret garden. Thanks to everyone for the views and likes 😉
Processing
Likes
41
Share
Welcome to the Sweet Seeds Cup 🏆 Hi everyone 🤗. This week she developed her buds incredibly well 😍. The flowers smell really unique now. The look of the flowers is exactly to my taste. @ SweetSeeds, I can only say it every time it's a perfect phenotype 👍. From next week I slowly go down with the feed, which slowly starts to consume the feed in the soil. All in all a great week 😊. I wish you all a lot of fun with the diary, stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at : https://sweetseeds.es/es/ Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
52
Share
@DevilsBud
Follow
New week for the 2 purple berry Kush I think the purple berry Kush needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
2
Share
Likes
21
Share
@Whitebelt
Follow
Beginning week 9 Plans this week: Make a long time lapse while away this weekend - post more photos too Lollipop Tuck and tie a bit Possibly build a second scrog level?? Thoughts anyone?? Research and purchase or build a “grow room controller” - tent: temp, rh, light(?), co2(?) — rez: ph, ec, temp, water level - maybe more stuff like tie in the cameras, also basement temp and rh, fan and lights and pump contro. Nutrient dosing and ph control would be awesome but likely too pricey— but I’m a geek and this will be fun! I’d prefer a prebuilt system but I’m not totally opposed to building an Arduino/pi style solution (reliability and time to get it right are concerns tho - plus I have an arcade cabinet project I’d like to get to soon) — **ANY THOUGHTS OR ADVICE ANYONE??? To do list: I picked up some angle aluminum and I plan to finally make a single frame for the numerous LED lights Mount things to the wall (temp and humidity sensors, timers, utility light, etc) General cleanup and house keeping - wire management etc Install new portable air conditioner in the basement - this will be a bit of a project - casement windows and other issues Hopefully this week: install a utility sink in the basement and tie into the water lines and waste lines of the house (no more carrying water and waste upstairs!!)
Likes
7
Share
Due to construction and revamping of our space, we had to leave all seedlings in their germination dome for approximately a month before getting them into veg. In order to not run into any space issues within the small dome, these young plants were kept under a low-wattage fluorescent tube to avoid any growth which may have been "too vigorous." VEG WEEK 1: 03/09/2021: (Image 1) Each plant was potted into, and fed with the following nutrients during transplant: 1. 5l FF F1 medium 2. GHF: Biogrow - 15g worked into medium 3. Wormcastings (workd into medium and astop dress) 4. Organics Matter Mycoroot Supreme -placed at the bottom of the planting hole. 5. Watered each plant with a Silicon Plus feed solution . 07/09/2021: (Image 2) - All plants are now in 5l pos with Freedom Farms F1 medium, and are in their new veg home under a 3500K 320W Quantum Board. - The 3 weakest seedlings of the total 19 seeds (1x Crit and 2x PC) were placed on the left side of the tent, and in different pots, as they are obviously struggling and may not even make it into our final flower room.