Overall great genetics super fast

Día 27 (20/05) Riego con 250 ml de Té de Compost Auto Northern Dragon Fuel está creciendo exponencialmente! Día 28 (21/05) Vuelven a tener sed! Las riego con 250 ml sólo H20 pH 6.2 Auto Northern Dragon Fuel se ha recuperado muy bien de la deficiencia de Mg Día 29 (22/05) Riego con 750 ml H2O+ Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + Startbooster 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 Auto Northern Dragon Fuel vuelve a recibir aplicación foliar de sales de Epson (4 g/L) porque presenta de nuevo ligera clorosis Día 30 (23/05) N/A Día 31 (24/05) N/A Día 32 (25/05) Las plantas no paran de crecer! 😍 Día 33 (26/05) Riego con 750 ml H2O + Regulator 0,15 ml/l + CaMg-Boost 0,25 ml/l + TopBooster 0,2 ml/l- pH 6.2 💦Nutrients by Aptus Holland - www.aptus-holland.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae

Added a few 6ft bamboo poles for support. She’s going to be a thick girl ❤️ She already smells pretty loud! Can’t quite describe it yet other than mouth watering.

Felt like I wasted the last coco spot with this girl. Definitely should have done a different strain but still looking forward to the finished product. Had problems end of flower but it managed to power through 💚🌱 Will make most of this into bubble hash

This plant is really healthy and is starting to come around. It has good stacking but is a short plant

half way through the first week of flower and the stretch is in full effect. canopy is going to be completely full in a few days, scared for my dwarf white runtz in the middle of the group, itll get swallowed

There’s no doubt that she’s in flower on day 31, mid week 4 from seed. I’m going to cut the nitrogen supplementation back to half and start introducing More Phosphorus and Potassium….This is a mid week update I’ll be adding more to This week

Very good

Leaf scaring getting worse but seems to have stopped progressing. Buds look amazing and can't complain about tricome production.

First time taking clones. Took 6 and 6/6 rooted. Put 5 in the grow tent and eventually took one out to make space for the dehumidifier.

Week 10 Update – Sticky Broccoli Auto Late Flower / Staggered Harvest Begins This week marked the start of harvest. One plant had to come down early due to size and structural issues, but overall quality is still looking strong. The remaining plants are being staggered for harvest to dial in peak ripeness. ⸻ Drying / Post-Harvest Note • One harvested plant nearly filled the Cannatrol Cool Cure C • Space is now a real concern for the remaining harvest • May need to stagger loads or get creative with drying strategy ⸻ Lighting & Canopy Management • Installed under-canopy lighting (3/25) • ~24W per light • Producing 200–300 PPFD under canopy • Helps push lower bud development late into flower • Likely contributed to improved lower-site density ⸻ Feeding Strategy Shift • Fully transitioned to hand feeding • Removed emitters to prevent overwatering and improve control • Beginning staggered flush approach: • 2 plants switched to plain RO water • Final plant continues light feeding before final flush ⸻ Feeding Log 3/26 – Standard Feed • 4 gallons mixed, ~2.5 gallons used • ~5% runoff per plant • 5.8 pH Per gallon: • 0.5ml Silicium Bloom • 2ml MagCal • 4ml Green Sensation • 2ml Cocos A • 8ml Cocos B • 4ml Pure Zym ⸻ 3/27 – Accidental Heavy Feed (Adjusted) • Mixed wrong schedule, used ~50% • 900 ppm / 5.8 pH Per gallon: • 0.5ml Silicium Bloom • 2ml MagCal • 4ml Green Sensation • 3ml Cocos A • 12ml Cocos B • 4ml Pure Zym ⸻ 3/28 – No Feed ⸻ 3/30 – Light Feed / Transition Phase • Fed at lights on (~2:30 AM) • ~5% runoff • 430 ppm / 6.0 pH Per gallon: • 0.5ml Silicium Bloom • 2ml MagCal • 4ml Green Sensation • 2ml Cocos A • 8ml Cocos B • 4ml Pure Zym ⸻ Trichome & Ripeness Check • Majority: cloudy dominant • Some amber beginning to show • Small percentage still clear • Right in the harvest window depending on desired effect ⸻ Observations • Bud weight is seriously stacking – causing structural issues • Under-canopy lighting seems to be helping lower development • Plants are finishing strong with good resin coverage • Staggered harvest should help maximize overall quality ⸻ Next Steps • Chop 2 plants this weekend • Let final plant push another week for increased amber • Monitor Cannatrol capacity and drying timing • Continue RO water on finishing plants

We just build +1 Room, about 9Sq meter with 2000w HPS. We decide, cos we see a lot more of potence by this genetic i have to tell now, ~less is more~ ..if i talk about ammount pro sqM... As well we gonna change all small 6L pots for 11L. Where i see our reserve is, that we need to cut much more, of lower level‘s „bat‘s“ in VEG.. ⚠️ actually i know: „dont touch girl in bloom“ , but it was necesary last week.. really necessry to cut all that shit stuff on „bottom“ ... 330 girls on 16m2 in 6L & 11L pots

Fast Recovery from topping. Canna Nutrients and ph- for feeding. Little LST in the upcoming days. All plants are developing well. RH 60 Temp 24 celsius EVO 6 at 40% VPD ~ 1.1 The new AC Infinity Setup is really good and intuitive so far. 12/12 and little defoliation next week

Going towards some Dark cloudy and rainy days, but all of the 3 girls are looking veryy good beautiful! And Can really Tell now Why the breeder is called sweet seeds, because they’re really stsrting to smell soo sweet, berry kinda, especially seed 1( the darkest of Them all) but so far so good, only feeding Bloom nutes now, so i Think they’re hopefully Ready to put on some Weight 🙏🏽🙏🏽💪🏽

Ahojte všetci tak sme sa dočkali a máme tu krásne jarné počasie, ktoré už čoskoro bude veľmi ovplyvňovať môj kútok šťastia a vlhkosť bude nepriateľ číslo jedna.Začalo pršať vlhkosť ide hore 56% deň.Končím už 4 týždeň Flower a dal som už ten odvlhčovač skôr aby cez noc nebola vlhkosť nad 60%. Na začiatku 4. týždňa flower À la carte hnojív sa zatiaľ nemení, držím sa rovnakého tempa a čakám kedy začne obľúbený proces hrnček var a kitkám bude chutiť viac. Cal-mag Xtra je dosť silný a veľmi rýchlo vie dvíhať EC preto sa ho snažím dávať len každú druhú zálievku, pokiaľ nevidím nedostatky.Keby je taká možnosť chcel by som vidieť ten proces čo sa deje v koreňovej zóne vnútri v pote. Niečo ako tá rozprávka bol raz jeden život. 👉👉👉👉👉Bol raz jeden kutil ktorý sa v problémoch stravovacích pre kitky topil 😀. Ec čistej vody 0.5 tu sa začali moje problémy v kvete. Poďme pekne od začiatku. Celú vegetáciu som nepoužíval xmag calmag a všetko fungovalo hnojil som každú zálievku všetko podľa plánu. Výrobca udáva xmag Hnojit iba 1x týždenne ale ak som tam dával Magnézium 1ml začalo mi to strašne dvíhať EC 2 a potom som začal dávať 👉 vodu 👉hnojka fungovalo to do určitej chvíle keď tie kitky začali vykazovať hlad od hnojív. Ťažke tvrdá voda a calmag spôsobuje v mojom prípade,že sa mi tam usádzajú mineráli Ec prudko stúpa☝️.Do tejto ruskej rulety som pridal enzimy canazym nech sa to tam trocha čo tam nemá byť rozloží. Samozrejme ten cal-mag hodím ale bude ho len mierne lebo nechcem sa potopiť ako Titanic. Preto aj predchádzajúce grow,keď som nemal EC meter a stále som tam dával Hnojky pálilo kitky lebo problém bol hlavne vo vode a keď som tam všetko namiešal tak to EC bolo vysoko a potom aj výsledky boli aké boli. Ťažke tento trn s päty som dal preč a kitka hneď po vstupe ďalšia zalievka ukázala s hnojkami hneď iné hodnoty a to som hnojku dal 2x za sebou. Teraz čakám ako sa to bude ďalej už správať a verím, že toto bol hlavný problém, ktorý ma brzdil a môžem dávať Hnojky už stále a nebáť sa, že to budem kaziť. Držte palce zdravý Kutil.

Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23.5c Turn off if temp goes above 23.5c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 58% with 2% steps Max speed 8 Min speed 3 VPD aim 0.7-1.1 Wednesday 22/2/23 Day 29 7.30pm #1 Dli=20.8 Thursday 23/2/23 Day 30 10.00am Feed for 3hrs 5L used. 1.6L each Need to try a different pump. Friday 24/2/23 Day 31 8.00pm Everything looks fine. 10.00pm Extractor settings temperature 24c with 1c steps Humidity 55% with 2% steps Max speed 9 Min speed 3 Saturday 25/2/23 Day 32 7.00pm #1 Height= 22CM Dist= 46CM DLI= 22 Sunday 26/2/23 Day 33 1.15am Feed for 1hrs different pump. Different pump is better. 10L Ec=1.59 Ph=6.3/6.3 2L left 2.6L each roughly. #1 no run off 4.00pm Radiator settings LIghts on Turn on if temp drops below 23.0c Turn off if temp goes above 23.0c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Monday 27/2/23 Day 34 7.30pm #1 defoliate some lower stuff. Tuesday 28/2/23 Day 35 #1 Height= 25CM Dist= 43CM DLI= 22.5 The 1st week of flower has flown by. I'm quite happy with how things have gone with the grow so far. The environmental system seems to be keeping conditions a lot closer then I could manage using guess work and timers, probably the best investment I have made for growing. #1 Wedding cheesecake FF hasn't started stretching yet and has turned into a proper bush, I have had to remove a load of leaves throughout the week, a few every couple of days and then I removed a load of the lower nodes that aren't going to make it past the screen. She hasn't started showing pistils yet. Power used for week Light (1.85+1.79+1.79+1.78+1.75+1.75+1.75)=12.46Kw Extractor (0.16+0.12+0.14+0.15+0.14+0.17+0.18)=1.06Kw Fans (0.39+0.39+0.41+0.4+0.39+0.39+0.40)=2.77Kw Dehumidifier (1.26+0.62+0.73+0.04+0.11+0.55+1.61)=4.92Kw Radiator (1.59+2.70+2.28+3.6+2.86+3.15+3.23)=19.41Kw Water pump. (0.0+0.01+0.0+0.0+0.01+0.0+0.0)=0.02Kw Total for the week=40.64Kw Back in a week. Thanks for stopping by.

Drying at 60%rlf and 18-20C in DryFerm bags.

420 Fastbuds FBT2306 Week 6 This week has been exciting for sure. Both have definitely transitioned into flower now, showing flower sites everywhere.Had some calmag issues but I think we got that under control by upping the feeding to 1tsp per gal. Over all I'd say Happy Growing.

D56 - Plants were looking good | 6L of Water DLI | 43 But while watering saw that the left plant was a herm.... Saw a couple pollen sacks and plucked them but overall decided not worth it and culled it. Shame... Flipped on day 38 would push out to 49 next time Did some LST and supercropping on the survivor to fill up the tent. D57 - Did an autopsy on the herm'd out plant.. Taking a look at the main root ball she was root bound. When i did the transplant, right afterwards... I remembered I should've roughed up the roots (out of the cup form). The video shows what I mean. The roots were growing well but were all twisted and crossweaved. Found a handful of pollen sacks today on the survivor, the outlook is ominous, this one likely has the same root issue going on. Will check over the next few days but not holding out much hope, once the herm trait is activated, there's no reversing it...