The Grow Awards 2026 🏆
Likes
Comments
Share
@TightNugs
Follow
Proper in flower now starting to feed steadily,loads of defoilation to keep me keen.All good 🤞🍁
Processing
Likes
17
Share
Likes
19
Share
@Paultemp
Follow
Hi all! 😊👊 Week 1 flower
Likes
20
Share
Week 5 At the beginning of the week I set up and tested auto-pot system for 2 plants using the same reservoir of feed water. All connections work fine with no leaks, the floats are free moving and work as intended, I have air pumping into the reservoir and all connections are good there as well. I used black tubing for the feed lines and placed towels over he reservoirs to block out light from the water in the system. After all checks were made, I placed the plants in the pots and turned the system on. At the end of the week I had 3 new nodes of growth since the last topping, so I topped for the third time (4 cuts this week on the 4 set from last week and also removed the lowest). I now have 8 colas set. Feed this week was 400ppm total before add-ins. I used 360ppm Veg concentrate mix (recipe week 2) and 40ppm Bloom concentrate mix (recipe above). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) to all feeds and ph balance this week was for 6.3. Next week will consist of training the colas to go where I want them to. I plan to train 6 to the outer ring and 2 to the inner ring. Once I have enough new growth I will set the tomato rings and possibly start wire training. Feed will increase in total ppm and bloom mix and I plan to reduce ph to the 5.8 range slowly, so about 6.1 this week and 5.9 next before flip on week 9.
Likes
8
Share
Likes
5
Share
@ertaverd
Follow
Empieza el adiestramiento! Corte apical en el brote central y defoliacion general😋
Likes
53
Share
@Roberts
Follow
Grand Daddy Purple autoflower is looking really good. She has not shown any pistils yet. I did a bunch of lst to her and defoliation to open her up for the stretching. Everything is looking good. She looks like she is gonna try to get good size in the small potter. Bigger the better. Thank you Medic Grow, and ILGM. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
14
Share
@Terpyboyz
Follow
Alright growmies 🍁🕺 week 6 of veg - girls are starting to get there Colour back into them now 🙌🏻2 girls have a bit off a potassium def but same strain so could be a sign(worst part about running multiple strains) that will clear up with the next few days. Little update on this weeks progress. Start cloning next, and repot will be on cards 👏🏻 light work 💪🏻
Likes
6
Share
After a few days the LST has an effect. They grow nice and bushy. Still trying to get some drain in these massive 12l pots. At the moment I’m watering every 3 days with 3,5l of nutrient solution. Still no drain. I also removed some leaves at the bottom and the big ones, so light can break through better. We’re working on it 🧙‍♂️✨ Edit: I flushed them today with 5 liters of pH neutral water and we finally had drain 💦 I also lollipoped and defoliated them so the Girl Scouts get a better light intake ☀️🌱✨ let’s see how they’ll do. I’ll change the light to 12/12 next Tuesday, when we start week 7. Happy flowering
Likes
14
Share
Made it 67 days before the chop. •••03/21/2020 After a 6 day hang I've trimmed and started to jar cure. Had a total flower weight of 85 grams. Over all I'm pleased. Will update with a smoke report in about 3 weeks.
Likes
31
Share
@forestgum
Follow
Its my first plant so I'm very excited, sometimes I'm just staring how they growing for an hour and it's making me very relaxed😅
Likes
13
Share
@DonKrika
Follow
Continue with the LST this week, I had a small problem when I was tying up the plant, one of the biggest fan leaves was cut, nothing bad, but still unnecessary DAY 45 - Water PH - 5.89 PPM- 576 Solution Temp - 21.8 Watering Volume - 3.1L DAY 48 - Nutes PH - 5.93 PPM- 1940 Solution Temp - 21 Watering Volume - 3L Foliar Spray PH - 5.96 PPM- 227 Solution Temp - 19.6 Watering Volume - 100 mL
Likes
1
Share
@TTerpz
Follow
Start of week two of flower Fed with nutrients 8/10 Fed with plain water 8/12 As of 8/15: 7 more days till lollipop and defoliation.. need to feed all 3 with nutrients TODAY!
Likes
7
Share
@refusing3
Follow
Day 48 flowering: removed small leaves and mini-buds from the bottom to the middle of the trunk. Watering volume week 12: day 43- 49 - 500 ml
Likes
4
Share
@Velk1
Follow
This thing was a monster will re run it now this weather is done! Really nice smell and easy to grow I’ll do a real update when this drys out
Likes
76
Share
Update Blütetag 45 Hey Leute, hier mal neue Bilder für euch! Leider sehen die Pflanzen langsam alle bisschen abgerockt aus, aber die Blüten find ich ganz ok. Hab die Woche nur Wasser gegeben und davon auch sehr wenig, hab mir n Messgerät zugelegt und würde mal behaupten ich hatte sie überwässert (Stony hatte mich noch davor gewarnt). Sonst ist nicht viel passiert ausser dass die Mädels heute nochmal einmalig meinen neuen Zaubertrunk probieren durften, dann weiss ich schonmal für den nächsten run ob das in Kombination so passt. Schönes Wochenende euch allen! 🤠💚
Likes
43
Share
@DevilsBud
Follow
Start of week 6 Hella jelly is on a roll and will be needing support soon cola's getting heavy and she looking so goddam good i can definitely recommend this strain to anybody that want some fuer visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Processing
Likes
8
Share
Well week 1 of flower first day 12.12 light schedule finally figured out how to make changes to heights and nutes on this sites diary, starts todayran into a slight problem with the jack herer seeds they had a rare over growth of inner follisge that developed after topping and within 4 days before going into today week 1 of flower to remove scrog net and re prune they seemed to react differently than other breeders same strain but no big deal cut netting off to avoid damaging during end of veg before plants Garrett to tall which I have the room for just not the extra time it would of taken so we are starting flower and will just grow wall to wall in this 48x48x80 tent
Likes
48
Share
SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.
Likes
9
Share
Chop time for the dry ice has came this girl got so fat even with the scrogg she fell over. When i cut her down and flipped her from the dirt was so heavy though wrist was gana break. Just like all my others i dont do wet weigh in. I dont do a wet trim so i can have that slowwwwww dry time. When flowers are dry and teimmed will do a weigh in. My dry prosses is slow trim fan leaves let hang in 60°f and 60% rh for 12 - 14 days then do a trim for smoke. This girl is amazing has a steong caryophyllene smell that overpowers everything! Very curious how that turns out. Buds are