Thx Creepy_Steeve for legendary tips

Hou_Stone My FullGas' had some problems. One was unable to remove the shell from the seed. I managed to remove the shell without damaging the seedling thanks to the help of Creepy_Steeve who gave me detailed explanations, a big thank you to him. Go see his diaries he's a boss. This plant is now growing very well. But I don't know why the second plant is no longer growing. it only has one pair of leaves while the other is already showing its 3rd, let's see how it evolves... ------------------------------------------------------------ Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 500ppm and i adjust the ph to around 6 Temperature: 22°C Humidity: 50%

Hou_Stone only one photo this week. The next one will be more provided. I replaced my 25w cfl bulb with my 250w HPS, my plants said 10x thank you. The plant in the center has only had one pair of leaves for 1 week. I thought she was dead but she's starting to grow back weird. -------------------------------------------------- ---------- Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 500ppm and I adjust the ph to around 6 Daytime temperature: 28°C Night temperature: 21°C Humidity: 50%

Hou_Stone Last week before I spend them in my 1m² tent. When the lamp comes on my humidifier is still on.It is essential because my HPS heats up too much and dries the air. I will receive a 300w led lamp next week :) ------------------------------------------- Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 550ppm and I adjust the ph to around 6 Daytime temperature: 26°C Night temperature: 21°C Humidity: 50%

Hou_Stone I want all my 9 plants to have 8 strong branches at the same height. For this I did a topping on day 26, Then I cut 1 layer of leaves per day until there was only 1 left and with this I started a main-lining on my 9 plants There will be a lot of branches to pull with strings... I hope everything goes well and I hope to have a big tasty harvest 😊 ------------------------------------------------------------------------------------------------------------ -Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8 -Daytime temperature: 25°C -Night temperature: 22°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite.

Hou_Stone I changed my tent this week, the lamp and the Mars Hydro extractor convinced me that it was good gear so I took the tent in + 😀 Pulling all the branches with ropes is way too much work... I think I'll just pull the 2 main branches down and add a scrog net next week ----------------------------------------------------------------------------- -Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8 -Daytime temperature: 29°C -Night temperature: 25°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite.

Hou_Stone This week i flush the roots with tap water ( PPM : 310 , PH : 7.5) after i add water with 0.7 grow powder and 0.1g of Booster PK+ to reach 720PPM and adjust PH to 5.8 ---------------------------------------------------- -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==

Hou_Stone Thanks to Creepy_Steeve for the legendary tips, in this diary he guided me to remove a shell that was stuck on a seedling, now it has become one of the biggest plants in the crop 💪🙏 Flowering begins.I did defoliation on the lower tiers on day 4 of flowering ------------------------------------------------ Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days -Daytime temperature: 27°C -Night temperature: 23°C -Humidity: 45-65% -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 2/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

Hou_Stone it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5. There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket ------------------------------------------------ -Daytime temperature: 24-29°C -Night temperature: 22-27°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==

Hou_Stone one of my FullGas is late from the beginning and even for flowering. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

Hou_Stone - Water: tap water at 300 PPM, I add 0.6g of Hybrid powder and 0.4g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 21-26°C -Night temperature: 21-23°C -Humidity: 55-80% :/ too high -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation 5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits https://www.mars-hydro.com/?acc=hou-stone

Hou_Stone —

Hou_Stone —

Hou_Stone Superb variety that I discovered, very tasty with sweet smell cheese and productive. I place it in my favorites, To be redone in a future culture Instagram : https://www.instagram.com/hou_stone420/ Very nice and simple grinder that i reccomand : https://shop.greenhouseseeds.nl/merchandise/hemp-grinder/