Processing
Likes
Comments
Share
Been feeding the nectar for the gods sample pack. Plus impello biologics inoculant. Experimenting with lst. Hasn't been topped or defoliated at all. Just tying down and tucking leaves. I cut my pot as well to allow more lower air circulation. There are 9 visible "tops" at the top of the canopy. And a couple more that are underneath. Day 32 and everything is looking good to me.
Likes
8
Share
@Oldwied
Follow
18h in 0,5% H2O2. Soil: The living soil was from Dope soil. The soil was used for one grow and keep alive over 5 months. 1 month ago i gave some new compost (5L) a new mulch cover. Compost tea 900 mL compost + 10 L rain water, brewed for 18h.
Likes
37
Share
Progress and Observations In week 6 of flowering, my plants are displaying significant development. The buds are swelling noticeably, and resin production is increasing, filling the grow area with a rich aroma. Weather Conditions and Plant Health Unfortunately, the weather in Germany has turned to consistent rain over the next five days, which is less than ideal for the final growth phase. To protect the plants, I've moved them into the greenhouse full-time. This controlled environment shields them from adverse weather conditions, ensuring stable conditions for continued growth. Pest Management I'm pleased to report minimal pest issues thus far. Nightly patrols continue to manage the snail population effectively, supported by lettuce leaf traps. There have been no signs of spider mites, aphids, or thrips, providing relief. With the ongoing rainy weather, I remain vigilant against potential snail problems. Low-Stress Training (LST) Update The plants I trained with LST have responded positively and continue to develop well. I did some more LST to maximize light to the colas. The canopy remains even, and the bud sites are receiving ample light, allowing for a slight upward stretch to maximize bud growth during these final weeks of flowering. I try not to cut off any fan leaves because I think they're here for a reason. I like to tug them behind the steam or the side branches. Only if the leaves show significant signs of illness or pest then I remove them. Looking Ahead As we move further into the flowering stage, my focus will be on maintaining optimal conditions to maximize bud development and resin production. I am also diligently monitoring the humidity levels in the greenhouse, as this is crucial for preventing mold growth. The plants are looking promising, and I’m excited to see how they progress in the coming weeks. Update 03.07 What is noticeable is that both untrained plants are entering the full flowering mode faster than the trained ones. Have you had similar experiences? Update 05.07 Today I checked the girls and found the Banana purple punch with the top leaves starting to curl down. After asking the community I found out that everything looks like a starting nitrogen toxicity. But only on that plant. Seems kind of strange that the others having no issues at all despite having the same amount of nutes. I decided to treat the symptoms a once so I flushed with 5l PH water. The first runoff was a little lower (5.5 / EC 1.09) but not really concerning. Afterwards I give the plant the half amount of the tripart flowering scheme (with added CalMag 2 ml/l PH 6.2). Thanks again to AsNoriu and Hashy Stay tuned for updates and like always, feel free to give feedback about things I can improve🍀🥦
Likes
21
Share
@Rap_a_cap
Follow
No rain from April, it rains the day before the harvest........WTF Perfectly ripened, this half of a plant will become among the prettiest buds ever grown. See U in few days for harvest. Spoiler: great smoke!
Processing
Likes
15
Share
@MG2009
Follow
05/19/2020 All going well, have to grow in containers this season, I might be moving before harvest so only veggies in the ground. But all are adjusting well 😊 I will give more details on individual plants shortly #1 is10" tall new growth looks good getting thick. #2 is 11.5" tall #4 is 7" tall but healthy #5 is 16"
Likes
Comments
Share
First week of FLOWERING STAGE I must have done something right two grew up huge and waited as long as possible to flower ( great for autos ). Did heavy LST on 4 of em 0 damage I bent the tallest bus by slowly massaging the trunk and te downs watering every three days up too 800 ppm of Fox Farm Cutivation Nation 4/35/26 PK Booster and 550 on small 1 gallon pots I put in worm castings pulverized egg shells 10/10/10 slow release granules and Mychorizal additives and gypsum granules mixed into the top soil I water with spray first a cup or two and do a light foliage on plants then I water appropriately 1.5 liters each third day
Processing
Likes
1
Share
Likes
42
Share
Hey everyone 😀. These weeks they have continued to develop very well 👍. They have made a huge leap forward since they were repotted 😃. They will be topped again this week, and will then move to the flower tent next week 😍. I am very curious to see how it will develop until next week. I wish you a lot of fun with the new update, stay healthy 🙏🏻 and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/cream-caramel/ Type: Cream Caramel ☝️🏼 Genetics: Blue Black x Maple Leaf Indica x White Rhino 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
26
Share
My first grow has been a great learning experience, and I couldn’t be happier with the results. From the reliable BioBizz soil and nutrients to the impressive performance of the Spider Farmer SF 1000, everything worked well together. Each component contributed to a successful harvest, and I’m excited to continue experimenting and improving my setup with new gear and techniques. 💚☀️🤙🏼
Processing
Likes
6
Share
@PoshGrow
Follow
Welcome to Auto Alaskan Purple Grow by PoshGrow! 🍀 Week #3 2020 August 6th - 13th. General Info: When planted: 2020 July 23th. Week: 3 Days: 14 - 21 Last Update Day: 2020 August 10th. Plants: 5 Alaskan Purple Auto. Equipment: Tent: MarsHydro 1mx1mx2m or 39"x39"x72". Light: HLG 260w V2 Rspec QB Kit. Exhaust: 4" 322 CFM fan + Viper Carbon Filter. Intake: 4" 100 CFM Inline Fan. Oscillating Fan: Lower: 4" Ram Fan. Upper: 16" Oscillating Ram Fan. Humidifier: Taotronics TT-AH001. Dehumidifier: Pavlit MD750. Soil: NPK soil 40% Compost, 50% Peat Moss, 10% Agroperlite. Pot: 7 gallon Fabric Pot x 5pcs. Nutriens: Fox Farm Trio. PH Correcton: Chemoform pH-Minus Granulat. PH Pen: Cheap Chinese one, I callibrate it every time I use it. Water pump: Digital microscope: Comment:
Likes
18
Share
@BezzyB
Follow
Idk if this is a auto anymore or my lights r just weak need help give me feed back guys
Likes
58
Share
@HighTV
Follow
I highly recommend these Auto-flowering genetics. The harvest was above expectations and slightly behind schedule, but I have very little negative to say about this Strain or this grow cycle. I am looking to develop a top down drip system to speed up the seedling/clone stage a few days for even better results. Because of these great results I am looking forward to my next FastBuds strain. This next grow I will be picking up local clones here in California perhaps this time a purple theme. 😎 ______________________________________ If you enjoyed this Diary feel free to follow me here on Grow Diaries as well as Instagram and Youtube to see the rest of my content 😘 INSTAGRAM: https://www.instagram.com/hightv.ig YOUTUBE: https://www.youtube.com/channel/UChV8yzZviLCHpGAktvr6r0w NEXT GROW: https://growdiaries.com/diaries/14740-purple-punch-granddaddy-purple0
Likes
16
Share
Indica/Sativa Hybrid. Chitrali #1 (IBL) x Skunk no.1. Tall growing kush with a high yield. Lemon zest aroma with a sweet kush flavor. Lemon Cream Kush was cloned straight from original Chitrali #1 seeds, which we got from Pakistan (Hindu Kush valley) and stabilized using one of our proven Skunk #1 fathers. By extensively selecting and backcrossing the Chitral we have formed a very stable strain; stress proof and with only a few phenos. Our Lemon Cream Kush is an Indica/sativa hybrid with rock hard nugs and massive resin production. She has been long time favoured strain in Holland. Lemon Cream Kush is taller in stature and stretches a lot during flowering. She gives long dense kush buds. She is ideal for SCROG and very well suited for growing in more moderate climates, Indoor flowering takes 8-10 weeks, outdoors she is ready for harvest in October. Her smell is lemon with a piney twist. Delicious tasting bud with a sativa euphoric high and a mild bodystoned effect. There is no raciness or paranoia whatsoever, making her ideal for daytime medication against chronic pain and stress.
Likes
6
Share
Agora sem aplicações de técnicas, apenas fertilizantes e água, para que a energia da planta seja usada nos botões, quero ver lindos botões, densos e resinados . Por enquanto estou bem satisfeito com o resultado, essas próximas 3 semanas , acredito, serão decisivas para definir um boa produção.
Likes
1
Share
Likes
12
Share
@yd_grows
Follow
Decidi arrumar as plantas utilizando arame rígido para espaçar melhor os Buds e garantir circulação de ar e luz para todas as flores. Produção de resina começou a aumentar essa semana, se tornando visível a olho nu a quantidade de resina nas flores. Percebi que as pontas das folhas estavam queimadas, o que é sinal de nutrientes em excesso. Decidi então utilizar água sem cloro para lavar a terra das plantas. Utilizei 5 litros por planta. Como está chegando ao fim da floração, não pode ter tantos nutrientes na terra.
Likes
161
Share
START OF WEEK 7 DAY 42 ⭐️Nutrients Used⭐️ Front Row AG Part A 4.2g per gallon Front Row AG Part B 2.8g per gallon Front Row AG Phoszyme .4g per gallon Front Row AG Si .5ml per gallon Front Row AG CleanUp .2g per gallon This has been an awesome week. Plants have once again almost doubled in size…almost. I cannot stop them from growing out of control and they are suppose to at least double once flower is initiated. So, this week I will completely defoliate all the big fan leaves and after 7 days healing switch to flower. I have never completely defoliated my plants, but I’m open to new things. Usually I defoliate and lollipop at the 3rd week of flower. Until then I leave them alone with little stress. All in all, I want a full net but also an easier time during harvest so I’m going to remove all the big fan leave’s multiple times this run. Lights are still on 40% and will gradually get to 75% by week one of flower. All my co2 tanks will be filled this week. I want high temps/high humidity/lots of par/lots of co2. ⭐️THIS IS THE OBJECTIVE⭐️ for the first 6 weeks of flower 👇 1500 on par meter 80-85 degrees 60-65% humidity 1500ppm co2 This is how we get 💪 size colas! Thanks for stopping by and see you next week.
Likes
33
Share
@Belverde
Follow
Welcome growers This is the last week in vegetation for my two BLUEBERRY CHEESECAKE 🍰 Last week's topping had a positive effect on one of the two, while the one that is growing in its most natural form has started to develop the lower branches a lot, also thanks to HST techniques...in this case Supercropping.. Both have a very sturdy stem, also given by the 24/7 ventilation from the first weeks of life 🌱🌿🌳 The color of the leaves is a nice green, the one wich is griw in most natural one is perhaps in a slight excess of nitrogen...but that's ok The general appearance of both is of full health 💪 In a few days I will probably go to defoliate a little ✂️✂️ Anyway In this week i have reduced the lights cycle from 16/8 on/off to 14/10 on/off 💡 At the same time i have increase the intensity of my two led SP3000 from 50% to 75% and im going to put them at the maximum potency after the switch at 12/12 The two led panel are connected with a cable and i have only to adjuste the dimmer of one of them for change the intensity of each one, in just one move.. About nutrients 👇 In this seven days i still giving their always organic/veganic nutrients.. A little bit of silicium (Bionova) / Activator (Biomagno) / Crescita (Biomagno) / Activera (Biobizz) / Grow vegan (Bionova) / The Missing Link (Bionova) / X-Cell (Bionova) / Bioheaven (Biobizz) for the first time and a little bit of P-K 3-5 (Bionova) {not in spray solution but mixed with the othersone in to the water} Like i usually do, a little bit of everything at any watering 💧 And that's all.. This was the last week before flowering.. So stay tuned, maybe we will see some fire 🔥 Thanks for watching 😎👍👍 FC ✌️ 🇮🇹
Likes
19
Share
This week went real well! All 5 of the Twenty20 Ogreberry Autos and the 1 Fastbuds Bruce Banner have successfully germinated and sprouted up from the soil!! This upcoming week we will start giving these girls a heavy feeding of nutrients PH d at 6.5 an see how they react , most likely will love it!! Temperature an humidity has been on point, through out the day we reach 70-75 degrees an a nice humidity of 65%which is always nice ! Hope you all enjoy an keep them eyes peeled for next week !! Peace, love, an positive vibes to all you Growmies out there! If any questions please feel free to ask , more then happy to help! Cheers everybody to another great grow!!!
Likes
27
Share
2025-10-15 2025-10-15 The Shaman was cut today. It's always bittersweet for me when it's time for harvest. Like every time I've grown her, I had so much fun and joy—just looking at her brought me happiness. SHAMAN is a keeper in my outdoor genetics. She is easy to grow from start to harvest, always a pleasure. Despite the fact that this year she took longer to mature, I can't blame the genetics—all my outdoor plants were 3-4 weeks later this year. It was simply the conditions. Let's talk about conditions: The soil bed is prepared in autumn the year before and refreshed in springtime, so the plant always has at least 60 cm of deep, nice, and fluffy enriched soil base filled with microorganisms, microbacteria, and mycorrhizae. The roof is the most important part. This year I added 2 SCROGS—that was great! She stayed stable during heavy wind and rain and kept on shining after the storms. I'm very pleased with the outdoor season overall, despite a very cold and wet spring and summer with only short periods of hot and sunny weather. The girls in my garden didn't care and kept growing and blooming until the last day. Thank you @DutchPassion_Official for the seeds—I still have 2 left for next year. My first Attempt with SHAMAN https://growdiaries.com/diaries/27066-shaman-dutch-passion And the second Run https://growdiaries.com/diaries/106092-grow-journal-by-mrs-larimar Breeders Infomation: Shaman is a solid, highly powerful F1 hybrid. This mostly sativa strain has the THC level of 13.7%. It consists of 75 % sativa and 25 % indica. It is perfect for the outdoor and greenhouse cultivations. The plant is resistant to the mould and the bud's rot due the open structure. It has a big intermodal distance between the buds. The flowering time is 8-9 weeks in greenhouses. The plant reaches 1-1.5 m in height. The sweet woody smoke brings a sensual high-quality sativa effect. I hope you all enjoy reading my diary. stay hydrated legalize worldwide