Beginning of week.. Wow.. Just... Wow lol.. That's all I can say. Amazing scent.. Gorgeous colors.. Very happy and healthy girl. Besides very minor spotting on some lower leaves.. Which I am assuming was from Calcium def.. She is looking great! I'm not sure what this is all about, but damnnear all my plants have this clawing on leaves that are not exposed to the light.. Looks like wind burn.. Looks like nitrogen toxicity.. But I know for a fact that its neither.. Fans are not even really blowing on the plant itself.. And other leaves would also be clawing if it were nitrogen toxicity.. I'm assuming it's just from not enough light exposure.. But not an issue.. She is happy and loving life! At this point I am stopping silica.. Just too many conflicting articles about it not doing any good in flower.. And even causing the smoke to be harsh and the bud hard to break up.. Which does make alot of sense.. I only like to use silica in veg anyways.. And for the stretch.. It just makes more sense to me.. Mid week.. Adjustments need to be made.. The very top of each cola is getting a little bit of clawing.. I'm thinking it may be time to cut back on some Micro.. Maybe even the Floralicious Plus, since they both have so much Nitrogen in them.. She's getting plenty of CalMag, and the other trace elements in the Micro shouldn't be that much of an issue.. Still gonna use the Micro.. Just cut it down from 1mL/L to .5mL/L. Maybe the clawing is just how these plants tend to grow?? I'm not sure.. I see alot of the clawing on her small side branches.. Always have on other grows too.. But maybe I've always been giving them too much Nitrogen in bloom.. Just seems more like a 'not getting light' kinda thing.. But now that it's on the top of the colas.. I'm thinking its a Nitrogen thing.. Anyways.. Such a gorgeous plant! Gorgeous colors.. Amazing smell.. Just... WOW! Lol Next day.. Ok I'm thinking the clawing is getting a little worse.. That's after I fed her using .75mL/L of Micro and about 10 drops of Floralicious Plus.. Both containing a bit of nitrogen.. I'm going to have to completely cut out the Floralicious Plus and just .5mL/L of the Micro.. I hope that doesn't cause any different issues.. It shouldn't.. And I'm going to bump up the Kushie Kush bloom booster a little.. Still not full strength but getting closer.. I hope this doesn't affect my final yeild and/or taste! I will literally cry if the taste is fucked up at all... 😢 lol.. Nah.. As strong as it is now.. I think that would be impossible! I got my new tent in yesterday.. Haven't set it up yet tho.. Gotta get everything ready to switch over soon.. It's still a 2×2.. But instead of 48" tall it's 55" tall.. Which would be a little better for taller plants (not by much.. But still better lol).. Anyways.. No more Floralicious Plus and only about half of the Micro doses (lol) that I intended to use in the first place.. She really doesn't like Nitrogen in flower.. Which is understandable.. But I've never had a plant this sensitive to it before.. Good learning experience for sure! End of week.. So I bought a Brita filter because my tap water is pretty shitty.. 240 PPM - 260 PPM.. I've only ran about a gallon through it and its barely bring it down to 190 PPM - 200 PPM.. I mean.. I also didnt use the actual Brita filter yet.. Just the Wal-Mart brand.. It sucks obviously.. When I run the actual Brita filter in my drinking pitcher.. It can bring the tap water down to about 160 PPM!!! Compared to the Wal-Mart filter.. That is fucking incredible! I'm thinking when I run a couple more gallons thru, it will hopefully bring it down a bit more.. I don't need it to be 0 PPM.. just not 260 PPM.. That's fucking insane! Our water sucks out here.. The plants dont seem to mind very much, but after using the filtered water, instead of the nutrient water being 1150 PPM its barely 980 PPM - 1000 PPM.. NOTot a huge change.. But I think it will help. For harvest, I'll use the FloraKleen once along with distilled water.. Still got a few weeks before thinking about that.. But I always flush with my tap water and can't ever get the PPM below 400 PPM or so... Now about the plant lol... Yeah, it's gotta be nitrogen toxicity with the clawing leaves.. Again, I've went down on the Micro since it has so much nitrogen.. And also cut out the Floralicious Plus.. Sometimes I'll add a couple drops.. But it really makes me nervous lol.. I DO NOT want to hurt the yeild or taste of this girlie! But she is doing good.. Just as a test, I added a little bit of some feminized pollen to a very small nug on the bottom.. Its photoperiod pollen.. But this should create a "fast version" according to Sweet Seeds.. But she is doing good.. Smelling amazing.. Gorgeous colors!!.. Anyways... On to the next week!!!...

A lot more happening this week! As shown in the pics, and as suspected, I have a manganese deficiency. I've been keeping my pH level at 6.2 in coco, manganese is taken up best by the plant below 6.0 pH. Dropping my ph level to 5.8 pH, and flushing with lower pH, hopefully it will solve the issue over the course of a few days. I made a new frame for a SCROG, with a "custom bend" in the CPVC pipe on both ends. The bend will allow me to take advantage of the slack material in the sides of my 4x4 tent. I'd previously taken 4" out of all the upright poles to shorten the tent so it would fit in the room due to low ceilings, meaning I had extra slack in my tent walls. The bend in the net frame pushes the sides of the tent out to 5 foot wide. My first SCROG net was a 6" mesh from Amazon, immediately knew I wanted a smaller mesh. Next time around I built my own with a 4" mesh and used the 4" for several grows. This time I decided to go with an even smaller, 3" mesh, and already I like it better. I don't really see myself going much smaller than 3" mesh though. It seems to work well, and any smaller and it may be too tight trying to work the plant through the opening sometimes, which if not careful, will damage the plant. I usually use a & gal cloth pot, grow off rules stated we 0had to use a 5 gal pot. Seeing as I only had 7 gal on hand, I was stuck picking up a Root Farm 5 gal cloth pot locally, as you can see, the roots didn't really stay contained, nor did they "air prune", i had to tear them off before installing the net above. On the last day of week 6 I finally got my net installed, and the plant SCROGged. I should have put the net in place a week or two earlier, it would have been easier to manipulate the plant, however the plant will still have a week to recover. I tie the net in place above the plant, and slowly lower it down, as I bend and super crop the main stalk over parallel to the net, and work all the branches underneath and spread them out. As the plant grows I'll continue to push branches back down through the net and moving them out to the next hole. This will greatly increase yields by allowing light to more bud sites, keeping all buds the same height and thus the same distance from the light. small budsites on a vertical branch, will transform into their own cola once the branch is laid on its side. Instead of a Christmas tree type of plant, with one large main cola, and smaller and smaller buds as you move further down the plant, you end up with a bunch of colas that are all close to the same size, and more importantly, the same level of maturity. The SCROG method, combined with super cropping, and defoliation has greatly increased my yields. As the plant is getting worked into the net, I'll defoliate where necessary, ie a huge fan leaf covering bud sites, however for the next several weeks I'll be defoliating so mush every night or two, systematically trimming off all fan leaves, and stripping everything below the net, and any small bud sites that wont produce well. Usually by the time I'm half way through the flower stage there are no big fan leaves left to be found. It helps with light penetration, which results in a higher quality, higher quantity yield, as well as airflow, which will help prevent White Powdery Mildew and other molds etc. Once a fan leaf is 14 days old, its ability to photosynthesize light, starts to degrade. Once it reaches a certain point, the leaf drains more energy from the plant, than it's giving the plant. My best yields have been from heavily defoliated plants, my last grow I couldn't physically defoliate quite as heavily as usual, and I ended up about 25-30% less bud than expected

04.04 • 48hrs Água - 1ml de água oxigenada V10 - Água mineral ph 6.79 - Escuro, 21ºC ~ 23ºc 06.04 • 72hrs papel toalha - Pote de vidro - Escuro, 21ºc ~ 23ºc 08.04 • Radicula visível 09.04 • Vaso 5L - Substrato Terrô Start 3L • 10.04 - Germinação

Le he hecho una apical en el tercer nudo, le he hecho una defoliación y a una de las ramas le he hecho supercropping

It's been a beautiful plant to grow, I thought she was gonna be a little bigger, however she has produced an amazing quality flowers, very sticky, terpy and stinky, the citric aroma it's absolutely wonderful just because of that I could grow her again and again. You definitely need to try this strain if you lovd weed.💚🌱🤤

Day 89 - pH thing has been quite steady the last few days, but I think part of the reason is I have been keeping it over 6 (between 6.1 & 6.3) which makes me think it may not be able to feed on something so keeps pH stable (This pH issue could be root acidification with too much Potassium; it seems to coincide with the PK Warrior being added - pH needs to be below 6 for Potassium uptake to happen so I artificially blocked it by keeping pH above 6!!!). EC also going up but not as quick as it was...drops back further than it was when adding RO water (i.e. if it drank 10L and EC went from 1.7 to 1.9, adding 10L back takes it to 1.6). So, as I have been promising myself for the last couple of days, I did a full tank change. Have dropped the feed substantially for the start of week 7 (Which is technically Monday coming). New Nute Strength: Silicon - 1ml/L Sumo Boost - 2ml/L Bloom A - 1.2ml/L Bloom B - 1.2ml/L PK Warrior - 0.4ml/L Sensizym - 2ml/L Fulvic - 2ml/L EC 0.8, pH 5.9 Did have A & B @ 1ml/L but EC was barely 0.7 (Background EC of water is 0.2) so added the touch more A&B so as not to super starve them. Will now monitor pH/EC for the next few days and try to keep levels nice and even for the next 9-10 days before going to week 8 force and week 9 flush and the finishing bulb! ************************************************* Day 85 - Dayum this pH management getting funky now!!! For the last week, pH keeps taking a nose dive (0.5-0.7 a day) with water level dropping and EC rising. Can't work out what the girls are at at all. Apart from lower leaf loss due to light being blocked, the plant is creating some new leaf matter (As you would expect) where light is getting reflected down low but can't work out the pH drops. No matter what EC i set them too, or pH, they only appear to be taking on water...or something micro (Ca/MG or the likes) and leaving the macro's. Topped up tank with some RO (Reclaimed from dehumidifier) water and only added calmag since tank change 3 nights back (It has some N in it for the new green and hopefully just gives what it needs with Ca/Mg). Apart from that, just keeping an eye on things to make sure no burn...dont want to put them on a starve on the beginning of Flower week 6!!!

⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️ ⏭️ WEEK 7 - BLOOM ⏮️ ⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️ ⏭️ Sept.19 - Sept. 25 ⏮️ ⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️⏹️ Fo' Twenny here! 🙋‍♀️ Back with another update on our Orange Sherbert cultivar from breeder Barney's Farm! It's week 7 and all is looking great! Her deficiency/toxicity issues have come to a halt and she is realky bulking up nicely. I think these are going to be some really nice dense compact nugs. She is frosty and smells fantastic like orange cream candy 🍊🍦🍭!!! Very sweet smell!!! I am looking forward to smoking some of this flower!!! Now on to the details! ________________________________ 9/20 - Day 44: 🚿FEED DAY!🚿 She received approximately 3.25 gallons of nutrient solution. Of 10 gallons mixed, 36 oz is divided by 3 autoflowers and the remainder of the solution was shared by 3 plants. 👩‍🔬NUTRIENT SOLUTION👩‍🔬 ⬇️Mixing Rundown⬇️ 12 oz tap H2O run through x2 KDF filters Start ppm 630 Start ph 7.8 .5 tsp/gal Fox Farm Gringo Rasta Cal-Mag 1.5 tsp/gal Fox Farm's BIG Bloom 1 tsp/gal Fox Farm's Grow Big 1 tsp/gal Fox Farm's Tiger Bloom .5 tsp/gal Fox Farm's Kelp Me Kelp You 1.5 tsp/gal Fox Farm's BEMBÉ .125 tsp/gal Fox Farm's Cha-Ching pH: 5.8 I always make sure pH is in the range of 6.0- 6.6 prior to adding any microbial innocclants. pH already in range, no adjustments needed. Add 5 tsp of pH up pH: 6.1 1 tsp/gal Grower's Choice Recharge .6 ml/gal Mammoth P. pH: 6.3 PPM: 1430 ________________________________ 9/23 - Day 47: Photoshoot and filming! 📸🎥 Some light selective defoliation. 🌿 ________________________________ 9/25 Day 49: I have been regularly checking the moisture 💦 level in my medium and she still isn't quite ready for her next watering. Based off where it's at now, I will plan to water tomorrow. _________________________________ Want to see all the strains I have running? Please check out my other diaries & give me a follow! Happy growing my friends! ☺️🌱 Thank you for stopping by my garden! Peace, ☮️✌️ Love, 💚🤟 & Frosty Nugs! ❄️🌲 - Fo' Twenny

They are root bound, I've repotted them into 2 litre pots too allow root growth. I've also defoliated. Ill give them around a week then repot and switch to flower.

everything looks stable :) the mistake was made when choosing this pot, it is too small for her :( there is no room for the roots so it grows quite slowly, but everything is fine - I learn from my mistakes :) this week I did a lot of pruning of leaves and branches, which the girl responded well to , without much stress, I'm going on vacation soon - I'll leave the girl alone for a week - of course someone will come to water her :) so before I leave I'll give her at least 1000ppm water, and the next 2 waterings will only be pure water 25ppm :) I hope everything will be fine :) good luck everyone :).

Semana 13: 31dez - 6janeiro Quase perto do fim!

Topped, start mainlining week 3 day 16 , going well .

This week I'm going to talk a little bit about the 2 gal pots I leave outdoors. Since they're going to be indoors now, I've assembled a fertilizer rack and the bottom compartment is perfect for a cage with all the plants I have. With a length of 1.5m, width 65cm and height of 1m, I will use 4 led bulbs 50w and 2 full spectrum LEDs 36w long 1.2m. 272w / ~ 1m2. 2/3:Plant the plants indoors and lst them. 4 led bulb 50w 5/3:Run off all the trees, as it was soaked with rain water when left outside. is still the old nutritional dose. 6/3: Today I received the led light I ordered. I perfect my design and let the tree in the cage out and lst. 9/3:I feel everything is perfect today, I reduce their lighting time to 12/12. I will cut off all the fan leaves from the stem of the 2gal pots and prune all the small branches of the 1gal pot. in this pruning I will trim them as much as possible. It's been 37 days since the seed and I think they're ready for flowering. I need to flower them urgently because in the next 2 months the weather can be as hot as 40 degrees, and I really have no way to reduce their temperature. I would probably have them flower for 7 to 8 weeks to retain maximum resin. a few days before high, I fliming an NL plant, I experimented with this technique and I feel that they have been very successful since the fliming plants have a much larger stump than other plants. I really like this technique, as it will save me the small space I currently have without having toppings. With just a few simple steps I have got a really big stump and still keep the biggest main bud of the tree. I hope each plant can give me 20-25 grams of dried marijuana.

J’ai d’abord pris ma bouture sur un pied en floraison, elle a passé 2 semaines dans ma bouturette maison, puis après l’apparition des racines, j’ai saupoudré du great white myco sur les racines puis mis la bouture en lightmix. Malheureusement je subis une belle attaque de thrips, j’attends donc la livraison de prédateurs : les chrysopes, j’ai hâte de les voir me sauver en se régalant !!

Plant is 6 weeks from seed tomorrow, I have upped nutes to 3ml per litre of both A +B Canna coco nutrients for a couple of waterings but she's soon started showing nute burn again so i've lowered to 2.75ml . Stretch has slowed right down and I'm hoping will stop very soon

Start week