Likes
Comments
Share
Cal mag and besides that everything looks so Kay so far Added some bloom 6/25
Likes
6
Share
week 3, the whole family is here 3-gal: Runtz from un-feminized seed - showing female! 3 - gal: Grape Stomper from un-feminized bagseed - showing female! 1 gals: two are black ice gelato from un-feminized bagseed - hoping female! remaining are all fem from SeedSupreme 5 gorilla zkittlez 2 amnesia haze 1 bubblegum last two photos show our 720W Ion LED from Grow Gen that came in yesterday! Note that if you purchase this beasty light you should get S-HOOKS from Amazon or wherever for the tallest hanging option. We are on our way. my 10ml dosing syringes just came in as well as my pH calibration kit. I am running a hybrid philosophy when it comes to Medium and feeding. 70/30 Coco/perlite with the following added in for a "living coco" environment: worm castings, bat guano, kelp meal, alfalfa meal, mycorrizhae, and then I'm giving keyword LOWDOSE GENERAL HYDROPONICS FloraGro,FloraMicro,FloraBloom to supplement any nutrients the amended coco can't or isn't providing. Anyone with experience with this?
Likes
79
Share
@Hou_Stone
Follow
I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone
Likes
14
Share
This is week three miss marked the first week
Likes
34
Share
Прошла ещё неделя, деуочка уже очень покрылась трихомами листва на шишках, жаль камера не как не позволяет захватить, но она очень сахарная уже, глаз радует каждый взгляд, борюсь с дефецитом фосфора и калия, запустил не специально, пошла на улучшение но всё равно ещё ей тяжело, надеюсь сильно не скажется на выход, шишки набирают силу и мощь каждую ночь, на утро всегда удивляюсь при открытий бокса)
Likes
6
Share
@Chubbs
Follow
420Fastbuds FBT2302 Week 9 What up what up. Weekly update for these twins. Wow talk about some colas. These have some chunky colas that are just covered in crystals. I'll start checking trichs this week to see how they're looking I'll be looking for an 80/20 split of cloudy to amber. Not seeing to much fade yet but I'll still stop feeding nutes this week and start just giving pH water from there on out until harvest. All in all Happy Growing
Likes
2
Share
Week 5 and PK deficiency has been corrected. Buds are building and feeds have been consistent at the high end of the maxi-bloom ratio - 2.5tsp/10L. Hopefully the higher pk strength doesn’t create any burn issues with the other, healthy plants. Some very light pruning but generally leaving them all alone. Current choice cuts are plants 1,3,4 in terms of overall resilience and moderated nute reqs. This is an all-important consideration before we also start looking at overall aesthetic pheno traits. At least for running the F3s when the time comes. This strain is proving a little more challenging to grow than expected.
Likes
35
Share
Day 77 i turned off the lights at 10 pm Friday and started my ice water flush and 48 hrs of darkness. i have not done ice water flush before, the theory is that the harsh cold forces the plant to build more trichomes to better prepare for pollination its an easy thing to do and takes no extra time so why not try it the water ppm is 435 and the first round run off was 1139 ppm second round of flush 789 ppm. the reason for 2 rounds of flush is in the first flush round the nute's latch onto the water and the second washes them away. i wait 15-20 min between flushes. that's it for today's update keep your stick on the ice Day 78 not much to say really water ppm is at 435 and runoff of round one for the day is 621 i will update with round 2 in an hr. UPDATE: ok so round 2 leaves it at 521 ppm Day 79 ok ppl this is the last day before harvest no water just ice ( i know it melts but its not much water lol ) oddly after over 48 hrs in the dark i have seen no change in the color of the plant it does not matter but i was hoping lol i took some pics for your viewing pleasure
Likes
15
Share
@AustinRon
Follow
LJ4Q23 Flower 10 
HARVEST WEEK _______________________________ Environment Targets (Flower 10 - Harvest) - Scotoperiod: [ 13, h] # Contiguous dark hours daily - TemperatureMax: [ 78, °F] - RH: [57, %] - VPD: [ 1.2, mS] - LightIntensityMax: [ 750, µMol/m2/s] - LightDistance: [ 16.5, “] Fertigation Plan: - RLA Hydro Chart, EC 1.3 - 0.8 - Primer A: [ 6, ml, gal] - Primer B: [ 6, ml, gal] - Silica Skin: [ 2, ml, gal] - Resin Bloom: [ 2, ml, gal] Penultimate 3 Days (before Harvest) - RLA Resin Bloom, EC: 0.8 __ Wed Jan 31, 2024 LJ4Q 64:F:9:1 EC: 1.3 - [x] Runoff Amount: [ 550, ml] - [x] Runoff EC: [ 3.3, mS] __ Thu Feb 1, 2024 LJ4Q 65:F:9:2 - [x] Runoff Amount: [ 650, ml] - [x] Runoff EC: [ 3.2 , mS] __ Fri Feb 2, 2024 LJ4Q 66:F:9:3 Refresh/Dilute Reservoir, EC: [ 1.1, mS] - IF Refresh - Resin Bloom Only @ [ 8, ml, gal] - [x] EC Reservoir, Dark: EC: [ 1.3, mS] - [x] Add 1 Gal, w/ Resin Bloom [ 8, ml, gal], Reservoir EC: [ 1.1, mS] - [x] Runoff Amount: [ 800, ml] - [x] Runoff EC: [ 3.2, mS] __ Sat Feb 3, 2024 LJ4Q 67:F:9:4 - [x] Reduce Feed Duration from 4 Minutes to 3 Minutes (775 ml Runoff is a tad high, yes?) - [x] Trichome Check - Are we Ready to Harvest Tuesday? - [x] Runoff Amount: [ 775, ml] - [x] Runoff EC: [ 2.9, mS] # First Day with Runoff EC Coming Down . . . __ Sun Feb 4, 2024 LJ4Q 68:F:9:5 - [x] Runoff Amount: [ 550 , ml] - [x] Runoff EC: [2.9 , mS] - [x] Dilute Reservoir to EC: [ 0.8, mS] # Resin Bloom: [ 8, ml, gal], EC: 1.0 __ Mon Feb 5, 2024 LJ4Q 69:F:9:6 Add another gallon w/ 8 ml Resin Bloom Only . . . EC Solution: [ ?, mS] EC Reservoir: [ 0.9, mS] - [x] Runoff Amount: [ 75 , ml] - [x] Runoff EC: [ 4.5, mS] __ Tue Feb 6, 2024 # HARVEST DAY 70 !!!! LJ4Q 70:F:9:7
Likes
9
Share
Here we are with some new photos and videos. We're halfway through Week 5. As you can see, I went a bit overboard with the PK. All the leaf tips are burned. Whoops. Next watering will be a bit heavier, and I'll only give a half dose of Bioflores plus a full dose of Cannazym. Then I'll start with the Rokzbastic (Bloombastic?)* hoping it doesn't throw things too far off balance. I think by the end of this week I'll also stop the Bud Factor X – from what I understand, it could leave metallic residues in the smoke later, which would really bother me xD. I admit I've given Bloombastic with every watering except one, always at low doses, but I should have been more careful and pushed less, or at least alternated it more. Temperatures have risen slightly with peaks of 28°C (82°F), though most of the time it stays between 26.9°C and 27.5°C (80.4°F - 81.5°F) (lights on). With lights off, I can't get below 26°C (78.8°F) (except for rare dips to 25.8°C / 78.4°F). Right now the ventilation is maxing out, with humidity sitting between 55-60%. It’s on the high side, but this is the best I can do. The plants seem resilient though, even in these less-than-ideal conditions, and seeing them outside the tent with the lights off gives me hope. Any advice is always welcome! Everything I’m putting into practice comes from others' experiences, carefully followed, and info from friends both online and offline. Stay tuned! Peace.
Likes
4
Share
09/18 -Fastbuds - Cherry Cola (3) (Auto) Day 1 germination dropped into coco coir plugs, in prop tent running under MarsHydro !50W LED, Humidity 99%. 09/23 - Germination week Day 5 Germination - All 3 seeds have popped in coco coir pellets and are coming along accordingly. 1 of the 3 is a little delayed in releasing her leaves but they should spread within the next day or 2.
Likes
3
Share
@BlaKX
Follow
Grüße Growmies im Hochsommer! Der Strain verträgt die Hitze ziemlich gut und wächst ordentlich! Seine Vorblüte hat mittlerweile angefangen samt strech.
Likes
27
Share
I’m overjoyed with the phenos this strain is producing, strong vibrant purples with some serious flavour profiles! Scent Profiles we have: Candy Lemon Sherbet 🍬🍋 Sweet & Piney Diesel 🍭🌲⛽️ Sweet & Tangy Tropical Punch 🏝️🥊 Alongside this, these beauties are the frostiest and the most insanely dense koala looking nugs I’ve ever produced!
Likes
5
Share
Всем привет! Вот и прошла ещё одна неделя! Вчера пересадил из 3 литрового горшка в 15 Растение очень хорошо пережило пересадку! Полёт нормальный! Увидимся на следедующей недели!!
Likes
Comments
Share
@Exempl7fy
Follow
Only problem i have is my GDP is locking out calc or mag and i can’t figure out why, all of the other plants are doing beautiful my hope is for a week 10 flower harvest for all three strains
Likes
1
Share
Plants were trans into 5 gal
Likes
65
Share
Blue Dream'Matic was cut down on March 17, 2018. The pics are from just before harvest. I'll add a Harvest update on GD after she's dried. But I can tell you she smells sooo strong its incredible. Looking forward the smoke report! 👍