The Grow Awards 2026 🏆
Likes
Comments
Share
@russrahl
Follow
Started their flush this week, hairs are starting to go almost all red on 2 of the 4, 3rd one is starting to turn as well but the 4th largest one that seems to be behind the others is still way behind. I think she got stressed at the wrong time when I broke one of her main branches at the beginning of flowering. But the other 3 are packing it on and really starting to fatten up. Lots of bud sites now with decent nugs. Tricombs are still a week at least out from being full cloudy I believe, but we will see. Guessing we gonna get a 1.5-2 week flush maybe before there ready. Should really ripen up these buds. Still thinking we are gonna push them 60 days at least. Well that’s about it for this week, Cheers! 💨
Likes
6
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Khalifa Genetics, team davvero al top, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Purtroppo ho perso i file delle scorse settimane e dovrò reiniziare il report da ora scusate per il disagio Grazie a tutti per il supporto ❤️🍀🔥
Likes
10
Share
Plants are doing well, The 84" inch tent is a must if your not training or topping. I removed all the sacks that appeared last week and I haven't seen anymore show up so fingers cross, I check daily. Bigger tent also helps with heat control as the air has more room to rise. Hope you all like the pictures, I started to take videos as they provide more detail with less work.
Likes
6
Share
@MG2009
Follow
05/23/2019 Clones are doing well, so time for momma to bud! Flip to 12 - 12 full power red spectrum see yo next week
Likes
18
Share
Aug 9: defoliated again to remove lower branches and shaded fan leaves that can prevent air circulation. She is doing great with the buds thickening fast. Starting to get smelly too. Got the UV lights out today. This helps Edmonton in August or September be more like California in June or July. Maybe not that effective but that’s the idea. Second year using the UV lights and worked great last year. Aug 10: UV lights going again today.
Likes
16
Share
NICE BLACK-OUT FADE TIPS BURN HERE & THERE CUD AVE TAKEN HER XTRA MORE WK BUT THE OUTDOOR WEATHER WAS TOO RISKY!!
Likes
31
Share
Early veg. Stage Do si dos og by Original Sensible Seeds day 23  lollipoped and stripped the ladys they slept for 36 hours to trigger the far red ... so my ladys are in flowering now still don't feed them with nutes its still enough in my soil .. starting with nutrients in about a week i think they only get some HyPro spray mix HyPro Generator and some HyPro Rootsstimulator 3 days in bloom, and 4 days after defoliation damn where do all these leaves come from 😂 but everything is going well, no defects or other problems to find that was it again Soil: Atami light mix & Plagron Grow Mix mixed! Temp: 25,5 °C Lights: 12/12 Humidity: 54% Ph : 6.0 Water: 1l 23°C CO²: No Mercy Tabs Tds/Ppm: 400 ec 0.8 Nutes by Hy-Pro Fertilizers ml on 1 liter... HyPro : Spraymix 5ml HyPro : Terra vegi & bloom 00ml HyPro : Rootstimulator 5ml HyPro : Generator 00 ml HyPro : Epic Bloom 00 ml Light distance: 24 inch=61cm dimmed to 60%= 600par 1x MarsHydro TS 3000 Air Van: 800m³ Prima Klima AKF : 800m³ can lite 4x 140mm controled Be Quiet pc vans 3 l water cooling airco Diamant... 3.3l humidifier 1.8l dehumidifier Humidity control: Inkbird IHC-200 Temp control cooler/heater: Inkbird ITC-308 My grow room is variable in size 120cmx120cm² Custom Grow space for sog 150cmx150cm for scrog   S.O.G. Sea of Green Thx to Original Sensible Seeds,  HyPro Fertilizers, BTB Grow Supplies, Mars Hydro as our exclusive sponsor of our group The High Community
Likes
22
Share
Ein erfolgreicher grow geht mal wieder zu ende :( Danke an alle die sich diese Dokumentation angeschaut haben.
Likes
10
Share
@Budhunter
Follow
Day 69 of cycle - day 32 of flowering.. My biggest plant in size since I started growing 3 years ago.. I qm really happy with what is coming out of this besuty gelato.. I am impressed by the growth and health of this babe.. many branch sides with many top buds.. the smell is amazing, that good gelato we all know.. let’s fatten it up and I can’t wait to smoke it.. let’s go
Likes
53
Share
@MistaOC
Follow
19.04. Day 83 Day 43 and things remain steady. The two overfed plants are still on pH-adjusted water only. The one in the front is starting to show signs of recovery – looks like the flush is working. The one in the back right, though, is pretty far gone – necrosis has set in deep. At this point, it’s just about damage control. No real comeback expected, but I’ll keep it going. All the other girls are thriving. Still getting 2–2.5 liters of nutrients every two days. Buds are swelling up nicely – and finally, the frost is starting to settle in. Winter is coming! ******************************************* 10L RO Water // ph 6,2 // 1ml/L Regulator // 2ml/L CalMag // 10ml Green Sensation // ph- // every second day *******************************************
Likes
179
Share
Well growmies ive been looking forward to the Cherry Cola , the more she went into flower the more the frost would build up , and that's when the terps came out and they came out strong , there no stealth for this girl 👉 Stinky 👈 Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈.... Can't say I got the Cherry smells but the fuzzy cola oh ya 😍 Amazing 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9 & 10👌👌
Likes
39
Share
Growing & growing. Watering about every 4/5 days now. I believe I had some deficiencies in the amended soil so I added some calimagic to the mix. I felt I had some nutrient issues earlier in the week, so I used some epsom salt spray and it appeared to help a bit.
Likes
Comments
Share
@Kannisho
Follow
Results without automation; everything is done manually, from irrigation to the application of preventative measures
Likes
15
Share
Girls started growing so fast due to the Aloe Vera Juice I had to flop them into flower early. They are just reeking of 🍋 right now smells like I'm in a lemon orchard. I think they are about done the transition. Hope they don't stretch much more.
Likes
42
Share
@Hashy
Follow
Grow diary 11 Stage 1 Days 1-10 By day 4 all was looking good, she had plenty of roots coming out the bottom of the cube. Day 6 I transplanted her to the 3 inch rockwool cubes that had been soaked for 15 mins in this stage nutrient solution and left to drain for 15 mins, then she went into the bigger propagator. Day 10 she had no roots coming out the bottom of the 3 inch cube yet. Over the last few days she has been getting more exposure to the fan, with the lid of the propagator the humidity is on the low side, but i want to get some air movement around her. She has also grown o.k over the last 10 days. She looks healthy enough and is where I would expect her to be in growth. Temp Max 30.6c Avg 26.6c Min 21.2c Humid Max 85% Avg 69.7c Min 45.7% VPD Max 1.86 Avg 1.03 Min 0.44 Hopefully back in 10 days
Likes
5
Share
Likes
9
Share
@Tobecobe
Follow
22/10 - 10l, Nute water top up. 1.5ml CalMag, 1.5ml Grow, 15ml Bloom. 23/10 - Ph raised. 10l water top up. Seems shes just almost doubled her water uptake overnight. Bit of defoliation. Next time Im getting a bigger tent. Its an absolute bastard to get to anything underneath or at the back at the moment, but she seems to be bulking up. Just noticed a tiny brand new sprout right at the base of the plant. Dunno if I should chop or let nature find its way! 25/10 - 10l water top up.
Likes
45
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.
Likes
62
Share
@Chucky324
Follow
Hello. I've harvested the Mega Mouth. WOW!!! I'm very impressed with this strain. Over 1.5 k for 5 plants. and it was finished by Aug 20 with the tents help. I'm trying some new (for me) categories to add to my report. Plant Stretch (PS) 1 to 5- 1 is hardly any stretch. Bud Mutation (BM) 1 to 5- 1 is a beautiful normal bud- 5 is big weird growths like foxtails. Trim- How easy or hard it was to trim up 1- you blow on the branch and hang it up. 5- Is very hard to trim takes a long time. About- Best guess on the THC % (I've been smoking a long time) Resin- 1 is super slippery 5- is very sticky like Gorilla Glue. Size of Buds (SOB) 1- is very small 5- is the biggest buds Dense- 1- is the lightest or fluffiest 5- is the rock hard buds your bud buster has trouble busting up. Plant #1 Wet Trim 1647 g PS. 3.5 BM 3.5 Trim 4 About 21% Resin 4 SoB 4 Dense 4 Finished Dry Weight 289.5 g or 10.33 oz. Plant #2 Wet trim 1606 g PS 3,5 BM 3.9 Trim 4 About 22% Resin 3 SoB 4.7 Dense 4.3 Finished Dry Weight- 302 g or 10.78 oz. Plant #3 Wet Trim 1635 g PS 3.7 BM 3 Trim 2.8 About 20% Resin 2.8 SoB 3.7 Dense 4.5 Finished Dry Weight- 314 g or 11.21 oz. Plant #4 Wet Trim 1753 g PS 2.5 BM 2.5 Trim 3 About 22% Resin 4 Falls off easily- Clumpy Dense 2.5 Final Dry Weight- 343.5 g or 12.26 oz. Plant #5- Wet Trim 1787 g PS 3.5 BM 3.7 Trim 3 About 24% Resin 2.5 Dense 2.5 Finished Dry Weight- 355.5 g or 12.69 oz. The taste is sweet and smooth to go down with a nice balanced buzz. There was some pests around. I found thrips damage in veg and got some Spinosad to take care of that. Saw some fungus gnats around but they didn't do much damage. Easy to grow and trim. This is a recommended strain. Chuck.
Likes
5
Share
@k0nz1
Follow
One plant has some calcium deficit Defoliation Smell slightly getting stronger Buds getting bigger