Likes
Comments
Share
june 29. Megacrop ~2 litre feed number 8. 1.17gr/litre. ph 6.11 july 3. Megacrop ~2 litre feed number 9. 1gr/litre. ph 6.11. Snapped a branch by mistake. Tried to tape it without success :( july 5. Megacrop ~2 litre feed number 10. 1gr/litre. ph 6.11 Keep performing some light defoliation almost every day.
Likes
54
Share
@nonick123
Follow
Bienvenidos a la semana #7 😀😬😐🙏 Día 46 (26/06) CC & RB han reaccionado super bien a los nuevos abonos! Tienen un verdor espectacular! NL no para de engordar, y tiene el olor típico de las Northern Lights de la Old School. Vaya pasada!  😀 Las OF siguen consumiendo sus hojas de abanico y tienen el mismo tratamiento que el resto... Me da que es una cepa bastante débil... 😑 Día 47 (27/06) Continuamos con organic way!  Se echa en la parte superior del sustrato 11 gramos de harina de huesos 11 gramos de guano de murciélago (por planta)  Se riega con la siguiente mezcla: 1 ml/l de Melaza + 30 ml/l de Té de Hummus OF#1 = 250 m lCC y RB = 500 ml NL = 1.000 ml NL está cogiendo un grosor de cogollos y un olor de la vieja escuela brutal! 😬 Día 48 (28/06) Día nublado. Nada que decir Día 49 (29/06) Mi primer riego con EC controlada Gracias maestro @deFharo por los consejos!  Mezcla: 1 ml/l de Melaza + 40 ml/l de Té de Hummus en agua del grifo reposada ph = 6.5 EC = 1.6 OF#1 = 250 m CC y RB = 250 ml NL = 0 ml (la maceta está muy pesada)  Día 50 (30/06) No hay necesidad de riego Los colores son impresionantes y los cogollos están engordando y cubiertos de tricomas :-D Día 51 (01/07) Gracias al maestro @deFharo introduzco una nueva receta al cultivo: el Guanato Os la dejo más abajo, pero el mérito es todo de @deFharo  Mezcla de riego: 1 ml/l de Melaza + 5 ml/l de Humato PK + 5 ml/l de Guanato en agua del grifo reposada ph = 6.4EC = 1.680 OF#1 = 250 ml CC y RB = 500 ml NL = 1000 ml __________________________________________________________________________________ Receta de Guanato Ingredientes: 125 gr de guano de murcielago 1 litro de agua (osmosis o grifo reposada) 25 g de hidróxido de potasio Pasos 1- Disolver el Hidróxido de Potasio en 500 ml de agua 2- Añadir el guano de murcielago y remover 3- Revolver o agitar varias veces 4- A las 24 horas añadir el resto del agua (500 ml) a 40 - 50 ºC 5- Revolver varias veces al día durante al menos 3 días (alargarlo hasta 6-7 días si no hay prisa)
Likes
26
Share
@GroloCup
Follow
We'll call this the beginning of week 1, she's up and growing. The MegaCrop should push her growth a little and really get her off on the right foot. Debating topping or LST, not sure how this one's gonna play out, but I'll see how fast she make a vertical move before the final decision is made. Thanks again to Zamnesia and Plagron for the opportunity to grow some dank buds!
Likes
3
Share
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
47
Share
Cracked a few stems, twisting them 2, 3 points in the main stem and once on each lateral stem, very early monstercropping, cracked the stem without rupturing xylem or phloem channels, minimal recovery, maximum stress and response. There is a new need for significant reinforcement. I know this knuckle will eventually require the throughput of a superhighway. No point in dilly-dallying. Growth grinds to a halt, at least it feels like that. Energy is now distributed fairly evenly to each stem at equal heights and equal light intensity. Growth is not slower; there is just far, far more to do all at once in equal measure, start raising her soil EC up to 1.0mS/cm and maintaining. Upped to 40DLI for now. Temps back in the daytime 87+ range. NPK Raw Grow to keep the soil water solution at 1.0ms/cm, thereabouts. Enzymes and amino acids are applied foliarly to the underside of leaves each night 🌙. Aim to coat the undersides of the leaves where the majority of the stomata are located. Use a spray with smaller droplets to increase the surface area of the leaves that are covered. Adding a surfactant to the mix can help the spray spread better on the leaf surface, improving absorption. Just remember not to add anything immobile.. Heat denatures enzymes. "blah blah what's the point? It's hardly going to do much." Plants have a surprisingly low photosynthetic efficiency, typically converting only 1% to 2% of the total solar energy that hits them into chemical energy. (Too much defoliation and high VPD all night). In fully optimized conditions, that rises to 6%-8% efficiency. Plants may use approximately 25% of their respiratory energy (50% of total respiration) for enzyme turnover, which includes production and repair, but the exact energy cost for heat damage repair is not specific, as the total respiratory energy is not definitively given for plants. Plants generally have a high protein turnover rate, with enzymes making up a substantial portion of this turnover. 10% total ATP is photosynthetically processed. 90% total ATP is processed during cellular respiration. 25% -50% total respiratory energetic output is spent on enzyme turnover (Ballpark). Sounds like it's worthwhile to me. The longer you have waited, the harder you must swing.
Likes
5
Share
@DrBud420
Follow
01.07. White Runtz Day 63# Condition much better. On the plant, after the last update, the crap started to spread, 2 or 3 days after the last update I removed a lot of destroyed leaves, from then until today it is no longer spreading, this morning I noticed (probably not earlier) on 2 leaves it is barely visible and a little while ago when I went around the plants I noticed that it had not spread at all, so I can freely say that the plant has recovered, and it was the second in the row in the most critical condition. I removed those two leaves and I'm still monitoring the situation, but the plant is already growing nicely and has put on a lot of leaf mass, so almost as much as it lost, it's healthy, don't complain, I think it's recovered. The last two waterings she received only clean water, the next watering is food, stimulators, vitamins, amino acids… Today is the end of the ninth week for the plant. Stay High and Keep Growing!!!
Likes
13
Share
@BigDaddyK
Follow
Changed to flowering nutrients DWC changed led to 12 hrs on/off Watering every other day about 2 litres each soil pot = just ph and mammoth p Also ARE YOU SERING THIS ? These look awesome - on 80% power Soil plants always grow quicker at the start , but one r the roots are established in DWC , well you’ll see 😉 Got some serious eating going on , watered soil 2l each Tuesday
Likes
1
Share
She's a stinky girl. Canopy is holding fairly uniform to this point still. Moved to floor, no booster seat anymore. She's a quick, 21-28 days is my guess.
Likes
23
Share
@Ferenc
Follow
Day 58, 11th of November 2020: I set the lamp 15 minutes shorter to switch off earlier so she receives 11:45 of darkness. I would like to imitate the nature when longer nights come with time till the 4th week (when she will receive 13 hours darkness a day 15 minutes minus 4 times = 1hour) so every week 15 min longer darkness for 4 weeks and then back to 12/12 to have bigger buds from the 4th week.... I think whe will flower longer I have got that feeling. Nice strain growing properly. Good job Zamnesia.... Strech should end soon, however she did not strech that much due to training... Fertilization happens every 2nd day with the mix and ratio above. Let's go ;)
Likes
1
Share
@tigerbomb
Follow
il ramo secondario piu esterno è anche quello piu cresciuto, è gia quasi al limite di altezza non so se continua cosi dovrò finire per topparlo o rischio che sia troppo vicino alla lampada ma se cosi fosse, quando sarebbe l'ideale topparlo? siamo gia in fioritura stresserei la pianta e rallenterebbe lo sviluppo, non so
Likes
23
Share
@Fatnastyz
Follow
10/30 I made a boo boo and these go on last weeks. 10-31 Happy Halloween! 11-5 Day 62 Just water and chill.
Likes
14
Share
Vamos familia cuarta de floración de estás Punch Pie de RoyalQueenSeeds . Que ganas tengo de ver el progreso de esta variedad, las plantas están sanas, se ven con buen color. La cantidad de agua cada 48h entre riegos, nutrientes de la gama Agrobeta. Esperaremos que no me suba mucho la temperatura , por el momento se mantiene entre 25-26 así que lujo. Esta vez me pasé un pelín con los productos pero echaré agua destilada y en unos días apañamos. Estas próximas semanas veremos cómo avanzan y progresan estas flores. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨.
Likes
3
Share
Likes
12
Share
Week went smooth had to do some more defoliation doing one more next week and cleaning up all the bottoms and any fan leaves in middle that face inward to help light and air flow through em I been pushing these ppms I’m trying to get my ec uo to like a 6 rn it’s at like a 4 but it’s a work in progress
Likes
2
Share
@InsideAz
Follow
Not much growin on this week just watering and letting them grow. No smell yet Increasing light to 80% Nutrients in previous week and next week
Processing
Likes
7
Share
The plants are still growing at a good pace. Just finished their 1st week on 12-12. They definitely filled out so we went ahead and did like a 40 % defoliation to help the light get through all those branches. Waiting to see the start of the stretch and some more early signs of preflower. I was short on time or inwould have more up close shots of early signs, I'll edit mid week and update on how they bounced back from the trimming.
Likes
33
Share
@Roberts
Follow
Cali crasher is doing great under the Hortibloom Solux 350. She is starting to bulk. She has a nice resin layer going and good aroma starting to develop. Nothing else to report at the moment. Thank you Hortibloom. and Doctor's Choice. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g