Likes
Comments
Share
@MotasKush
Follow
50th day of flowering behind us Purple Punch X Do-si-dos # 1 and # 2 ripen trichomes are milky, at the end of 8 weeks they will go under the scythe. Zombie Kush has a moment too, it looks unbelievable, the resin is fluffy and the velvet splendor. And bananas hopefully they will be good .. We are looking forward to the harvest! Thanks a lot to everyone who likes the diary, let it grow! Thanks!
Likes
3
Share
@GrowBro87
Follow
Es geht gegen Ende hin. Bin sehr gespannt auf das Ergebnis. Hoffe sie ist jetzt bald fertig.
Likes
16
Share
@MarcGrows
Follow
Great week. Girls finishing up and taking longer to drink. Checked trichomes and this plant is ready with mostly cloudy and a spattering of amber. Will harvest tomorrow morning and will provide weights and measures after harvest. Will dry in tent without light and offset circulation. Will keep tent naturally at 67 degrees. I will need to assist with humidifier to get humidity to around 60 RH. Perhaps a wicking cloth in a bucket? Just thinking out options. Update: Cut down the girls and hang them up to dry. Great thick hard buds. Can't wait to see what they smoke like, but it is going to take time to dry. Thanks to everyone that helped to make this a successful harvest. I will weigh the harvest before starting cure after a closer trim.
Likes
19
Share
Good week, she's cloudy so I'll be chopping at the end of the week.
Likes
9
Share
Les fleure son bien.compact et bien givré . Les arome d'agrumes son très forte av3c une légère différence entre les trois . Plus tropical sur 2 des 3 pheno. J'ai eu la chance d'avoir 3 pheno different . Une bien bourgogne , une avec des touche mauve et roser et la derniere plus verte avec un peut de violet. Bien hâte à la fin du séchage pour goûter. Cela fait 6 jour quelle son couper
Likes
40
Share
Raised the light a bit the girls that are stretching! Gave em a decent defoliation, but they really didnt need to much! The buds are stacking up nice and i think the plants are in their final form!
Likes
6
Share
Hallo zusammen šŸ¤™. Sie wƤchst sehr schƶn und macht keine UmstƤnde.
Likes
13
Share
šŸ“† Semana 6 La fase de engorde entra en pleno rendimiento y los cogollos aumentan de volumen de forma notable. Los cĆ”lices comienzan a apilarse, formando flores muy compactas, densas y completamente cubiertas de resina. El aroma se intensifica rĆ”pidamente, mostrando cada vez mĆ”s el carĆ”cter dulce y afrutado de la genĆ©tica. La estructura permanece firme y equilibrada, permitiendo que la luz alcance toda la canopia y favoreciendo una maduración uniforme. El consumo de agua y nutrientes continĆŗa en uno de sus puntos mĆ”s altos, por lo que mantener un riego constante y una nutrición estable resulta fundamental para sostener el ritmo de desarrollo. ⚔ EC: 1.9 šŸ’§ pH: 6.2–6.5 šŸŒ”ļø Agua: 20–22°C šŸŒ«ļø Humedad: 40–45% šŸ’” PPFD: 1050–1100 µmol/m²/s šŸŒ”ļø Temperatura: 24–27°C šŸ”„ Nota: En esta etapa la prioridad es mantener la mĆ”xima estabilidad, clima controlado y una nutrición equilibrada. Seguimos creciendo fuerte šŸ’Ŗ!
Likes
2
Share
? Blueberry Muffin – Pheno A Week 5 | The Beginning of Automation Some weeks are about explosive growth. Others are about building the foundation for everything that comes next. This week was definitely the second. Blueberry Muffin Pheno A has officially entered that fascinating transition where vegetative growth begins to merge with the first signs of flowering. The structure is now well established, side branches are reaching confidently toward the canopy, and every day she looks a little less like a seedling and a little more like the productive plant she’s destined to become. One of the biggest milestones this week wasn’t something the plant did… It was something I changed. āø» šŸ¤– Welcome to the AutoPot System This week Pheno A officially moved onto the AutoPot irrigation system. For anyone unfamiliar with it, an AutoPot is a passive watering system that feeds plants from the bottom rather than from the top. Instead of watering every day, a reservoir supplies nutrient solution through tubing to an AquaValve located underneath each pot. The AquaValve is actually the clever part of the entire system. Rather than continuously flooding the tray, it works like a mechanical float valve. As the tray empties and the plant consumes the nutrient solution, the valve automatically opens and refills the tray to a precise level before closing again. No electricity. No timers. No programming. Just simple engineering allowing the plant to decide when it’s ready for another drink. The result is a much more consistent root environment while eliminating daily hand watering. āø» 🌱 Learning a New Way to Grow Whenever I introduce a new piece of equipment, I don’t simply install it and hope for the best. I observe. I adapt. I learn. Because the nutrient solution now remains inside a shared reservoir, I also adjusted the feeding program. Some additives that perform wonderfully during hand watering aren’t ideal when they remain sitting in a reservoir for several days. For that reason, Sugar Royal and Power Roots were removed from the reservoir while continuing to use the remaining Plagron nutrients that are perfectly suited for AutoPot cultivation. It’s a small adjustment… …but one that helps keep the nutrient solution cleaner and more stable throughout the week. āø» 🌿 Growth Update Blueberry Muffin has responded beautifully. Internode spacing remains tight, the branching continues to develop evenly, and the canopy is beginning to spread naturally without forcing the plant into shape. The side branches that only recently sat beneath the canopy are now confidently pushing upward, creating the framework that should support numerous flowering sites over the coming weeks. The bird’s-eye photographs really show how symmetrical she’s becoming, while the side profiles reveal just how quickly those secondary branches are catching up. It’s one of those moments where you stop looking at individual leaves and start seeing the architecture of the plant itself. āø» šŸŒ”ļø Environment The room continues running intentionally warm. Day temperatures reached around 31°C while relative humidity averaged approximately 72%. Normally those humidity numbers might raise eyebrows during flowering. However, this is still the very beginning of bloom, where maintaining higher humidity encourages vigorous growth, active transpiration and continued expansion before the flowers begin stacking seriously. As flowering progresses, humidity will gradually be reduced to create a safer environment for dense buds while maintaining an appropriate VPD. Everything is part of the plan. Nothing is accidental. āø» šŸ½ļø Feeding This week’s reservoir was prepared using: • Terra Grow – 1.8 ml/L • Terra Bloom – 1.9 ml/L • Pure Zym – 1 ml/L • Power Buds – 1 ml/L • pH adjusted to approximately 6.05 • EC around 1.83 mS/cm By keeping the solution simple and reservoir-friendly, the AutoPot system can do exactly what it’s designed to do—deliver a consistent nutrient profile every time the AquaValve opens. āø» šŸ“ø This Week Behind the Lens The photographs this week tell the story perfectly. Bird’s-eye shots reveal a beautifully balanced canopy beginning to fill its space, while the side views highlight strong vertical development and excellent branch formation. One image captures the AquaValve itself—the tiny mechanical heart of the AutoPot system quietly doing its job. Another shows the reservoir that now feeds the plant automatically, reminding us that successful growing isn’t always about adding complexity. Sometimes it’s about making things simpler. āø» šŸ” Looking Ahead Next week should be incredibly exciting. With the AutoPot system now fully active and Blueberry Muffin comfortably settled into automated feeding, I expect vertical growth to accelerate as flowering becomes more established. The coming days should reveal the first real stretch, increased flower development, and an even more defined canopy. The real show is only just beginning. āø» šŸ’š Thank You A huge thank you to everyone following this adventure—from day one supporters to those who have only recently joined. Whether you’re here to learn, share ideas, ask questions, cheer the plants on, or even challenge my methods, every interaction helps make this diary a better place for growers around the world. Special thanks to: šŸ’š GrowDiaries for providing a platform where growers can document their journeys openly. Zamnesia for the incredible Blueberry Muffin genetics that continue to impress with their vigor and structure. 🌱 Plagron for supplying the nutrition and soil that keep these plants thriving. šŸ’” Future of Grow LED for delivering the light that drives every stage of development. And finally… Thank you for taking the time to follow along. Every comment, every question, every bit of encouragement—and yes, even every constructive criticism—helps this project grow alongside the plants themselves. Growers Love and see you next week, where I hope Blueberry Muffin begins to show us exactly why she’s earned her place in this 8Ɨ8 adventure. šŸŒ±šŸ’š
Likes
7
Share
Its my first season. Such a great experience. Trying to keep up the good work. Thanks for likes and commentingšŸ™šŸ» šŸ’Æ
Likes
4
Share
@QixxGrows
Follow
Day15 - Day17: I had some difficulties to get the humidity right. It was either too high or fluctuating too much. I ended up getting a timer for the plug and running the humidifier 15mins every hour. To help with air flow, I have the main duct fan running 4 times a day for an hour. To ensure that there's airflow around the plant, I have a fan in the light as well as a smaller clip-on fan that runs during light hours. I'm not sure how the camera moved on day17... I only watered it mid-day. Day18: The timer on the humidifier and Duct Fan is now keeping the humidity in a good space. VPD now under control Day19: The Vivosun controller perfectly adapted the lighting schedule to an hour earlier, to ensure 6hrs of darkness. UInfortunately the RPi kept it's 04:00 schedule (makes sense). So I captured an hour of darkness. Adapted everything. Will have 18hrs again from Day20 onwards. Day20: In the next days I'll lift the camera higher for a better view of what's happening up top. My mesh-netting-dingsbums will arrive and I'll use this as a platform for the pi+camera. Day21: I'm not sure if I like this angle. I'll only keep it like this until she goes into veg-mode. It at least shows the new nodes growing from different perspective
Likes
8
Share
@Kelly420
Follow
Fattening up. Started using Herculean harvest. I’m liking it.
Likes
17
Share
Well.. nice start of a new week. Still stretching so today changing water for fresh water. Going to level up the EC from tapwater 0.3 tot 0.7 with CalMag before adding nutrients. Then raising the EC to 2.2 I hope (depending on the PH not dropping below 5.8). Hopefully they will consume less water and therefore stop stretching.. We will just see what happens. Easy to lower EC afterwards and also easy to raise PH. I just have to add some tapwater. 13/7 some shortages and maybe too much light. Reducing time with half an hour daily. Raised EC to 2.3
Likes
30
Share
1/9 Both finally transplanted to 7gal Fabric pots. Plant 2 is doing really well, no stopping her now!! Plant 1 is doing slightly better than she was, going to give a slight defoliation over the coming week and hope she picks up. 2/9 plant 1 is slowly getting her shit together I think, I'm going to leave her be as much as I can this week. Plant 2 is doing me proud, recovered well after transplant/topping I'm going to continue training her as I see fit. 3/9 #2 has been fed today, nothing for #1. #1 is slowly getting there now, #2 is still going strong as everšŸ’Ŗ I think I may take a few clones off her soon 4/9 been noticing a few wet patches the past couple of days, had a biting a trim and will continue to do so as needed. Plant 1 is starting to do her thing now too, plant 2 going string as usual. Both have had a little trim ....can't remember if i watered or fed today šŸ˜‚ 5/9 no comment today, tired out 6/9 plant 1 doing well now, shes starting to look quite hungry sevill give her a feed tomorrow of the easy boost 123 combo. Plant 2 doing her thing as usual šŸ’š
Likes
20
Share
@Dunk_Junk
Follow
Chopped during the week and drying now............ The first pics are taken just before harvest. Video is as it is drying out. Dry weight 140 g!!!!!!!!! Very pleased with this. Nice genetics, I'm excited to do more strains for Barneys Farm.
Likes
5
Share
Likes
9
Share
8/4 the plants are looking great. Was able to use listing and get bunch on bud site to come out. No discoloration. Things going well. Might need flipped soon. 8/6 the second topped plant looking good. Did some defoliation. Think going to flip soon. They looking good with a nice top canopy forming, have lot of bud site at close the same height. 8/8 plants look great and ready to switch to flower. Did some more defoliation to get ready for flower. Setup scrog net and seems to be filling up nice. Going to do 36 hours of darkness to quicken the flower process (or so I read). Excited to start flowering.
Likes
2
Share
Still don't know if it's a MALE or female? But I'm excited for my next year grow outside. The climate i live in I didn't think a weed would thrive outside but this one is. Praying it's a female so i can see how flowering stage handles the out doors. Our summer are mild and it gets chilly at night but it seem to be ok with the climate so next year I am going to plant at least 3 outside and see what happens
Likes
9
Share
Decent week. I had some trouble figuring out my nutes in this tiny pot but she's doing her job. I'm thinking top dressing is not the easiest way to go on a tiny pot lol. But hey she's alive and getting frosty so it's good. Haha
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
46
Share
@valiotoro
Follow
Feel Good Inc.šŸ¤™Exceptional! No matter the pheno, this RS11 is straight fire! šŸ”„ When I open the tent, the terps hit like sticking my head into a bowl of exotic fruit, with notes of orange zest and gas šŸŠšŸ’Ø