Excelente comienzo de semana. Se aplicó un nuevo producto y en unas horas estaré subiendo un video de las plantas 👌😌😏 🇦🇷💪

This was a fun week getting to germinate some new Seeds and strains from fast buds genetics for my legal cannabis garden. Things went smooth I'm excited to see them pop out of their seeds shells and say hello Happy growing

6.4.25: I watered with 2ltrs of dechlorinated water PH'd to 6.4 with the following nutrients;- ♡ 4ml Xpert Nutrients Cal-Mag amino acids ♡ .75g Ecothrive Biosys Total PPM 880. 6.4.25: FastBuds Mystery Seed #1: She has been topped twice and is looking pretty strong 💪 She has grown vertically, and leaves are always praying. Possibly too much light, so I have turned the dimmer down to about 90%. There are slight bleached tips on a couple of top leaves. I'm hoping to do the same LST with garden wire here very soon. Overall, the plant has nice big, fat leaves. Seemingly lush colour and vigorously growing since the double toppings. Very nice plant so far. 👌 I have made the fleece tabs, and attached them as on my Northern Lights plant. I have started LST using the wire shown in photos. As well as two of the LST clips. I watered beforehand with 2 litres PH'd to 6.5 with 1g Ecothrive Biosys. The plant is looking great. Nicely structured. I'm going to do my very best not to mess this up!! 🤞 Thanks for hanging out 🍃 ✌️ 💚 🙂

The tropicana cherry is a magnificent plant. Its stocky and stout with really great node space. I love how solid she is and i just see such a good foundation for stretch. A really explosive week of growth. I pushed PPFD up to 310umols. Dimmers are at 60% which is drawing 224w plus 18w of DRRB. I have alos started Emerson effect ... Another The Emerson effect is triggered by the simultaneous exposure of plants to light in the deep red and far-red spectra Deep Red 660 nm /Far-Red 700 nm . A bit of boring science that explains why you need both far red and deep red in order to trigger Emerson. The effect occurs because photosynthesis is driven by two distinct pigment systems working in series:Photosystem II (PSII): Absorbs energy most efficiently at shorter wavelengths (higher frequencies), like 680 nm (441 THz). Photosystem I (PSI): Absorbs energy most efficiently at longer wavelengths (lower frequencies), specifically 700 nm (428 THz). When you provide only the higher frequency (deep red), PSI becomes a bottleneck. When you provide only the lower frequency (far-red), PSII is not sufficiently excited to provide electrons. Providing both frequencies simultaneously allows both systems to work at peak efficiency, resulting in a rate of photosynthesis that is greater than the sum of the two lights used individually. To understand the Emerson Effect, think of photosynthesis not as a single engine, but as a two-stage assembly line. What is the Emerson Effect? Discovered by Robert Emerson in 1957, this phenomenon shows that plants perform photosynthesis much more efficiently when they are hit by two specific types of light at the same time: Deep Red (660 nm) and Far-Red (700+ nm). If you give a plant only Far-Red light, photosynthesis is very slow. If you give it only Deep Red, it's better but still limited. However, when you give it both at once, the total rate of photosynthesis is significantly higher than if you just added the two results together (1+1=3). What is Happening? (The "Assembly Line") Inside the plant's chloroplasts, there are two "workstations" called Photosystem II (PSII) and Photosystem I (PSI). They work in series, meaning the first one must pass "parts" to the second one. PSII (The First Station): This station is tuned to catch Deep Red light (660 nm). It harvests electrons from water. PSI (The Second Station): This station is tuned to catch Far-Red light (700 nm). It takes the electrons from the first station and uses them to create energy (ATP and NADPH). The Problem: If you only provide Deep Red light, the first station works fast, but the second station can't keep up because it isn't being "powered" efficiently by that specific frequency. This creates a traffic jam of electrons. The Solution: By adding Far-Red light, you power up the second station. It now "pulls" the electrons from the first station much faster, clearing the traffic jam and making the whole assembly line run at full speed. The Benefits for The Grow Because i am using the Biotabs water-only method, my plants already have a steady supply of organic nutrients. Implementing the Emerson Effect offers several distinct advantages: Increased Biomass: Because the "engine" is running faster, the plant produces more sugars and carbohydrates, leading to heavier fruits or flowers. Faster Finishing: Plants often reach maturity sooner because they have more surplus energy to complete their life cycle. Better Light Penetration: Far-Red light is very good at passing through the upper leaves. This "wakes up" the lower parts of the plant that would otherwise be shaded, allowing the whole plant to contribute to growth. Enhanced Secondary Metabolites: In many crops, this synergistic light can stimulate the production of terpenes and antioxidants, improving the "quality" (smell, taste, and potency) of the final harvest. The "Sunrise/Sunset" Trick I am using 4x Invisible sun Far red/Deep red bars,they use high-quality Samsung LH351H (660nm Deep Red) and specific Far-Red (730nm) diodes for 10–15 minutes at the start or end of the light cycle. This mimics the natural shift in light at sunrise and sunset, "waking up" the photosystems or signaling the plant to go into "sleep mode" faster, which can further optimize the flowering cycle. Enviromentally i am chasing a VPD of about 1,1kpa. My room seem to sit nicely at lights on at 24c with no real drama and a little help from a 220W greenhouse bar radiator. Its using abot 4kw/h a day atm because my room is attached to the side of my house and its been -5c.. I have had to add some humidity as its also very dry atm. Im aiming for RH of 65% with my 24c but it is more around the 62s.. VPD is crucial and is the focus for this grow for me. The autopots and Biotabs make it so easy ican really just focus on perfect enviroment. A VPD of 1.0–1.2 kPa provides enough "atmospheric pull" to move calcium and magnesium up from the roots, which is critical for the rapid cell division happening now.. Plants will be flipped on Saturday which is their week 5 as im a bit behind.. As this happens i will push PPFD upto 4-500umols. by week 2 of flower. Thats the plan anyway..

Week 10 - Second Week of Flowering 🌸 As week two of flowering begins, the garden’s growth is unstoppable! These ladies are thriving, stretching up while staying beautifully vibrant and green. Every inch of this tent is optimized—each plant is soaking up light, nutrients, and water precisely as they need, filling the room with energy. Room Conditions 🌡️ • Temperature: 27.3°C • Humidity: 62.6% • CO₂ Levels: 800 ppm • VPD: 1.36 kPa (excellent range for robust flowering) • Lighting Intensity: 818 PPFD Solution & Medium 💧 • Solution Temp: 21.5°C | TDS: 470 ppm | pH: 6.02 • Medium: Moisture 100% (recently dried to 67%), TDS 510 ppm, Temp 22.5°C The “dry-out” to 67% was a strategic move, helping boost nutrient uptake and root strength. Meanwhile, our slight increase in reds seems to be having the desired effect, nudging these ladies further along in the flowering process. Eye Safety & LED Lighting 🌞🕶️ With powerful LED systems like the ThinkGrow and ICL-300, eye protection is critical. LED grow lights emit high-intensity light across the full spectrum, including intense UV and infrared components that are not easily detected by the human eye. Long-term exposure without adequate protection can lead to eye strain, and in extreme cases, damage to vision. • Blue Light Hazard: LEDs often have elevated levels of blue light, which can harm the retina over time if proper precautions aren’t taken. • UV Protection: Even low doses of UV can accumulate and harm eyes, so grow glasses with UV protection are essential for any indoor gardener. Investing in quality grow room glasses can help protect from glare, UV, and infrared rays, making plant care safer and more comfortable. Lighting Enhancements: ICL-300 In-Depth 🔆 The ICL-300 is our newest addition, specifically designed for inner canopy illumination. This LED offers a targeted light boost under the canopy, enhancing flower growth in lower and shaded areas—ideal for maximizing yield and light efficiency. • Dual Spectrum Technology: The ICL-300 provides a custom spectrum designed to penetrate deeper into the plant canopy, promoting robust bud formation throughout. • Enhanced Light Distribution: With strategically positioned diodes, the ICL-300 reduces shadowing and balances light distribution to all parts of the plant. • Energy Efficiency & Heat Management: This light is designed to be energy-efficient, running cooler and reducing the risk of heat stress within the grow space. The inner canopy light gives the plants exactly what they need, particularly during the flower stage when bud sites deep in the canopy can benefit from more direct exposure. However, after noticing slight leaf burn on some plants, I’ll hold off a bit longer before fully integrating this light to ensure optimal adjustment. Looking Forward 🌟 As we continue dialing in conditions, it’s all about balance, precision, and taking proactive steps to optimize every aspect of the grow environment. We’ll keep a close watch on the canopy height, and next week, I’ll aim to fine-tune the light integration even further with the ICL-300. P.S. - ICL-300 and CO₂ Sensor 🌱 The TrolMaster CO₂ Sensor (MBS-S8) has been crucial for real-time CO₂ adjustments, ensuring the plants get exactly what they need without constant monitoring. Combined with the ICL-300’s spectrum flexibility, these tools make an unbeatable setup, allowing for nuanced control over plant growth and development. As always, a huge thanks to the Grow Fam for the tips, support, and enthusiasm! I’m excited to see what these next weeks will bring as these plants reach their full flowering potential. Stay tuned for more updates, and don’t forget: eye safety first, growers! 🌞🌿 Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Diese Woche war ich fünf Tage im Urlaub. In dieser Zeit musste Blumat seine Zuverlässigkeit beweisen. Das klappte problemlos – wie erwartet. Ist das System einmal richtig eingestellt, läuft es zuverlässig – solange der Tank regelmäßig nachgefüllt wird. Die Pflanze hat sich diese Woche um 16 cm gestreckt. Ich rechne noch mit etwas weiterem Stretch, aber nicht mehr viel. Insgesamt dürfte die Streckung am Ende bei etwa 100 % liegen. Die Blütenansätze haben sich diese Woche sehr gut entwickelt. Lollipopping an Tag 21 ist dennoch sinnvoll, denn schon jetzt sind viele Triebe zu sehen, die später nur kleine Popcorn-Buds bilden würden. Diese Woche wurde es deutlich wärmer, mit Spitzenwerten von 30 C° im Grow Room. Im Zelt stieg die Temperatur während einer Lichtphase entsprechend auf bis zu 32 C°. Die Pflanze hat das gut verkraftet. Da es in unserer Region bisher nicht geregnet hat, ist die Luftfeuchtigkeit noch niedrig. Mit den ersten Gewittern und Regenschauern dürfte sich das jedoch schnell ändern. Die Parameter in Woche 8: Controller Einstellung Tag: Temperatur und Luftfeuchtigkeit 24C°-26C°, 45% - 55% Controller Einstellung Nacht: Temperatur und Luftfeuchtigkeit 24C°-26C°, 45% - 55% Durchschnittliche Tagestemperatur: 30,4C° Durchschnittliche Nachttemperatur: 27,4C° Durchschnittliche Luftfeuchtigkeit Tag: 53,1% Durchschnittliche Luftfeuchtigkeit Nacht: 54,3% Durchschnittlicher VPD Tag: 1,6 Durchschnittlicher VPD Nacht: 1,3 Durchschnittliche Bodenfeuchtigkeit in Mbar: 114 LED Leistung: 40% = 120 Watt Beleuchtungsdauer: 12 Stunden Umluft: Stufe 2 oszillierend

Today I shortened all four plants by fimming. Let's see what will become of them. Day 32: I think they took it well. The new shoots are growing. Day 33: Today I actually had to repot. The roots came out from the bottom of the pots. Plant three is struggling as you can see. I hope it comes through well. Day 35: I think the plagron light mix is too heavily fertilized. The plants give me the impression of being over-fertilized. The purple color of the stems is a hint. Then I will rinse them tomorrow.

All feed is based in 5️⃣ litres for this update And our germ room.is our philzone 6️⃣0️⃣0️⃣w at 5️⃣0️⃣% pulls around 1️⃣1️⃣0️⃣ true watts will get a reading next run. Then in week 2️⃣ they go to tge big girl pit with tye super lumen

Grew a bit lol

Fin de croissance, début du cycle 12/12

best cannabis I ever grew and smoked. Others agree. This is a cup winner I would win with no competition. 3 months harvested, 90% consumed. Will run more genetics and future cross, backcross. Feels like energy drinks, positive, 100% youre high and lit, extreme ripped. Smell is slight citrus, this is very sweet tasting and smelling because of my methods of growing. Oozing sticky like an industrial adhesive. Daytime smoke, ripped no couchlock. For heavy daily smoker this is above your level of comprehension, good luck finishing 0.5g session. 10/10 all categories. 4 months after harvest video macro, this is what 40% looks like

2 weeks to flower in main tent. Red Hot May have had a little nute burn. Lighting is at 628 on Par meter. 78deg avg. Malt was accidentally super cropped. Healing from splitting her branch. Oozecake aka Judy is my prize now. She fought through some mold 1st week. Transplanted her with only 1 node. Then her 2nd transplant to 1 gallon she was stunted for a week.

Started her flip on 7-23. Full strength Success Transition feed, Acilamated Went a bit overboard on the pictures. But she wakes up at a different time. 🤘

Hey what’s up fellas ✌️ Week 2 of flowering, I have trim the legs by cutting all the small shoots in the bottom that won’t reach the canopy. And removing some few big fans leaves that are covering some lower shoots. I gave them a lil bit of nutrients during this week, last time was about 13 days ago. Just to support the stretch. Keeping an eye on the plants is the best way to know when to feed them. Lights are at max level now, all the ladies should have plenty enough space to grow without reaching the cooking zone. The Mars-Hydro led is just a bit lower and closer as it produces less heat. ✅New Growers Tips✅ ✅Trim your plants legs, don’t waste energy on the bottom popcorn buds. ✅Your plants are stretching, they need Nitrogen, stick to your Grow/Veg. nutrients ✅Always pop more seeds than expected to grow, look at the shitty plants in the middle between the 2 scrog in the video, those plants were germinated same day than the ones in the scrog... Keep the best phenotypes and put the shitty ones at the trash. That’s all for this week 😉 Stay tuned for the Jungle Show 😂👍 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)

What a major growth spurt this week! Must be loving her new pot and all the lights switched on! She grew 25cm this week! 10 inches! She is the tallest in the tent. But anyway, she is doing her thing this week. Nutrients this time are 20-20-20 NPK powdered fertiliser I'm trying this time around. About 12 grams mixed with 10L of water makes ~1000ppm. My clean water alone is ~300ppm of that. I do have a CO2 bag generator thing... It's not doing a lot though. My CO2 meter reads barely over 400ppm.........

Fastbuds has some great strains and this one has been one of my favourites .. The buds get compact and light green very good stuff.. the buds are going to be great and they are forming up very nice right now. THE WEEK BEFORE had frost was very rough on this girl but she is a survivor ..

week 5 when the thrips first showed themselves. I noticed them cuz some silver stains started appearing on some leaves. you can see them better under LED light. So, I sprayed Neem Oil all over the plant. I could notice that if you don't do it well, spraying and rubbing the leaves with a piece of cloth, the oil will also create some stains. 2nd topping. killed some thrips this week, they're cute and didn't seem to harm the plant seriously. Neem oil worked fine to control them. No other pests that I could notice + Defoliation + LST Flowermind (4ml + 0.5g)