The Grow Awards 2025 🏆
Recommended
Processing
Likes
Comments
Share
@Race91
Follow
Just keeping the LST and high frequency fertigation going like they talk about on cocoforcannabis.com. If you grow with coco you should check it out because there is much to learn even when you know some shit...for real tho. I have some cool mutations on one of my plants. One middle branch has 4 leafs coming out of 1 node which has 4 “blooms” coming out of where the leafs are sprouting. Also I have a branch that looks topped but it wasn’t so it’s a perfect Y with nodes at the branch and on top and another Y on the same plant on a main where it’s really thick but has two stems sprouting out of one which is right at the top of that branch. Anyway shits going really good with these bubblegum autos. I’m freaking impressed that you get 5 weeks of Veg out of them and that’s on all 3 plants. I thought I was seeing a stretch last week start and I was right for sure. Iv gained at least 3” in 7 days and my bigger ones probably more then 3 but I like to average. My shorty plant AKA Shorty WOP WOP 😂 is very different in structure from the other two which are themselves different but more similar. It’s actually a small,large, larger pheno situation which never happens for me. Idk the odds or total number of possible phenotypes but I got 1 of each of the good ones. Safe to say I’m happy and the pictures show why. Thanks for checking peeps.
Likes
13
Share
@Andres
Follow
She is growing strong and healthu but its to heavy. She is tied with a cable to the wall. She is not perfect in her leaves because she is growing outdoor and finally it is in the last stage. she grew very slow in winter with cloudy days. But now showing its potential with organic products. It is a few weeks to be cut.
Processing
Likes
18
Share
Heavy defoliation the day before the photos were taken. Will leave alone now to stack and mature for a month. Feed regularly. *(If anyone has seen the little blue heater that I use in the room in one of the photos or videos, I noticed a tiny LED on the side. Since it was daylight when I tested the heater and it's so small, hadn't noticed that it turns on when the heater is activated. It is red and I think that it's intermittent off/on/off during flowering was having an effect on the plants on the right side where the light is. Put duct tape over the light and hopefully, that's that, although if the element inside glows red and lights up the room, I may have to deal with it).
Processing
Likes
3
Share
@Chemist
Follow
I am going to start my new week 24-11-2019 because the soil is telling that it needs water and it's technically the beginning if the new week so why not. If you look at the still Pic the leaves look like a deficiency or maybe light burn I did not notice that earlier today. I have si ce raised the light and I will check tomorrow to see if the color of the leaves have turned green all through the veins where there is some signs of yellowing. If I see change the maybe both concerns have been addressed because I also increased the ppm's in feeding.
Processing
Likes
Comments
Share
@Spazmagi
Follow
Likes
12
Share
@Piablo
Follow
Day 7-9: Had a good environment overall, although the light was probably much too high. I didn't realise until quite late that it should have been 60cm above the seedling, and I had it around 120cm at first, and then 80cm. As a result the stem is a bit stringy. Day 9: I lowered the light to 60cm above the plant, and it won't go any lower. the recommended for this light is 30cm above the canopy, according to this very useful article: https://www.growweedeasy.com/how-far-grow-lights, but it's still in seedling stage and I'm guessing the plant will grow up a bit more, and I can always lower a little bit more. Also it's pretty damn hot, so I don't want to overdo it on the lights. I've been keeping the water consistent and just topped up a little on recommended nutrients (more grow, a little micro, adding a little bloom as it comes closer to flowering). The reason for this is because I want to maintain the consistency of environment and monitor the plant for any signs of unwellness. Because Sativas are sensitive to nutrient burn, I'm being conservative in this respect. The temperature with the light lowered is a steady 26 C, and I'm maintaining the humidity at around 70%. This is pretty good for this strain, as a sativa it likes higher temps and humidity. The water pH is around 5.9, also desirable. I've also been wondering if the plant is getting enough CO2. Is it necessary to buy a measurement device and some CO2 bags? Overall the plant seems very happy and is looking healthy. Day 10: cleaned the inside, added more grow, added more clay pellets since she looks a bit thin and stalky and needs extra support, and there were not many pellets present. Light distance is currently around 60cm. Though it won't go any lower with the straps, I will look at lowering it more with some extra rope as the ideal height will eventually be 30cm for this 250W HPS light. Added more Ph buffer yesterday evening and we're currently sitting around 5.7 ph. I was aiming for 5.8 but this is still acceptable. Temperature is around 25 - 26 C, humidity is around 70%, though I will begin lowering this as she grows. I will probably replace the water sometime this week. Upon further investigation I realised that my water levels were too high, and were possibly suffocating the stem. I reduced water levels by a few cm since I had previously been topping up without realising possible damage. I feel like today is the day that this seedling is finally becoming a plant. She has grown some long roots already. Day 11: I further lowered the light to around 40cm using some extra string. It's not super ideal, but for now it's ok. The plant was falling over it's own weight so I added some extra pellets around it for support and it seems to work. I'm hoping she won't stretch as much now that the light is lowered. The inside fan is still on and on full power to build up extra stem strength and keep temperature down. I'm attempting to keep humidity around 60%, a little lower than before. The temperature is significantly higher with the light lowered, easily maintained by periodically opening the door and leaving in cool air from outside which runs just past the intake fan. I'm slightly concerned about the Monstera Deliciosa plant which is sitting just opposite and above the intake fan. Would this have any effects, positive or negative, on the grow? Google is coming back blank on this.
Likes
4
Share
Transplant from a 2 gallon into a 25 liter Hercules pots . No rush .I marked with three yellow crosses for the plant that was transplanted second
Likes
3
Share
I took David Robinson's tip a little late " dont grow small flowers" So I took anything that was taking away from the main coals. Of that works out in my favour I will have to find out !! There is a large story behind there fine ladies . But for now let's just say f*ck cancer.
Likes
8
Share
This week I have made a video to show The progress over 4 weeks trying to be a bit different on GD! Hope you like! Was a little worried when this one didn’t pick up her pace but I gathered I had over watered and put a heat mat under her for a couple of days! And that sorted her right out! I have trained with pipe cleaners to hold those stems down as they allow the lower coverage to rise! Everything going smoothly! I hope you like buddies!
Likes
35
Share
Likes
21
Share
I have made this week as it’s the 4 week mark (28 days) I’ve made a video to show the progress she has made! This is my favourite baby girl! She has shown so much vigor from the beginning! I have only had to adjust the ties this week was considering another top but I won’t as I may not have space! I’ve added a picture of the base of my Airpots and I’m proud to say the roots are all coming through nice and thick (photo example) I have also added my ppm results now and am going to be filtering my water so I lose the initial 200+ in my water already! I will 12-12 when she hits 6 weeks! Hope you enjoy buddies!
Processing
Likes
9
Share
Have been overfeeding these little lady's. Giving them some ph adjusted tap water to flush any excess nutes out of their systems. You can see some unusual growth at the newer most leaves. (Not the typical 5 tipped leaf like you should be seeing.) From what I understand this is a sign of too much nitrogen in my plants. Other than that these girls are holding up well. And I'll be cloning some of the strongest phenotype for a friend soon. 😉🌿
Processing
Likes
20
Share
I have made a video to represent the 4 Weeks and four week mark (28 days old) this week has been pure progress and training! I actually made a boo boo this morning before feeding on 1 of my criticals and had to remove my pipe cleaners and postpone training as I have split the main stem into 2 (after reading about that today SMH) but I’ve dealt with this before and I shall wait for it to heal I have used plant ties and tightened it to hold back in place and now waiting game maybe 3-5 days while healing and I’ll scrog from there as I’m looking to go 12-12 at the 6 week mark! Hope you enjoy the video! Bringing a little difference to GD! I’ve added my ppm’s too as I have an EC/TDS meter now! Happy growing buddies!
Likes
39
Share
@BigDaddyK
Follow
Testing the drill pump , remember the hose always has water in it haha 😂 The reason I use 6 inch net pots , is because it’s easy to interchange between small and big pots , some people use the 10 inch net pots , it’s too hard to start in , I want to be as quick as possible , the more lst or defoliation you do will delay flowering The really useful boxes have a little lip that you can drill LST anchor points , you can still remove lid without any issues, only drill through lid , DO NOT DRILL WITH LID IN PLACE , I used a 5mm drill bit Drilled the lid on the Wham Bam boxes , and dropped two purple lemonade in have also cut the locking part of the lid off , it’s a ball ache to open otherwise 😜 RESULT - the really useful boxes are amazing , the other ones are ok , but these 35litre are the best
Processing
Likes
17
Share
this week is a bit frustrating im having some small issue with root rot im off to the store to buy some drip clean from house and garden and ill be doing a water change today i will also topped them after fourth set of leaves day 7 system flush and cleaned. adjusted ppm to 750 i will be using sterile rez from now on as i dont want to battle with pythium. added drip clean and peroxide 30% as suggested by my local hydro store now water looks pristine onto week 5 tomorow.
Likes
32
Share
@BigDaddyK
Follow
Spiderfarmer SF2000 - https://www.ebay.co.uk/itm/SF2000LED/223607946358
Likes
6
Share
@Ferenc
Follow
Hey! Just back well I started a diary but stopped growing so placed to my friend's house. Now I decided to be back and yeah here we go.... They are nice fertilization happens 3x a week with the mixture of Biobizz family (Biobloom, Topmax, BioGrow, Epsom salt, Gunokalong extract.) They grow as hell. 600W LED, 18 hours on 6 hours off, 200 ml water per plant a day, humidity approx 35 percent. Day 49: More LST has been done they grow unbelievably fast...
Likes
18
Share
@Ageddd
Follow
Another cold week, we are having around 2ºC Minimum temperature, and its really cold at night( I mean, for Spain, because if some Nortern people hear this may be laughting at me hahaha) But there is a range of hours when then sun hits directly the plant if its not cloudy, like 6h-8h, this if i dont have to roll out the awning, so the plant is protected when raining. Did not feed the plant until past the middle of the week, because i ovserbed that the flowers were developing slowly as im accostummed, probably because of the low temperatures, so i decided to give her the last feeding and start the flush at the end of this week, because i felt the plant was like at least 2 weeks from proper harvest, and still developing the flowers with white hairs... Im looking for something narcotic with a nice Therpenoid Profile so the later the better in my opinion, but without passing he Ripper Line hahaha :) So last feeding was like a fattening one... Higher Dose of nutrients for the plant, and later added some Micro Vita to the soil, 3grams, and until the end with water and some carbs in 1/2 irrigations ... What amazed me is the strenght of this plant, surviving these really low temperatures, growing a little slowlier, but without problems or buds, amazing plant, as amazing as beautiful, im in love with the colours.. So i hope you enjoyed reading this week Growmmies :) Have a nice week and dont forget to roll one ^^ Good vibezz.
Likes
18
Share
@Ageddd
Follow
Another cold week, we are having around 2ºC Minimum temperature, and its really cold at night( I mean, for Spain, because if some Nortern people hear this may be laughting at me hahaha) But there is a range of hours when then sun hits directly the plant if its not cloudy, like 6h-8h, this if i dont have to roll out the awning, so the plant is protected when raining. Did not feed the plant until past the middle of the week, because i ovserbed that the flowers were developing slowly as im accostummed, probably because of the low temperatures, so i decided to give her the last feeding and start the flush at the end of this week, because i felt the plant was like at least 2 weeks from proper harvest, and still developing the flowers with white hairs... Im looking for something narcotic with a nice Therpenoid Profile so the later the better in my opinion, but without passing he Ripper Line hahaha :) So last feeding was like a fattening one... Higher Dose of nutrients for the plant, and later added some Micro Vita to the soil, 3grams, and until the end with water and some carbs in 1/2 irrigations ... What amazed me is the strenght of this plant, surviving these really low temperatures, growing a little slowlier, but without problems or buds, amazing plant, as amazing as beautiful, im in love with the colours.. So i hope you enjoyed reading this week Growmmies :) Have a nice week and dont forget to roll one ^^ Good vibezz.