The Grow Awards 2026 🏆
Likes
Comments
Share
@reirrac1
Follow
She’s been battling some strange P and Cal deficiencies for the last few days while thickening up, planning on taking a soil sample and flushing. Otherwise, she has been happy and healthy. Not really seeing a significant stress response from her. Feed pH 6.3, EC 1.9.
Likes
Comments
Share
@braxat420
Follow
It's week four of flower, and my humidifier is busted. I can't afford to replace it right now so she's stressing. And by she I mean the two clones and then I popped the mom in the same pot due to space constraints. They seem to be doing well despite the dead of winter in Michigan humidity.
Likes
2
Share
Popped in 5 only 1 popped out. Very disappointed but excited to see the one grow. Thinking I may have popped in the soil prematurely.
Likes
25
Share
Well this week I had to give the girls a fairly big trim they were beautifully bushy but they were struggling for space so I cut back the heavy shade leaves that were covering bud sites I am also adding bloom to there feed from now but they are doing really well and the smell in the tent is devine. 💚🙏🌱🙏💚🙏🌱🙏💚
Likes
1
Share
easy germination with paper towel
Likes
14
Share
Long time extractor, first time growing (both s/o and myself). Already starting the next grow. This was one plant/pheno in a 4x4 sharing a 600w light @ 75% or less the entire time. Only tracking ONE PLANT this harvest but for reference - we pulled just over a lb dry weight total from all 4. End dry weight - Buds: 104 grams - Sugar Trim - 35 grams End flower rosin - 14.5 grams (1st press) - 1.2 grams (2nd press) [Press 96 grams] ~15% yield (not great but expected from autoflower) Chopped a little earlier than desired (10/70/20 amber/cloudy/clear profile) due to a scare of a nanner. Being new growers, we recently learned we could have plucked the nanner off and let it flower another couple weeks. Dried branches at 65-70f/55-60rh for 7 days then stored in grove bags until pressed in 37u micron bag, ~180f, 2.5min.
Likes
14
Share
Likes
152
Share
@EBxAH
Follow
Well, I made it through another week, lol. Just your typical boring week. The weather is cooling down now and the humidity has been decent. Another great transition week. Week 14 and 4th week of flower starts today, 9/5. There's this one cola on Bruce that's really scratching my brain to bend over, lol. They're all looking great though, still responding well to the Schwazz! Time to apply some booster and hopefully watch them fatten up from here on our. I'm actually quite impressed with most of the clones, they should fill out nicely! That's pretty much it. Feeling good, feeling good 😁 Happy growing everyone ✌️🍀✌️ UPDATE: 9/8 I uploaded a video and everything is looking good. I started some booster for the clones and next feed for the mothers I'll do the same. The flowers are finally starting to grow with copious amounts of pistols!!! Only a slight smell during the day but definitely stronger at night. I'm still very excited and very fortunate to have gotten this far 🙏 Happy growing everyone ✌️🍀✌️
Likes
12
Share
Gracias al equipo de AnesiaSeeds, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Coco Jambo: Con una composición genética 60% Sativa y 40% Indica, Coco Jambo es tu billete dorado a un verano sin fin, ofreciéndote una escapada a un mundo donde el sol nunca se pone en tu felicidad. Con unos niveles de THC que oscilan entre un relajante 30% y un estimulante 34%, Coco Jambo es un faro de euforia que guía a sus usuarios en un viaje a través de olas de serenidad y vibrante alegría. Su aroma es una celebración de los sentidos; imagina el momento de euforia al abrir un coco y descubrir que rebosa de las frutas tropicales más suculentas. 🌻🚀 Consigue aqui tus semillas: https://anesiaseeds.com/es/product/coco-jambo/ 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 📆 Semana 6: Esta semana ha explotado 💣, los cogollos comienzan a tomar densidad y llenarse de resina, me hubiera gustado aplicar algo mas de nutrientes en la fase vegetativa, la próxima vez será.
Likes
3
Share
Processing
Likes
7
Share
SUNDAY 4/21: I fed them about 1/3 gallon each today. Switched to Beastie Bloomz and increased terpinator. I inspected them for nanners and found none today. Will take some photos tomorrow- MONDAY: Too busy to spend much time with them today. TUESDAY: I rearranged and took some photos today. There are 2 of them in the small tent and one in the big tent. WEDNESDAY: I watered the one in the big tent and took some photos and a video. Will water the ones int he small tent tomorrow. THURSDAY: I watered with about 1/3 gallon and included some terpinator, calimagic, and beastie bloomz. I did a bunch of training on them to get some separation and better light penetration into the lower flowers FRIDAY: I did some more training on them today and I made some improvements to my fresh air a/c intake in the tent that dropped the temp a couple of degrees, and the new dehumidifier is keeping the RH right where I want it..45-50%.👌 This allows the evap cooler to be more effective at cooling as well...above 50% RH and it's basically just a fan..
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen
Likes
21
Share
@BruWeed
Follow
Esta planta estuvo dos semanas en etapa de enraizamiento, tres en crecimiento y ocho semanas en floración. No tuvo ningún problema con nada, me resultó de fácil cultivo. En esta cosecha obtuve ciento cuarenta y siete g en total. Utilice una maceta Root House de 10L. El sustracto que utilice fue de Nube Verde, en su composición se incluye turba de categoría, perlita, humus, compost, tierra, dolomita y vermiculita. Sin duda volvería a probar esta genética otra vez, supero mis expectativas.
Likes
10
Share
Likes
41
Share
@Fatnastyz
Follow
Week 2 of flower 12-5 She is growing nicely. She got a good dose of microbes yesterday. 2k ml she got cal/mag 5ml per gal, Drops 1ml, dusting of yucca, Kelp 1/16th tsp, EM 1 1 ounce per gallon and 1/2 tsp recharge. Top dress is soon. She will only get water x2 waterings. 12-7 2.5 liters plain water ph 6.2 removed any leaf pointing inwards. Fully watered love it. Doing great. Hope not to touch a leaf for a week. Fat chance, but heres for hoping 🤞 12-10 Removed some leafs 12-11 Looks like water tomorrow.
Likes
14
Share
Pedir perdón a todos chic@s por no poder realizar el seguimiento bien por covid-19...pero estamos ya de vuelta
Likes
1
Share
@dillande3
Follow
Day 17 Seedlings 11/02/23 - week 2
Likes
1
Share
@TTerpz
Follow
Start of week 6 7/25/25 Fed with nutrients: 7/30/25 Fed with water 8/1/25
Likes
6
Share