Recommended
Processing
Likes
Comments
Share
03/08/20 cambie el fotoperiodo a 12 horas. Empieza lo bueno
Likes
46
Share
Stretching a lot at the moment, strong smell for only 2 weeks in flower. Pistils are now visible. As buds start to form. I moved the centre plant out as it was shorter than the others so looks a little more roomy now.
Likes
2
Share
@Cornfed
Follow
This week I added a new controller to handle up to 8 functions. I installed a new heater, my old humidifier and some LED strips to the controller. Targeting a VPD at 1.0 day and night. Trying to keep the nutrient ppm under 900 and ph at 6.0 in the reservoirs. Ordered a second ph pen because I don’t trust my readings. Will be here by Thursday. Friday: Checked the ppm in the reservoirs and it’s at 1,000. Added more RO water with extra nitrogen to bring the ppm level down to 925. Saturday: I installed an updated AC Infinity controller 69 Pro Plus (controls 8 pieces of equipment) which allowed me to add a humidifier, corner LEDs and a heater to the controller. Overall I’m extremely impressed with this AC Infinity equipment. My VPD is within the range I want to achieve (.8-1.1). I programmed it to maintain 78 degrees and 67% humidity during the day, 73 degrees and 63% humidity at night. Charts posted also show the impact of an open tent compared to the closed environment. The heater is constantly pushing fresh air into the tent, so I don’t need to cycle the exhaust fan often. Rewired the tent again and moved the controller later that night. I mounted the controller on the wall. Added Mars Hydro UV/IR lighting to fill out all 8 slots on the controller. Sunday: I checked the ph in the reservoirs (6.8….i had filled it with 6.0 ph) and the ppm (1200 ppm…I had filled it with 900). So evaporation and possibly a mismeasurement of ph. I topped ff reservoirs with slightly stronger nutes and adjusted ph to 5.8 in the reservoirs. Poor magnesium absorption could be driving some leaf yellowing. Effective tomorrow, I’m switching over to Heads Formula which consistently feeds GH Flora series nutes at Micro (6ml/g), Bloom (9ml/g) and cal mag (3ml/g). Turned on the UV/IR lights for 3 minutes every 8 hours. I’m easing the plants up to 5 minutes every 6 hours which will provide the recommended 20 minutes of IR per day. This will help the plants stretch a little more. Monday: checked ph and ppm in reservoirs. 6.1ph and 880ppm. VPD remains stable except when I open the tent. Tuesday: checked ph (6.4) and ppm (880) in reservoirs. Added .5ml of ph down to two reservoirs. Still see slight yellowing between the veins but it’s not getting worse (might be improving). Adjusting ph down to 6.0 target might have solved this. The plants grew by 1-2” last night…..is the infrared light working already? Decided to mix up fresh nutes for the reservoirs following Heads formula. 6ml Micro and 9ml Bloom per gallon of RO water. Added 5 ml of CalMag too. Ending ppm was 1080 which is too high, so I diluted down to 880 with RO water. 6.0 ph. Wednesday: plants grew another .75 inches last night. I topped above the 5th node. Thursday: added RO water with heavy cal mag to reservoirs to increase amount of CalMag available.
Likes
2
Share
Looking okay the one in back is more frosty than the front smell is nice
Likes
17
Share
Processing
Likes
10
Share
@GrowerGaz
Follow
The plants still look a little hungary , but with the temperature outside dropping it has been down to 19.5 highs in the tent. So rather than adding my 500w heater , I have thrown in a Easygrow 100w led QB with Samsung H leds. I have given them a KNF foliar feed and bio enhancer yesterday, I'm hoping more heat and light will get them feeding well again.
Likes
18
Share
@Joni2017
Follow
It's not long 😬😁👏🏻👏🏻 during the week we'll see how are these trichomes😉 watered once with the aerated mixture of compost tea pk booster 15gr and 5 ml of orgatrex 👏🏻💪😋 the rest of days with water alone 💦💦 temperature 27º C ☀️ humidity 65% 💧and music 🎼 😉👍
Likes
10
Share
It's HUGE! first time ever i have an autoflower that big and heavy!!! Seems like NFT works really well on autos.
Processing
Likes
8
Share
@Reaper
Follow
march 10: start of week 8 (pictures) the video of this week was from day 55
Likes
19
Share
Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D57/F18 - 19/10/23 🛠️ EC 1.2 (stable) pH 6.0 (rising) --> EC 1.1 pH 6.3 🌊 Added water and nutes (B52, Big Bud and Bud Candy, only little bit of Bloom A and B) 💼 Little defolation and some adjustment on the little one. As I saw some light stress symptom I changed the light schedule to 12-12 but with red lights always on. 🧠 I can't wait to see the buds of Little Marlene reaching out Big Marlene 🚀 Little Marlene is now quickly blooming. Some light burn symptoms on little Marlene ________________________________ 📅 D58/F19 - 20/10/23 🛠️ EC 1.2 (stable) pH 5.7 (falling) 🌊 No water neighter nutes added 💼 Sprayed Spinosad 🧠 🚀 ________________________________ 📅 D59/F20 - 21/10/23 🛠️ EC 1.4 (rising) pH 5.4 (falling) --> EC 1.2 pH 5.5 🌊 Added 5L water, nutes Bloom A - B and calmag 💼 🧠 🚀Little Marlene leaves are wilting down ________________________________ 📅 D60/F21 - 22/10/23 🛠️ EC 1.3 (rising) pH 5.3 (falling) --> EC 1.2 pH 5.4 🌊 Added 2L water and nutes: Calmag, Bud Candy, Big Buds 💼 Made a big defolation and sprayed Spinosad. 🧠 I really hope Spinosad will solve the situation here. 🚀 _____________________________ 📅 D61/F22 - 23/10/23 🛠️ EC 1.3 (rising) pH 5.5 (stable) --> EC 1.2 pH 5.5 🌊 Added 4L water and nutes: Calmag, Rhino Skin, Bloom A, B 💼 Little defolation on the big one. 🧠 Never again two girls germinated in a such big time difference (3 weeks) 🚀 _____________________________ 📅 D62/F23 - 24/10/23 🛠️ @17.00 EC 1.3 (rising) pH 5.1 (falling) @23.30 EC 1.4 (rising) pH 5.2 (stable) --> EC 1.2 pH 5.2 🌊 Added 2 L of water, calmag, big bud and B52 💼 Little defolation on the big one. 🧠 🚀 _____________________________ 📅 D63/F24 - 25/10/23 🛠️ EC 1.3 (rising) pH 4.7 (falling) --> (by setup) --> EC 1.2 pH 5.5 . Check in the night EC: 1.13 (stable) pH 6.2 (rising) 🌊 RES Changed 💦💦💦 -> Added calmag, Bloom A-B, Bud Candy, Big Bud and B52 💼 🧠 Quite strange, but good, pH goes up in that way 🚀
Likes
18
Share
@Dunk_Junk
Follow
Wow she's a lovely bush!!! Flowers forming nicely!!
Processing
Likes
18
Share
Die Pflanzen haben sich nach dem umtopfen gut erholt und fangen an gut zu wachsen keine Stress syntome an neuen Blatt Reihen grow hat angefangen gut zu laufen.
Likes
2
Share
Pleasure to grow. Low maintenance in super soil setup in 5 gal cloth pot. Stayed small and compact but frosted up early and heavily. No deficiencies, steady growth, no training needed. Even minimal LST (which I did not do), would surely increase yield but I was more focused on quality and letting it do its thing. Genetically, it was determined to grow a perfect little canopy while not taking up much space, about as low maintenance as you can get on a plant imo. Running autos is still a limited thing for me, I like the idea of having keeper clones of photos as this is all for personal medical use, but this plant was fun to grow, true to form and stable as heck. I have a few seeds left and I’ll definitely save them for an outdoor run down the line
Likes
32
Share
8/10 - Got around 50g per plant, very frosty and compact too for an autoflower. Wanted to share the final product and the whole journey in once. Hope you like it. BTW: why can i only make one harvest when i dont harvest all the same time? And ive seen others be able to harvest week after week. Peace & Love
Processing
Likes
14
Share
@WooderIce
Follow
Im a few days behind on an update, but heres week 10. Things are okay.. Ive had some PH balance issues, which I believe has effectedy nutrient intake.. Its a long story, but lesson now learned, and will help me for the next grow. I also believe, that Ive outgrown these containers, and thats effecting my bud growth. Next grow Im going to 3gal fabric pots. So what did I learn this grow? 1) 1.8 gal containers too small now that my plants are growing better w/ LEDs 2) Calibrate your electronic PH meter, and measure PH including nutrients.
Likes
30
Share
I have been using LST in the form of a fan on medium speed to try and strengthen the main stalk of the plant as well as planter rotation to strengthen the main stalk for tie down LST. So far I've been impressed with the rate of growth and the overall experiment. For what it's worth, the growth wth is very very similar to a hydroponics growth. I'm sure as the experiment continues I'll notice some big differences. It does appear to have either a minor potassium deficiency or a little too much nitrogen. Will monitor and update as needed. The above signs may have been trying to indicate the main stalk was weakening from too much weight from vertical grow rate. This would ultimately lead to a fractured stalk. Is this what happened or is it a fungus or disease problem? Plant C sprouted within 48hrs and will be 6 days behind Plant A. End goal of harvest is still 360g from the two plants combined. Both plants are looking very happy regardless of the toxicity or deficiency. Strong strain nonetheless.
Likes
3
Share
Quarta settimana di fioritura 😉🤔💪🦍