4 new strains coming!! The Vally: SFV x SFV Lime Vally: SubLIMEinaL x SFV Gorilla Vally: Royal Gorilla x SFV Peyote Vally: Peyote Gorilla c SFV So much pollen and I see seeds starting!! Pulled male flowers for pollen harvest every one is well pollenated going to save some pollen for future use!!

Lollipoped had some wind damage up top also, overall I’m learning a lot and wanting to keep learning more tomorrow I’m doing more ipm with captain jacks dead bug

On day 1 things are going well. The buds are getting larger by the day and I'm starting to smell the terps. This is an interesting one, I can't figure it out just yet but there seems to be grapefruit in the background at least. I also did my last defoliation to bring in more light to the canopy. On day 3 the girls are doing well. My PH pen broke so I'm back to indicator drops until amazon hooks me up with a new probe. On day 4 the plants are doing well. I applied my final BTI treatment. The fungus gnat population is way down and almost completely eradicated. The girls are putting on more trichs everyday and the smell is increasing :) On day 5 I see no more fungus gnats :) I should receive my PH pen tomorrow and will finally be able to adjust my reservoirs pH with more precision. On day 6 the plants are doing well. On day 7 my new PH pen was ready for use. I discovered my reservoir got down to 5.5 PH yikes! I used PH up to get the PH to 6.1. I then changed out my reservoir with new nutrients. I PH'ed to 6.1

THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

week 27 18.10.2024 near harvest 19.10.2024 2nd partial harvest 20.10.2024 ca. 4g of dry buds

This week they preflowering and this strain very fast flowering just bit short and she won't strech much in preflowering Day 49 end week 7 both plant very bushy and healthy

Week 10: I loved growing this strain, it smelled so fruity while the buds were on the plant. Towards the end of flowering the buds looked sugar dipped as described on the website. The sap from inside the stems smells like skittles and sugar lol which was a nice surprise! Most pistils are Amber so idk what the THC/CBD ratios are going to be. Il give an estimate once buds are cured for 2 weeks or so! So I’ve managed to get some street weed to compare alongside my own weed and I’ve added the pictures to the harvest so you guys can see them. I tried to pick the best street weed from about 4 varieties so here we go... The street weed is called Wedding Cake, my weed is obviously Smoothie and I suppose what I want to know is how the street weed looks, does it look healthy? Any guesses as to how it was dried or cured if even? The first noticeable thing is that the street weed stems are huge and the sugar leaves seem to be left on the plant to dry too. Although I did leave sugar leaves on this time I feel that it’s not very professional. I have smoked a joint of the wedding cake and it’s not all that great, feel a bit sedated/couch locked but not high or happy if you know what I mean :) but yeah please let me know what you think in the comments :) Curing Update: (1) Been curing for a week and buds are definitely smoking much better now, the taste and burn still isn’t amazing as it needs a few more weeks curing but it’s unique and exotic. It’s very strong when it comes to THC, because it still needs further curing you could smoke a whole joint and think damn that’s still too fresh to get me blazed. By the end of the joint you would be struggling to keep a conversation or stand up, Stoned eyes that even eye drops won’t cure :’D and it’s also a real head high in my opinion, audio/visuals definitely enhanced too, everything is extremely bright, sharp and sounds great! I don’t really care about time of day smoke as i could need something stronger at different times for pain etc but this is definitely a Nighttime smoke, it hits so hard that the best thing you can do is put on some music and close your eyes or watch a movie. An amazing strain for zoning out entirely into some chill music and if you need weed to deal with strong physical or mental pain or sleep problems then I would recommend giving this a go as so far it has been a lifesaver for me. Curing Update: (2) So I think the buds have been curing for just over 2 weeks now and they are looking great and smoking pretty well too. A few more days drying wouldn’t have hurt them but I’m not worried as my Blue Cheese and Pineapple Express harvests are just around the corner! I added some lovely photos and a video to show you guys how it looks And I’m just about to blaze up a joint from the last photo and tell you all how it smokes too... (Lights up joint) Slightly damp on lighting it up although it burns near perfect. Instant hit on the back of the throat with smooth/mango flavors. I feel a bit dizzy quite quickly and want to sit down and listen to music after a few tokes followed by a relaxed or mellow feeling. I’m about halfway through the joint now and I’m pretty stoned. Definitely sweet and smooth like blueberry also sherbet sweet like mango! I’m almost finished my joint now and I suppose to sum up I’d say that it’s much like the blueberry smoothness you expect mixed with the strength from a well grown mango. I felt that the effects are great if your in a nice comfortable setting, get relaxed, be creative, watch a movie or even get ready to sleep. I would avoid anything that requires a lot of effort. Personally I’ve had minimal problems with getting to sleep and with anxiety while taking this throughout the day and would highly recommend it! It’s the best thing I’ve grown so far :) Il leave a final review on the buds in 2 weeks, until then take care and happy growing! Curing Update (3) - 05/03/20 So I’ve finished the smoothie buds and I have to say they were great. The only negative was it’s my first time drying buds with trim and they could have done with a little longer drying. I made some canna butter from 3G of trim and 2.25g of bud. I made ginger cupcakes with salted caramel icing. You guys can see it cause I added a photo. I can only eat 2 per day with a heavy tolerance - sedative cupcakes hahah. And check out my blue cheese and Pineapple Express diaries as it’s harvest time!

I dont got much time rn, so im gonna update the fertilizer stuff later

Nice strain for scrog.

still spraying tiresias mist Sunday gonna be my last day of the mist and sit back and wait for pollen sacks (or as I like to say nut sacks )

Day 70 for these Fastbuds beauties Blackberry Auto: With dark purple buds glowing fiercely and a dank smell to match, this girl could make anyone's tent look amazing. During the last few weeks her buds have become incredibly dense and sticky. She is very short and thick in stature compared to the other plants I have in flower. I inspected her trichomes over the weekend and ive determined that she is pretty much ready for harvesr. I expect about 2 oz of high quality flower after dry/cure. Forbidden Runtz Auto I'm really blown away with the turnaround in this girl. She was mutated & so small I almost tossed her out during early veg; I'm glad I changed my mind. She stretched significantly between weeks 4-6 and I really wasn't expecting much from her. In reality, she has blown my mind... incredibly dense and sticky buds have developed in the past 4 weeks. She's got the zkittles smell mixed with a gassy terp profile.. I think the higher humidity through flowering phase really helped develop these dense buds. When I checked her trichomes over the weekend I determined that she will be cut down within the next 7-10 days. Process/ Environment changes: - Lowered my SF4000 roughly 20 cm to increase photon delivery to the canopy - Water/kelp meal only from this point to harvest - My temperature has risen due to change of seasons .. roughly at 27-28 deg C during daytime.. this is why I lowered my lights rather than turning them up - Defoliating any unnecessary fan leaves at every chance I get - I've had to use spools of twist tie to use to keep the branches from falling over from their own weight. I'll tie one end to the top of a branch, and the other to the stock. Not ideal but its working. Cheese auto dry/ cure update: After 10 full days of drying, I gave the buds a decent trim and put them inside glass jars where they will remain for many weeks. I add 2 way Boveda humidity packs to help regulate the relative humidity within the containers. I also use tiny hydrometer pucks to measure the humidity and temperature inside the jars. My ideal cure is at 62% RH

The plantas get a little bit struck, I don't know what's going on, I will start a new phase off fertilizer from advanced nutrients.

Beginning of week 9, the usual SST foliar and and 5l via drip, also 5l of rain water into the reservoir yesterday . I’ll probably veg week 10 & 11 maybe , want to fill the scrogg and stretch the tops after flip

Week5 the temperatures dropped a bit and I did what I could...❄️❄️ Earlier this week I had to flush this little one because I thought she had nitrogen toxicity. Maybe not... But From the water that ran out I realized that the soil was full of nuts and after the flush I didn't give it any more water. as I use a 12 liter vase, you can imagine how much water was retained in the root system. for that reason and because the water is good quality and has an amount of micronutrients, I didn't have to worry about giving water this week. let's see next week, wish me luck 🤞☺️🌞

With the majority of trichomes now turned milky with some turning Amber, i have decided to begin a 10 day flush using nothing but ph balanced water. Doing a shorter than normal flush as the plants with deficiencies don't have much nutes to use up.

Máme tu dosť silné búrky so silným vetrom.rastlina 1 dostala zabrať.jeden konár spadnutý na zemi,ale nebol zlomený.použil som pletivo ako podporu.stále vyzerajú ok.dnes posledné kŕmenie .držte im palce.mier

En esta semana he visto que tengo trips y le he hecho 2 riegos foliar uno con insecticida y el otro con Jabón Potásico y Aceite de Neem

Week went good some are further along then others but they all looking beautiful fan leaves starting to yellow and purple and such on some then others they just stretching still they won’t all finish at same time I don’t think but it’s ok

Day 15 - Gave the girls 500ml of plain RO at 6.3(ish) PH. Watered in a ring around 'em to encourage the roots to spread out. Day 16 - Didn't do anything today just monitoring grow environment Temp, RH, Leaf Temp, VPD etc. Day 17 - Waterred 'em down again, 500ml plain RO at ~ 5.9 PH. Days 18 &19 - Nothing done, just monitoring the grow environment Temp, RH, Leaf Temp, VPD, etc. Day 20 - Waterred 'em down with around 700ml plain RO at ~ 6.1 PH. Day 21 - Didn't do anything today just monitoring grow environment Temp, RH, Leaf Temp, VPD etc. Notes: I'm starting an Arduino project that automatically waters the plants based on the soil moisture and will calculate weekly water consumption. I already have one setup that does all of that and has a water level indicator that alerts me when the water level is low. Automatic Watering Kit: https://www.adafruit.com/product/4746 Soil Moisture Kit: https://www.adafruit.com/product/4241