The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
La 3 semana de crecimiento las niñas están en su máxima potencia comprobamos que no tienen falta fe ningún nutriente están super verdes con unas hojas muy grandes
Likes
2
Share
@DD_420
Follow
Final stretch, expecting to have this little beauty hanging next week
Likes
7
Share
@refusing3
Follow
Day 15 of flowering: reduced the Grow component to 2 ml/L to reduce N at the same time increased the ml of Micro, bloom components to 4 ml/L according to the Advanced Nutrients table Day 20 of flowering: I turned on the air conditioner to keep the temperature level at 23 C Watering volume week 8: Day 15 -21 - 500 ml per day
Likes
17
Share
Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Violet Face: Esta variedad feminizada es como un dream team de la realeza del cannabis, que mezcla la majestuosa Blue Face con las frías vibraciones de la Frozen Black Cherry. Es como el perfecto día de verano: vibraciones soleadas con una brisa fresca. Blue Face aporta esa refinada magia Z, con notas cremosas de naranja y pastel de plátano que te harán sentir como si estuvieras en un paraíso tropical. A continuación, Frozen Black Cherry entra en escena con su aspecto escarchado y su aroma a cereza dulce y ácida que es sencillamente adictivo. Sube el volumen porque Violet Face golpea fuerte con niveles de THC que se disparan hasta el 35%. Cada calada es un billete al paraíso, que combina los lujosos aromas de la cereza con una embriagadora mezcla de dulzura y sabor afrutado. Violet Face no es sólo un estilo de vida relajado; también es una campeona de peso pesado, con rendimientos de 600 g/m² en interior y unos exuberantes 900 - 1200 g por planta en exterior. Esta belleza florece en 8-9 semanas, y está lista para la cosecha a finales de septiembre. Tanto si la mantienes acogedora en interior como si la extiendes bajo el cielo, Violet Face se extiende con alturas de 80-120 cm en interior y 160-200 cm en exterior. 🌻🚀 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 2: Gran primera semana, ella ha dado un gran estiron estos días, si sigue así será una gran cosecha. Esta semana se practica defoliacion, poda de ramas bajas y se le agrega Sticky Fingers. La carpa está ocupada al 100%, sigue una floracion explosiva gracias a @Marshydro y @Xpertnutrients y @Trolmaster con esta gran genética 💪. Potencia de la lámpara: 70%
Likes
109
Share
-Sorry I missed a week as I left town for vacation, luckily I had someone to check on them -I've been feeding once a week about 2 gallons each -I water whenever the top couple inches is dry but its been raining almost every other day so I've barely watered them -I've been using straight tap water (municipal) without dechlorinating. I was dechlorinating for 3/4 and using the 4th as a test, it showed no ill effects so I decided to not waste my time and just send it. I'ts been 2 weeks and no negative signs (touch wood) so I'll continue -I used Promix-HP as my medium, its pretty light and the girls are getting pretty tall. When I got home from my vacation I noticed they were all leaning to one side. I assumed they were leaning towards where they get the most sun so I spun them around. Doing so I noticed that they were leaning because they were top heavy and the medium wasn't dense enough to provide sufficient support. I set up the perimeter wire as you see to provide additional support and tied the stalks up with stakes. They seem pretty sturdy now. -Been getting some hot and humid days here in Ontario and they keep stretching, I'm curious as to how big they'll get before flower. -Oh and the Auto White Widow from my previous grow was planted in my flower bed and its still just vegging, hopefully it'll flower with the rest. I'm about to give her another major haircut.
Likes
2
Share
Girls are doing well....seed looking like she earning her name..have some cutting off her n am please with the first week of flower....one got super stress n she dont even look like it jus watchin to see how things look later
Processing
Likes
10
Share
@weedbuddy
Follow
Ive been vegging her for 5 weeks. And she has now been flowering for 4 weeks. and approximately 3-4 weeks left until harvest
Likes
4
Share
Likes
8
Share
First colors are showing up as we are going into week 7. Plant is looking great so far!
Likes
48
Share
SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.
Likes
16
Share
@Vps420
Follow
In the middle of the 5 week most of them show their sativa characters with long branches, now in the 6 week they are completely start flowering, more photos soon Today 14/05/2021 I will change the lamp bulb to a specific one for flowering (always 400w) and will experience the CalMag for the first time in 4 years, all I have learned was self taught and I have never used this product...in my opinion it was a big mistake, hope to have a positive result 🌋🏔️🌋🏔️💚💚💚💚
Likes
19
Share
@valiotoro
Follow
Hello everyone 😎 Week 2 for my girl She is doing very well,growing at fast pace and with a beautiful green colour on the leaves. Have a nice day 😎
Likes
2
Share
Rainbow melon, a marvelous genetic I’ve never seen such a rigorous plant. I’ve never to plant before so we’ll see how it goes like that but if there’s a chance, I can have fat cola all the way around I’m going to do it has some trouble with her on my first one so a little scared, but we’ll see how she handles it. 🔥🙏
Likes
8
Share
This week went ok . I noticed there are Rust spots on the leaves that was due to I didn't have my carbon filter at the time but I do now and the plants have been treated today with the spray .but other then that thay ar doing well . Thank you for looking at my diary and always remember it's 420 somewhere 🌱👍
Likes
5
Share
Growing's been good this week she transitioned to the outside very nicely very easily with little to no stress! She been super easy to this point
Likes
3
Share
@SgtDoofy
Follow
Jun 10: Getting droopy. Watered less than half gallon of Ph 6.7 water. Jun 12: That watering really gave a growth spurt! Gonna bump the humidity up to a max of 81% til we get further into veg. Jun 13: Plant is tall enough to tie some good looking limbs down and also the main stem to the side. Jun 15: Buckets are getting lighter, but the soil is moist, meaning my humidity was too high. That lead to some mold and algae that I will treat with spray Neem oil. Smells terrible, but should do the trick. Lowering humidity to 65% for a bit, then will probably get closer to 75% over the next few days.
Likes
6
Share
Week 3 flower and they are already stacking nicely! Buds have a nice purple / blue hue to them already which is awesome!