Tag 44: getoppt an 4 Zweigen. Tag 47: Ich gebe Alg a mic zur Hitzestress Behandlung ins gießwasser, die Pflanze ist an machen Stellen schon recht hell geworden, aber draußen wird es auch bald Kühler.

Today is Day 50 !! We have started flower an they are just looking amazing! We have switched up the nutrients for flower, instead of 1 tsp bloom and 3 tsp of veg , we just swap 3 tsp of bloom and 1 tsp of veg !! Can’t wait to see what these laddies do this week!!

Hello growers! I want to share some news with you about our second star, Jealousy-2! This girl has been showing something special from the very beginning. Yesterday, we had to tie up her branches as they started bending under the weight of the buds. But despite this, she continues to thrive, and we hope that over these weeks she will become even bigger and stronger. Over the past week, she has been developing normally, and we have been closely monitoring her growth. Her buddies, who were planted a week earlier, were already harvested yesterday, but our Jealousy-2 still has a way to go. We are not rushing and deciding to give her time to become even stronger. Our plan is to let the trichomes become brown by 50% and even more before harvesting her fruits. We are ready to experiment and observe how she develops. This week, we also decided to increase the fertilizer dose from 1500-2000 ppm to 2500 ppm to give our girl an extra energy boost. She looks great - green leaves, no signs of yellowing, and her appearance is impressive. I invite you all to visit us, evaluate our work, like, comment, and ask questions. We are happy to share our experience and communicate with you. See you on our stream!⁶

Woche 9 nr.1: Ende Woche 9 (Tag63) die Blüte hat gut zugelegt, einige Stempel sind braun (ca 1/3), die Fächerblätter fangen langsam an zu verwelken, ein paar habe ich abgeschnitten Trichome habe ich noch nicht unter dem Mikroskop begutachtet. werde ich in Woche 10 machen. bald wird sie reif sein nr.2: mitte Woche 9 (Tag59) die Blüte hat sehr gut zugelegt, kaum braune Stempel, wächst noch, Fächerblätter fangen langsam an zu verwelken, ein paar habe ich abgeschnitten gute Trichomenproduktion momentan bin ich shr zufrieden über meinen low budget balkon grow Düngung: nr.1: tag 63: 0,5 Liter Wasser + 1,5 ml Mairol Blütenwunder nr.2: tag 59: 0,45 Liter Wasser + 1,35ml Mairl Blütenwunder tag 60: 0,5 Liter Wasser + 1,5ml Mairol Blütenwunder

only harvested one plant so far because of my mothers passing and having to take care of that i forgot to water it for 3 days and she dried up the buds still look great and smell awesome will update when i get a chance to smoke it the one i harvested was a accidental topping and this strain took it like a champ this plant killed it for me plant killed it will update in a couple days when the other plant finishes its planed flush time. so update got another 69 grams from plants 2 both taste great and smell wonderful

Start of week 3, the three survivors are doing great! I did happen to find some algae growing on top of one of the rockwool cubes. (This was my fault for not fully covering the tops of them with hydroton to block out light.) As an attempted fix, I cut some square pieces of black cloth that I laid of the top of the cubes to block out the light completely. Hoping removing their light source, the algae will die off and discourage any further growth. If it gets any worse I’ll try using a hydrogen peroxide solution. Day 17, the three ladies are looking nice. Starting to see some nice healthy roots populate inside the buckets. I went ahead and upped their nutrients today. We will see how they are doing in the morning. -FloraFlex - 1.5g/gal of each V1 and V2. -Advanced Nutrients - 1/2 strength MGB and hobbyist additives. **Algae update: seems like using the black cloth to block out all the light has killed off that algae growth and I don’t see anymore so it’s working!** Day 18, I thought one of my plants had root rot. Which was weird for it to happen that fast in less than 24 hours since changing the res. Come to find out it’s just nutrient stain from the Advanced Nutrients, so thank god. #1 and #2 which are growing with FloraFlex got FIMmed today. I’ve topped plants before but never FIM. Not sure if I did it right, but that’s the fun in all this, is experimenting to see what works. Day 20, #1 and #2 are responding well after being FIMmed couple days ago. I decided to FIM #3 as well. I also decided to leave the 4th one out of this diary from here on out since she’s behind. We will stick with the original three that survived from the start. So far I’m really loving their bushy appearance and thick leaves. Their roots are coming out super nice as well! Pretty soon these babies are going to just take off!

Gracias al equipo de MSNL y XpertNutrients sin ellos esto no sería posible. 💐🍁 Forbidden Fruit Auto: Forbidden Fruit Autoflower, llamada así por sus deliciosos sabores, es un cruce entre Cherry Pie, Tangie y Siberian Ruderalis. Esta variedad ofrece efectos estimulantes y relajantes con un sabor afrutado, cítrico y a pino. Ideal para quienes buscan un dulce escape. 🚀🌻 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 3: Ha sido una buena semana, ella ha dado un gran cambio en su lugar definitivo 😎. Se le ha aplicado un tratamiento insecticida con agua + tierra de diatomeas ( 1 cucharadita por litro de agua), también se le aplica un tratamiento fungicida con una infusión de cola de caballo para evitar futuro moho. A partir de ahora se aplica riego por goteo, 1/3 de la dosis recomendada por el fabricante ya que al estar en exterior y en buena tierra, ya tiene bastante comida.

Day 45 - 26/11 - She is looking very good, leaves a perky and buds are growing. Day 47 - 28/11 - The trichome production is really starting nicely, I can start smelling her. Day 49 - 30/11 - She was top dressed with fresh vermicast and a few teaspoon of a top dress mix (at the bottom), all of that was mulched with a layer of erograstus grass. --------- Top dress mix : Equal parts Alfalfa meal, Rock dust, Kelp meal, Insect frass.

Gorilla Jealousy F1 is doing her thing. She is shifting into a bulking stage. She did show a major ph drop yesterday to today. She is likely due for a solution change. I will try to redo her solution this next week when I get a chance. Her smell has not really started up strong yet. I feel that will change over the next few weeks. Thank you Spider Farmer, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Easy trim✂️ As always first the top buds then after 7 days the lower buds✂️ The smell is divine citrus & ripe cherry super sweet🤤🍋🍒 Imagine if you mix a scoop of amarena & lemon sorbet gelato and you have the smell!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

8/17 everything going well. Have nice canopy. They plants are also stretching a lot. Got a pH soil tester and also test moisture so now when to water. Also got pH water tester. 8/20. Buds starting to form on every plant but one. Found my PH of soil is high so trying to bring it down. 8/23 last day of week 7. I think everything going well. They have stretched about 5 inches. I have been listing few and moving around scrog and grow out. No discoloration or any real issues. Well see how goes. I not sure if did to much defloation.

Hello growers! Week 13 is here, a little cal mag issue but i’m On it 👌🏻 I had some issues with the night temperatures, but I have fixed that with a heater in my grow room. Thanks to the people that pointed out that would slow the growth of the girls. But yeah other than that the buds are mad frosty and smelling super dank, i’m Just waiting for them to fatten up now 👌🏻 Good growing everyone!

420Fastbuds Cinderella Auto Week 4 What up grow fam. Weekly update on these 2 wonderful ladies. This week I did introduce some nutes and the plants seem to respond amazing. Starting to see little pistols so guessing this will be the last week of veg before the transition into flower. All in all Happy Growing

For LIQUIDS & NUTES ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

Lacewings seemed to have mostly killed themselves by flying into hot light fixtures. I may have left the UV on which was smart of me :) Done very little to combat if anything but make a sea of carcasses, on the bright side its good nutrition for the soil. Made a concoction of ethanol 70%, equal parts water, and cayenne pepper with a couple of squirts of dish soap. Took around an hour of good scrubbing the entire canopy. Worked a lot more effectively and way cheaper. Scorched earth right now, but it seems to have wiped them out almost entirely very pleased. Attempted a "Fudge I Missed" for the topping. So just time to wait and see how it goes. Question? If I attached a plant to two separate pots but it was connected by rootzone, one has a pH of 7.5 ish the other has 4.5. Would the Intelligence of the plant able to dictate each pot separately to uptake the nutrients best suited to pH or would it still try to draw nitrogen from a pot with a pH where nitrogen struggles to uptake? Food for stoner thought experiments! Another was on my mind. What happens when a plant gets too much light? Well, it burns and curls up leaves. That's the heat radiation, let's remove excess heat, now what? I've always read it's just bad, or not good, but when I look for an explanation on a deeper level it's just bad and you shouldn't do it. So I did. How much can a cannabis plant absorb, 40 moles in a day, ok I'll give it 60 moles. 80 nothing bad ever happened. The answer, finally. Oh great........more questions........ Reactive oxygen species (ROS) are molecules capable of independent existence, containing at least one oxygen atom and one or more unpaired electrons. "Sunlight is the essential source of energy for most photosynthetic organisms, yet sunlight in excess of the organism’s photosynthetic capacity can generate reactive oxygen species (ROS) that lead to cellular damage. To avoid damage, plants respond to high light (HL) by activating photophysical pathways that safely convert excess energy to heat, which is known as nonphotochemical quenching (NPQ) (Rochaix, 2014). While NPQ allows for healthy growth, it also limits the overall photosynthetic efficiency under many conditions. If NPQ were optimized for biomass, yields would improve dramatically, potentially by up to 30% (Kromdijk et al., 2016; Zhu et al., 2010). However, critical information to guide optimization is still lacking, including the molecular origin of NPQ and the mechanism of regulation." What I found most interesting was research pointing out that pH is linked to this defense mechanism. The organism can better facilitate "quenching" when oversaturated with light in a low pH. Now I Know during photosynthesis plants naturally produce exudates (chemicals that are secreted through their roots). Do they have the ability to alter pH themselves using these excretions? Or is that done by the beneficial bacteria? If I can prevent reactive oxygen species from causing damage by "too much light". The extra water needed to keep this level of burn cooled though, I must learn to crawl before I can run. Reactive oxygen species (ROS) are key signaling molecules that enable cells to rapidly respond to different stimuli. In plants, ROS plays a crucial role in abiotic and biotic stress sensing, integration of different environmental signals, and activation of stress-response networks, thus contributing to the establishment of defense mechanisms and plant resilience. Recent advances in the study of ROS signaling in plants include the identification of ROS receptors and key regulatory hubs that connect ROS signaling with other important stress-response signal transduction pathways and hormones, as well as new roles for ROS in organelle-to-organelle and cell-to-cell signaling. Our understanding of how ROS are regulated in cells by balancing production, scavenging, and transport has also increased. In this Review, we discuss these promising developments and how they might be used to increase plant resilience to environmental stress. Temperature stress is one of the major abiotic stresses that adversely affect agricultural productivity worldwide. Temperatures beyond a plant's physiological optimum can trigger significant physiological and biochemical perturbations, reducing plant growth and tolerance to stress. Improving a plant's tolerance to these temperature fluctuations requires a deep understanding of its responses to environmental change. To adapt to temperature fluctuations, plants tailor their acclimatory signal transduction events, specifically, cellular redox state, that are governed by plant hormones, reactive oxygen species (ROS) regulatory systems, and other molecular components. The role of ROS in plants as important signaling molecules during stress acclimation has recently been established. Here, hormone-triggered ROS produced by NADPH oxidases, feedback regulation, and integrated signaling events during temperature stress activate stress-response pathways and induce acclimation or defense mechanisms. At the other extreme, excess ROS accumulation, following temperature-induced oxidative stress, can have negative consequences on plant growth and stress acclimation. The excessive ROS is regulated by the ROS scavenging system, which subsequently promotes plant tolerance. All these signaling events, including crosstalk between hormones and ROS, modify the plant's transcriptomic, metabolomic, and biochemical states and promote plant acclimation, tolerance, and survival. Here, we provide a comprehensive review of the ROS, hormones, and their joint role in shaping a plant's responses to high and low temperatures, and we conclude by outlining hormone/ROS-regulated plant-responsive strategies for developing stress-tolerant crops to combat temperature changes. Onward upward for now. Next! Adenosine triphosphate (ATP) is an energy-carrying molecule known as "the energy currency of life" or "the fuel of life," because it's the universal energy source for all living cells.1 Every living organism consists of cells that rely on ATP for their energy needs. ATP is made by converting the food we eat into energy. It's an essential building block for all life forms. Without ATP, cells wouldn't have the fuel or power to perform functions necessary to stay alive, and they would eventually die. All forms of life rely on ATP to do the things they must do to survive.2 ATP is made of a nitrogen base (adenine) and a sugar molecule (ribose), which create adenosine, plus three phosphate molecules. If adenosine only has one phosphate molecule, it’s called adenosine monophosphate (AMP). If it has two phosphates, it’s called adenosine diphosphate (ADP). Although adenosine is a fundamental part of ATP, when it comes to providing energy to a cell and fueling cellular processes, the phosphate molecules are what really matter. The most energy-loaded composition for adenosine is ATP, which has three phosphates.3 ATP was first discovered in the 1920s. In 1929, Karl Lohmann—a German chemist studying muscle contractions—isolated what we now call adenosine triphosphate in a laboratory. At the time, Lohmann called ATP by a different name. It wasn't until a decade later, in 1939, that Nobel Prize–-winner Fritz Lipmann established that ATP is the universal carrier of energy in all living cells and coined the term "energy-rich phosphate bonds."45 Lipmann focused on phosphate bonds as the key to ATP being the universal energy source for all living cells, because adenosine triphosphate releases energy when one of its three phosphate bonds breaks off to form ADP. ATP is a high-energy molecule with three phosphate bonds; ADP is low-energy with only two phosphate bonds. The Twos and Threes of ATP and ADP Adenosine triphosphate (ATP) becomes adenosine diphosphate (ADP) when one of its three phosphate molecules breaks free and releases energy (“tri” means “three,” while “di” means “two”). Conversely, ADP becomes ATP when a phosphate molecule is added. As part of an ongoing energy cycle, ADP is constantly recycled back into ATP.3 Much like a rechargeable battery with a fluctuating state of charge, ATP represents a fully charged battery, and ADP represents a "low-power mode." Every time a fully charged ATP molecule loses a phosphate bond, it becomes ADP; energy is released via the process of ATP becoming ADP. On the flip side, when a phosphate bond is added, ADP becomes ATP. When ADP becomes ATP, what was previously a low-charged energy adenosine molecule (ADP) becomes fully charged ATP. This energy-creation and energy-depletion cycle happens time and time again, much like your smartphone battery can be recharged countless times during its lifespan. The human body uses molecules held in the fats, proteins, and carbohydrates we eat or drink as sources of energy to make ATP. This happens through a process called hydrolysis . After food is digested, it's synthesized into glucose, which is a form of sugar. Glucose is the main source of fuel that our cells' mitochondria use to convert caloric energy from food into ATP, which is an energy form that can be used by cells. ATP is made via a process called cellular respiration that occurs in the mitochondria of a cell. Mitochondria are tiny subunits within a cell that specialize in extracting energy from the foods we eat and converting it into ATP. Mitochondria can convert glucose into ATP via two different types of cellular respiration: Aerobic (with oxygen) Anaerobic (without oxygen) Aerobic cellular respiration transforms glucose into ATP in a three-step process, as follows: Step 1: Glycolysis Step 2: The Krebs cycle (also called the citric acid cycle) Step 3: Electron transport chain During glycolysis, glucose (i.e., sugar) from food sources is broken down into pyruvate molecules. This is followed by the Krebs cycle, which is an aerobic process that uses oxygen to finish breaking down sugar and harnesses energy into electron carriers that fuel the synthesis of ATP. Lastly, the electron transport chain (ETC) pumps positively charged protons that drive ATP production throughout the mitochondria’s inner membrane.2 ATP can also be produced without oxygen (i.e., anaerobic), which is something plants, algae, and some bacteria do by converting the energy held in sunlight into energy that can be used by a cell via photosynthesis. Anaerobic exercise means that your body is working out "without oxygen." Anaerobic glycolysis occurs in human cells when there isn't enough oxygen available during an anaerobic workout. If no oxygen is present during cellular respiration, pyruvate can't enter the Krebs cycle and is oxidized into lactic acid. In the absence of oxygen, lactic acid fermentation makes ATP anaerobically. The burning sensation you feel in your muscles when you're huffing and puffing during anaerobic high-intensity interval training (HIIT) that maxes out your aerobic capacity or during a strenuous weight-lifting workout is lactic acid, which is used to make ATP via anaerobic glycolysis. During aerobic exercise, mitochondria have enough oxygen to make ATP aerobically. However, when you're out of breath and your cells don’t have enough oxygen to perform cellular respiration aerobically, the process can still happen anaerobically, but it creates a temporary burning sensation in your skeletal muscles. Why ATP Is So Important? ATP is essential for life and makes it possible for us to do the things we do. Without ATP, cells wouldn't be able to use the energy held in food to fuel cellular processes, and an organism couldn't stay alive. As a real-world example, when a car runs out of gas and is parked on the side of the road, the only thing that will make the car drivable again is putting some gasoline back in the tank. For all living cells, ATP is like the gas in a car's fuel tank. Without ATP, cells wouldn't have a source of usable energy, and the organism would die. Eating a well-balanced diet and staying hydrated should give your body all the resources it needs to produce plenty of ATP. Although some athletes may slightly improve their performance by taking supplements or ergonomic aids designed to increase ATP production, it's debatable that oral adenosine triphosphate supplementation actually increases energy. An average cell in the human body uses about 10 million ATP molecules per second and can recycle all of its ATP in less than a minute. Over 24 hours, the human body turns over its weight in ATP. You can last weeks without food. You can last days without water. You can last minutes without oxygen. You can last 16 seconds at most without ATP. Food amounts to one-third of ATP production within the human body.

Week 4 Report: White OG – Bigger Roots, Bigger Heights! 🌟 What a week for our White OG! 🌱 She’s had an epic milestone week with her first transplant into a larger pot and her first topping at node 7. Each step has been about preparing her for greatness, and she’s taken everything in stride. Let’s dive into the details of her journey this week and why these steps are so important for her development. The Transplant: New Home, New Opportunities 🌿 The first big move of the week was upgrading her from her small pot to a bigger pot with a perfect blend of soil and nutrients to fuel her next stage of growth. Soil Choice: PRO-MIX HP Mycorrhizae + Bacillus This premium soil mix is a grower’s best friend, designed to give plants a perfect foundation. Here’s why I chose it: • High Porosity (HP): Promotes excellent drainage and aeration, preventing overwatering and ensuring roots have access to oxygen. • Mycorrhizae: These beneficial fungi form a symbiotic relationship with the plant’s roots, increasing water and nutrient uptake while improving overall root health and vigor. • Bacillus Subtilis: A powerful beneficial bacterium that helps protect against soil pathogens, enhances nutrient absorption, and boosts overall plant resilience. This mix creates an optimal environment for strong, healthy roots to develop, setting the stage for explosive vegetative growth. Aptus Holland All-in-One Pellets: Nutrient Perfection To supercharge the soil, I incorporated Aptus Holland All-in-One Pellets into the mix. These pellets are a complete slow-release nutrient solution that ensures consistent feeding over time. • Key Benefits: • Long-lasting nutrient release (up to 2-3 months). • Contains macro and micronutrients essential for steady, balanced growth. • Supports microbial activity in the soil, further boosting nutrient availability. • Easy to use and prevents nutrient burn. By combining Pro-Mix HP with Aptus Pellets, she’s getting the best of both worlds: a thriving microbiome and consistent nutrition to fuel her development. The Topping: Encouraging Bushier Growth 🌱✂️ At the end of the week, I decided it was time for her first topping—a critical training technique to shape her growth structure. I chose to top her at node number 7, leaving a solid foundation for future growth. What Is Topping? Topping involves cutting off the plant’s main growing tip to encourage it to grow multiple main colas (branches). This redirects energy from vertical growth to lateral (side) growth, creating a bushier, more productive plant. Why Topping Matters: 1. Maximizes Yield: By encouraging more colas, the plant can produce more flowers during the flowering stage. 2. Improves Light Penetration: A bushier plant allows light to reach more leaves and nodes, improving overall growth. 3. Encourages Even Canopy: Topping helps create a flat, even canopy, which is ideal for maximizing light distribution. The timing of topping is crucial, and at node 7, she’s strong enough to handle the stress while still early enough to recover quickly and focus on lateral growth. Environment and Feeding Routine: Consistency Is Key 🌟 This week, the environment has stayed perfect for her needs: • Temperature: Warm and steady, promoting steady vegetative growth. • Humidity: Still high to support root development post-transplant. • Lighting: The Future of Grow (FOG) LED continues to shine now at 300 PPFD, delivering just the right intensity for compact, strong growth. Nutrient-wise, we stuck with the reliable Aptus Holland lineup: • Regulator (0.15 ml/L): Strengthening her structure and managing stress from the transplant and topping. • CalMag Boost (0.25 ml/L): Supporting chlorophyll production and preventing deficiencies. • All-in-One Liquid (1 ml/L): Providing her with balanced, immediate nutrients to complement the slow-release pellets. • Start Booster (0.25 ml/L): Encouraging her roots to keep pushing deeper and stronger. Looking Ahead: Building on a Strong Foundation Next week, I’ll be watching for her recovery from topping and monitoring how she adjusts to her new pot and nutrient-rich soil. I’m expecting explosive growth as she settles into her new environment and gets ready for the big stages ahead! Shoutouts and Love 💚 A massive thank you to everyone who makes this journey possible: • Seedsman Seeds for the amazing genetics—don’t forget to use the DOGDOCTOR 10% off discount code! • Aptus Holland for their unparalleled nutrient line. • Pro-Mix Soil for providing the perfect foundation for growth. • TrolMaster for precise environmental control. • Future of Grow LED for consistent, reliable lighting. • Cannakan for helping with germination. • And, of course, Grow Diaries, for giving us this incredible platform to share, learn, and grow together. To all the lovers, haters, followers, and the entire community—you’re the heartbeat of this journey. 💚 Let’s keep growing strong! Growers Love! 🌱✨ DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚