Smelling strong got a lil crispy on some tops but looking real good overall a pretty maxed out 5x5. It's gonna be a trim fest.

1/18: Got my new 10t Dabpress...bout to get sticky up in here... Built another DIY Co2 maker and put it in the bottom of the tiny tent with the other Co2 makers...that air is exhausted into the closet, so any CO2 not utilized in the tent has another chance at being used before being exhausted from the building. Seems like the new UVB bulb is intense enough to stress the plants.👍 1/19: Fed today. Added humic acid. Took some photos and video...ooh la la...😍 1/20: Took photos of the ladies in the tiny tent....yowsa!

Actualización: Día 1 de Floración (Fotoperíodo 12/12) ​Proyecto: Conservación Genética y Evaluación Fenotípica en Planta Madre Multi-injertada ​1. Infraestructura y Manejo Ambiental ​Ubicación e Instalaciones: Floración en invernadero de exterior. Protección Fitosanitaria: Malla anti-trips de alta densidad para exclusión biológica y prevención de vectores de virus. Manejo de Radiación: Malla sombra tipo Raschel al 30% para la gestión de la radiación fotosintéticamente activa (PAR), reduciendo la radiación infrarroja y mitigando el estrés térmico en la canopia. 2. Física del Sustrato y Zona Radicular ​Composición del Sustrato: Mezcla inerte de coco en proporción 50/50: ​50% Chips de coco: Aporte de macroporosidad, aireación y prevención de compactación. 50% Fibra de coco (granulometría media): Retención hídrica uniforme y óptima Capacidad de Intercambio Catiónico (CIC). Portainjerto Base: Jarilla Sinaloa (Landrace regional), aprovechando su alto vigor de exploración radicular para maximizar la absorción metabólica en la estructura del sustrato. ​3. Parámetros de Fertirriego e Hidroponía ​Sistema de Aplicación: Riego por goteo con 8 micropulsos al día automatizado de alta precisión. ​Nutrición: Solución hidropónica de formulación interna, ajustada a los requerimientos morfogenéticos del inicio de floración (stretch). ​Rango de pH: 5.8 – 6.0 (punto dulce para la biodisponibilidad de fósforo, calcio, magnesio y micronutrientes quelados). ​Temperatura del Agua / Solución: 24 °C constante para garantizar niveles óptimos de oxígeno disuelto (DO) y evitar choque térmico en la rizosfera. ​Fracción de Lixiviación (Drenaje): 20% de drenaje por evento de riego, asegurando el lavado continuo de ventas excedentes en el bulbo húmedo y permitiendo el monitoreo exacto de la EC de salida. 4. Estado de la Canopia e Injertos (9) Variedades)​: Conservación de Germoplasma Élite (9 Clones) ​Banana OG, Cookies, Gelato, Black Domina, White Kush, GSC, Skywalker OG, Critical Kush, Cheese & Kush. ​5. Consolidación Vascular y Transición ​Consolidación al 100% de los tejidos xilemáticos y floemáticos en las uniones de injerto. ​Estabilización hídrica completa bajo la presión de flujo del sistema de goteo, garantizando el suministro uniforme de la solución nutritiva a cada uno de los brazos durante la elongación inicial.

4 semana de floración. Se están formando las flores en las puntas y a lo largo de los brazos, empece a aplicar abono de floración pero en bajas dosis, conforme la planta vaya creciendo y necesite mas nutrientes voy a ir subiendo la dosis, quiero evitar a toda costa la sobre fertilización que ha sido mi principal problema y obstáculo en cultivos anteriores. De momento las plantas crecen muy bien. Esta semana voy a aplicar un preventivo para hongos foliares y bichos chupadores (trips, cuanto los odio!). Disculpen la calidad de las fotos, mi cámara no es muy buena.

Harvested week 12. Solid root mass. She yielded about 5-10g which I quick dried and smoked as I had nothing in at the time.

Seguimos avanzando en la floración!. nortes encontramos casi en el ecuador de lo que comenta el calendario de esta variedad. Deciros que está empezando a oler y de una manera interesante. Para mí es un aroma tropical exótico. Seguimos con una buena dieta en fósforo y potasio acompañado de vitaminas y azúcares naturales de remolacha y caña.

A lo ultimo tuve una pequeña plaga de araña roja que pude mantener a raya cortando hojas afectadas, subiendo la humedad y bajando la temperatura... No voy a pesar en húmedo, cuando se sequen nomas... Luego de cosechar las The Ultimate pasare a revegetar ambas, espero que no muera antes jeje... Porque a las otras creo que le quedan mínimo 2 semanas más.

Shit got out of control, i had to perform an LST to keep the big sister under control and she is the biggest plant I’ve ever grown although She is developing buds everywhere and im not really sure but for me this is bad as i think sometimes less is more, its clear that the plant just can’t distribute the same nutrients on 10 buds/20buds, so i expect them to be soft and not potent, maybe THAT xxl pheno, im sure someone else could have get even more, shame that I can’t clone her Little sister is looking so nice tho, Perfect structure, just amazing looking and beautiful to its maximum

.just watering with monomagnesium and starting flowerbooster . She’s starting to yellow up from the down to upper parts . It’s getting hot like 26-28 degrees that’s not optimal and leafes are hanging a bit on the lower parts . Overall she’s still doing great . Added a 2nd mars hydro fan to the lower part of the tent. Should’ve listened to my bro @laxx who said it ain’t that smart growing in the tent at this time of the year . He was unfortunately right . But we keep going let’s see if the weather gets better or if she’s fighting through it or not :D Every day is a learning :D

Empezamos la 7a semana con 49 dias de vida , el proyecto A ha cogido una fuerza espectacular en general, se estan haciendo unos monstruos, lo puedes comparar con las ultimas fotos y las nuevas, lucen sanisimas. Seguimos con el riego de elicitación y nutrición de terranabis , estan muy bien alimentadas. Las geneticas se ven bastante fuertes y sanas en general también , vamos a ver donde conseguimos llegar este año ya que dependemos mucho del tiempo de vegetación.

The bud's are not like I wanted it because the room temperature more than 34 degrees 4 weeks ago I think 2 0r 3 weeks flowering to harvest

Hello my friends! I have some good news and bad news this week, [Bad News]First I'll mention that all, yes all of my Purple Urkle's had to go 😰 I was on the phone with a good friend of mine while admiring my garden of green and I spy with my little eyes 😶 a pollen pod containing nanas. So as hard as it was to cut em down, I knew they had to go. I’m honestly relieved to have those time bombs removed from my tent, that’s all I needed was seeded product. I won’t let this discourage me, in fact I’m empowered knowing that I averted this potential crisis :) I’ll still keep me eye out just in case, you never know. [Good News] The other remaining strains, White Widow, Super Silver Haze, CBD Blueberry, & Mazar are doing well. Since I feed them light nutes last time I’m debating if I should feed them a 2nd time, or just use some good ol ph’d tap? They look so good I don’t want to over feed em, then again I want the girls to have plenty of nutrients to avoid potential deficiencies. The CBD was the first to flower, though it’s kind of been flowering on and off for a while. If these results happen with the other CBD seeds I’d probably avoid purchasing this product again, I’m not happy with the mutations that are going on with this plant (this is technically bad news). Back to the point I see signs of flowering in all the girls now! This is where it gets exciting, so pumped for this phase, I’ve waited 78+ days for this! I think that’s enough rambling, I’ll get right into the Individual Progress Notes, enjoy :) ~ Individual Progress Notes ~ [CBD] Height: 24.8” Tops: 8 Notes: This one is about 1 - 2 weeks ahead of the others, which are just showing their “hairs” now. I’m on the fence, I’m not sure how this CBD is going to be as a finished product. I hope the other seeds I have don’t have the same mutations... I haven’t had any contact from GCS since their reply. I’ll still write them a report when this girl is harvested, that would probably be better in the long run so they have more information about these mutations I’m experiencing. [Mazar] Height: 22.3” Tops: 16 Notes: I’ll just say she looked like a perfect orb when I removed the trellis netting to realign the family. A very even growth rate, with a consistent distance between nodes, beautiful. The genetics for Mazar here is amazing, now I can’t say this for sure but for now her growth and shape is fantastic and beyond my expectations. [Super Silver Haze] Height: 22.5” Tops: 16 Notes: Talk about sudden growth! This beastie was one of my smallest girls and just like my friend here on GD called it, she shot up! She also has the biggest fan leaves (not the most fingers). Now that she has more room to spread out and breath I’m sure she’ll grow even more. [White Widow] Height: 23.3” Tops: 16 Notes: Tanya here is growing so well, very happy. Her leaves still have that blue steel, green look. I love it! Other than the mazar she has the 2nd most bud sites. Soon, very soon we’ll see flowers starting to develop. I noticed some possible nute burn/deficiencies with a couple of her fans so I’ll use ph’d water next feeding to see if the condition stabilizes, I’ll know by then. ~ Final Thoughts ~ It’s been a long run so far my friends. I can’t say everything has gone as planned, but I avoided a huge blow to my product by noticing the pollen pods developing on the Purple Urkle females. This transition has gone well so far, no shock or hardcore deficiencies. Again, thank you all for your kind words and support! Much love, Meus

Running into some rookie mistakes with PH and nutrients 😫. Getting her healthy again with help from friends though! Love this light so much!!

💨 ⛵️

It’s now showing pistils pretty well, and I got some critical peyote from Barney farms In a napkin right now There is a little burnt tip on fan leaves I think too much nitrogen since it’s in the big pot and the leaves are dark green. But looks good happy I picked the internodes during preflower too