Black Muffin Harvest Report The Black Muffin Monster really impressed me. She grew into a beautiful and strong plant with dense, resinous buds and an amazing aroma. Unfortunately, I suspect she developed a fungal infection, probably Fusarium, which forced me to remove about four side branches. Still, the rest of the plant stayed healthy and finished strong. Overall, I’m very happy with the results and excited to see how she turns out after drying and curing. It was a great experience despite the challenges.

This week I defoliated the Honey Melon Haze and the O.G. Kush. It's the first time I try this. The broken stem of the O.G. Kush seems to grow pretty well so far. Nice! Humidity goes from 50-55% during the day to 80% after the night without dehumidifier (too noisy during the night). I poor 2l of tap water during each watering for the 26l pots and 1l for the 10l pot. The two Mandarin Punch Auto grew a lot this week, the stretch has surely started! They are now even taller then the Honey Melon Haze and the O.G. Kush. Plants heights at the end of the week: Honey Melon Haze : 50cm O.G. Kush : 44cm Mandarin Punch #1 : 54cm Mandarin Punch #2 : 52cm Tomorrow, I will switch to 12h of light to start the stretch of the two photoperiod plants.

All topped for a second time. Light change here in the UK after summer solstice so should kick into flowering in the next few weeks!

So basically what happened is she got tossed into the cloner seen in this video and remained there for about 5 weeks only receiving water for about 2 of those weeks waiting for some late flower monster clones to take root. Then I transitioned both into a light nutrient mix of FF Grow big and Big Bloom. She stayed in this cloner only receiving mild nutrients and a ppfd of around 250 because I underestimated the flowering time of the tent I had been waiting on. She recieved no attention whatsoever other than periodic nutrient changes. If you have noticed I am backlogging a little bit and working towards the present.

Sunday, 27-02-2022 Fungicidal treatment with potassium bicarbonate on 20-02-2022 resulted in significant leaf burn on plants after foliar spray of 8.9 ml/liter potassium bicarbonate with unmeasured amount of Breakthru sticker spreader. I had dusted the plants and pots with insecticidal powder the night before and there seemed to be no ill effects. Rain fell that same night and the leaves were splashed with dirt from the pots so I decided to "rinse" them off with a fungicidal spray of potassium bicarbonate. At the time I was confident this would have no ill effects but now I am wondering if I just didn't remember previous phytotoxic effects caused by this spray. I am also thinking that because I didn't measure the amount of sticker spreader, I may have overdosed the mix and that caused some of the burning by literally breaking through any protective covering on the leaves and possibly penetrating the plant cells. As I sprayed the leaves water soaked spots immediately appeared and within a few hours there was obvious curling and burn, particularly on spots that had small clumps of insecticidal powder. Throughout this past week the visual symptoms of phytotoxicity progressed so much that by the middle of the week I settled my mind that this grow would be terminated this weekend. On Friday night when I came home and saw the plants in the dark I was more hopeful and in the light of day on Saturday morning I was quite pleased with their recovery. Lots of the oldest fan leaves were almost completely brown and yellow with light green veins and some newer leaver have been deformed. Thankfully there is little visual damage to most of the newest growth and after removing the worst of the damaged leaves I am remain hopeful for this grow. Continuing my theme of living in the moment of the grow, I am choosing to think of this incident two ways. First as a "trial by fire" for the plants that only the strongest leaves survived and second as chemical pruning of leaves that I would have removed anyway, just not quite yet. I will be seeking thoughts on the forum as to whether these plants still have hope or if unseen damage has been done that will eventually ruin them. Regardless, I will progress with this grow as long as possible to see for myself what the actual long term effects are. I have also noted what seem to be big hairy balls growing on plant #2 and have asked the forum their opinion. In keeping with my plan to quadline these plants I have clipped the last untopped plant and removed nodes 1 and 2 of all plants. After doing these procedures the plants really just look like heavily defoliated specimens waiting for further training, I am pleased. Despite the phytotoxicity, there was enough growth of the 4 new stems of plants 3-5 that I was able to tie them down. I am waiting for confirmation that #2 is a male to cull it, if not I will tie it down as well. Only fed yesterday because I was watching to see how the plants would do over the week. Wednesday, 02-03-2022 Culled confirmed male plant, thanks @m0use 😃👊! Fed and foliar sprayed with 12 ml/gal CAB and 7.5 ml/gal Cytokin. Used 9ml Ph down in 5 gallon tap water. Ph using ph paper 😞 was approximately 5.0 so I added unph'd 500 ml tapwater to my jug and added the 5.0 water to complete the gallon. Ph was approximately 6.

grow grow grow my darling :) she has grown wonderfully in the last few weeks and she is getting nice and bushy, just as i had planned. i will switch back to the biobizz grow fertiliser. the fish mix attracts too many flies and other insects.

Hello, green warriors and cannabis enthusiasts! 🌱🔥 We’re now in the 4th week of flowering in our epic Runtz Battle, and things are getting intense! This week was a major milestone as we performed a deep, mass defoliation to set the stage for the final push toward harvest. Let’s dive into the details and explore the impact of this crucial step. Week 4 Flowering Progress 🌿🌟 Our Runtz plants are thriving as they enter the second half of the flowering phase. Here’s what’s been happening: • Bud Development 🌸: • The buds are swelling beautifully, with trichome production ramping up across all plants. The flowers are becoming increasingly dense and aromatic, promising a rich and flavorful harvest. The F1 strain continues to stand out with its compact, resin-packed buds that are now truly taking shape. • Environmental Consistency 🌡️: • We’ve kept the environment stable with a room temperature of 30.3°C, water temperature at 18°C, and humidity at 51%. These conditions are ideal for promoting healthy flowering and preventing any issues as the buds continue to bulk up. The Power of Defoliation 🌿✂️ This week, we carried out a deep, mass defoliation—an essential practice for optimizing bud production. Let’s break down what defoliation is and why it’s so important at this stage: • What is Defoliation? 🌱✂️: • Defoliation involves selectively removing a significant amount of fan leaves from the plants. This process is particularly beneficial during the flowering stage as it allows better light penetration and air circulation to the lower bud sites. • Why Defoliation Matters 🌟: • Light Penetration: By removing excess foliage, we’re ensuring that light can reach deeper into the canopy. This light exposure helps to stimulate growth in the lower buds, leading to a more uniform and higher-quality yield across the entire plant. • Air Circulation: Better airflow reduces the risk of mold and mildew, especially as the buds become denser and more susceptible to moisture-related issues. • Energy Focus: Removing large fan leaves redirects the plant’s energy from maintaining foliage to developing the buds. This means the plants can put more effort into producing larger, more resinous flowers. • How the Runtz Plants Responded 🌸: • The Runtz strains handled the defoliation like champions! They’ve already begun responding positively, with the remaining leaves and buds soaking up the extra light and air. We’re expecting to see even more vigorous bud development in the coming weeks as a result of this defoliation. Nutrient and Care Strategy 🌱💧 Our nutrient and care approach continues to support the plants as they push through this critical flowering stage: • Watering and Nutrients 💧: • With the Autopots still running smoothly, we’re maintaining the Regulator and CaMg Boost in the reservoir. The rich soil, bolstered by organic inputs, is providing all the necessary nutrients to sustain healthy growth and flower production. • The defoliation has also allowed us to closely inspect the plants, ensuring they’re free from pests and diseases and making any necessary adjustments to the care routine. • Lighting and Environmental Control 🌡️: • The Lumatek Zeus 465 Compact Pro continues to deliver powerful, even light, now reaching even more of the plants thanks to the defoliation. • The TrolMaster Hydro-X controller is keeping everything dialed in, maintaining the perfect environment for the Runtz strains to thrive. The Zamnesia Gear Shines 🌟📸 We captured some amazing photos this week, showcasing the defoliation process and our beautiful Runtz plants. Shoutout to the incredible gear from Zamnesia that makes this journey even more enjoyable. Their products not only perform exceptionally well but also look fantastic in action! 🌿📸 Looking Ahead 🌟🌿 As we move into the latter stages of flowering, we’re expecting some serious bud development. The defoliation has set the stage for the Runtz strains to focus all their energy on creating dense, resinous flowers. The next few weeks are going to be critical as we fine-tune the environment and prepare for the final push towards harvest. Stay tuned for more updates as we continue this thrilling journey. The finish line is in sight, and the anticipation is building! 🌟💚 #RuntzBattle #Week4Flower #CannabisCommunity #DefoliationDay #BudDevelopment #GreenMagic #ZamnesiaGear #LumatekZeus #TrolMasterHydroX #GrowStrong #StayPositive Germination method 🌱 @thecannakan Genetics Runtz F1 @zam.nesia Runtz auto @kannabiaglobal Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trolmaster #trolmastereurope #trolmastersecrets #Autopots #RuntzBattle #KannabiaVsZamnesia #GreenJoy As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️ link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚

Week 5 and the plants love the balcony. I will be buying some things to protect from wind tunnels on my balcony as the plant gets taller. These plants i have to be quite vigilant with lst because i cant let them get to big. The stems are thick and leaves are nice and lush.

Here we are in week six of flower and not a lot has happen this week other than the usual watering and letting her do her thing. Only trouble this week was updating GoPro had to try a few times. Other than that we got some rain in my home town and collected about 60 gallons that I'm going to use to finish the rest of the grow. Also, got my new AC Infinity CLOUDLINE T4, Quiet Inline Duct Fan System with Temperature and Humidity Controller, 4-Inch. I was really hoping this two plants would finish before the year ended, however, it looks like they got others plans. See you guys next week.

its been a hot dry week but the girls have fared it well. mound design and soil content have helped keep moisture in the root ball of the plants. Hopefully we get some rain this week otherwise im going to be spending a day just watering them. fingers crossed for rain. We need a rain dance here.

An Tag 42 habe ich alle Haupzweige runtergebogen um mehr Struktur zu schaffen 💪 Tag 46 letzte Entlaubung vor der Blüte 😜 Tag 47: die Triple G hat sich besstens vom ausgeizen erholt! Die übrigen Triebe sind schon deutlich kräftig geworden. In 2 Tagen schick ich sie in die Blüte 😎

Today is a great day here with the papaya bomb cotten candy! I have done a lot of work with this plant and she is lovingggggg it! let me tell you! with everytt branch topped and healed we are looking at a total of 34 coals in the 2x2 to fill her up! I might try to take some clones as she is a simi fast term. And I will be having to make the flip to a 12/12 It wwould be bad asss if I can get some clones from her!!! But I am just excited to get some phat ole dank coals from her!!! She wants to produce them haha letsssss goooo any thoughts idewas comments questions im always here :) MUCH LOVE HAPPY GROWING

Midnight is a seriously beautiful cultivar and unlike many other purple strains I’ve seen, grown and smoked, this one’s terps are actually rather impressive. Her aroma is a pungent mix of berries, citrus and gas. I love it. She certainly isn’t the fastest auto. We’re at day 77 since sprout and it’s clear she still needs another 2-2.5 weeks. I expect her to be ready for harvest somewhere in the 90-95 day range.

One is really budding faster than the rest but all the girls are doing well. Next to no training on these girls due to limited space but they all are filling in nicely. Very happy with the west coast ✌️🏻💚

Chopped at day 60. Musky and pungent dank.