Un hobby que demanda mucho tiempo, hago lo que puedo con los horarios, espero disfruten este crecimiento de las hermosas presentes. Primera semana de Floración, espero las raíces dejen de crecer, no tengo contemplado hacer un cambio de macetas 😬 Riego cada 2 días, para ser invierno toman mucha agua 2L. por maceta 6.3 ph.

D-70 : Chaco Haze. They just look amazing, even 1/4 is very small (about 40cm). At this stage she should be 60 or 70 cm high... Anyway, the flowers are doing great. I really hope the will continue to grow. I dream of a grow room full of flowers between 1 and 1.4 m high ! Still 8-9 weeks to go, so they have time :)

Bisher noch die kleinsten Buds, dafür aber ein toller süß-zitroniger Duft. Alle haben auch etwas mit Nährstoffproblemen zu kämpfen. Ich gehe von einem Stickstoffproblem aus, wahrscheinlich ausgelöst durch meinen PH Wert von 7, da ich Anfang mein Leitungswasser nicht gefiltert habe. Ich habe nähmlich eine Gesamthärte von 5,7 gehabt und die Karbonhärte davon betrug 5,2

D15/V11 - 15/04/23 - Added water and nutes EC 0,7 pH 6.4 D16/V12 - 16/04/23 - Nothing D17/V13 - 17/04/23 - Nothing D18/V14 - 18/04/23 - Added water and nutes D19/V15 - 19/04/23 - Nothing D20/V16 - 20/04/23 - Added water and pH+ D21/V17 - 21/04/23 - Nothing

Flush

Last days in veg. I did the final defoliation before flipping to bloom. I’m really excited — the veg phase was super easy and a lot of fun with her. She’s definitely a training beast and constantly asking for nutrients.

Hoping that this week will not be a tennis match with my PH and my nutrient solution. Last week I saw my solution drop a full point in a matter of hours - consistently. I also ditched the PH up/down dosers crutch two grows ago, and I am not missing it as the intel is far better without them. IMO PH dosers do not give you real-time feeding feel from your plant - yet they adjust your PH to the "Perfect" level. Less is more in this craft, and in more ways than not. There is a balance between technology, automation, efficiency and most importantly - humans. If we removed the human element out of a grow, the product will be inferior, right? - trichome check showed mostly cloudy, with a few random amber if one looks hard enough. She’s ripening nice and reservoir running fairly normal for late flower. Wonder if that zero water filters-gone-bad caused my major PH crashes. Fed her KookBloom dry only this week and now in a 2 day flush. Should be about 10% amber.

First moldy spots found... 😬 Defoiliated the Moby some more for better airflow.. Hope, the next week's aren't too wet...

11/3 - Today is technically the first day of Week 5 and also the first day I could see a visible drop in her water level since her last check-in (~12 hours apart). As a result, her ppms shot up to around 800. I diluted the solution with straight tap (7.5pH, 170ppm) since her pH was registering around 5.3. This brought her up to 5.6pH and 670ppm (1.0ec + tap, 500ppm of nutrients). I would have liked to adjust her pH more, but the water level ended up at the bottom of the basket. I'll adjust further as necessary. The other day while attempting to LST her top branches, they ended up snapping off, so I just topped her down one node and broadened her other LST to make her as squat as possible. Once I am able to find a suitable individual ScrOG screen, I will put it on her. 11/4 - I wasn't even planning on doing an update today, but I want to note a few changes. The first of which is a visible difference between her foliage density in a span of 36 hours. Her root bundle is over a foot long and getting more wound up every day. I removed her LST ties in order to take advantage of the ScrOG screen apparatus (see notes below). After lights came back on, she measured 645ppm and had another notable drop in water level. Currently, I am preparing another nutrient solution that closely matches what she is feeding on now. I will be upgrading her to a 5 gallon bucket. I will be aiming for 1ec of nutrients/additives (500ppm + Tap on my meter, Hanna Primo .5 conversion). Tap measured 180ppm, so target ppm would be 680. Later that same day... So I finished upgrading her to a 5 gallon bucket before I actually got done writing the update. Added one photo showing new 5 gallon setup. Solo ScrOG test mk1 - In an attempt to do a ScrOG, but maintain control over each bucket, while still having relatively easy access to each reservoir, I decided to throw together this little contraption. I removed the lowest complete segment of a tomato cage, leaving a short "tail" beyond the lower ring to act as a peg to insert into corresponding holes in the lid. The lower ring is 10" in diameter and the upper is approximately 12" in diameter. Each ring is 11" apart. I would prefer to have a shorter segment, but I haven't worked out exactly how to do this yet. I would prefer to set the screen height at around 6" above the bucket instead of 11". This will have to suffice for the time being while I let my latent conscious work out a solution or one is provided by the community. Above each cage will sit a coated wire fence with grids measuring ~2"x3", as shown in the above picture. 11/5 - Uploaded short video showing Solo ScrOG Apparatus in place. Screen height currently set to 6". Thanks for stopping by my garden, and, as always, Happy Growing!

So for the very first time I trim a lot of green away- while this I got a scrimp while every single leave that I remove. Idk maybe I should remove some more the plant already recovered be me not haha All baby are at flower now but I f..ed up and brocke the main while lst…it’s my first grow so I take it easy and will see what will be at harvest day. Think about to take another tent looks to small for they’ll all. Didn’t thought they get this big

Fatto leggera defogliazione giorno 45.Tra qualche giorno giro a 12/12 👍🖐️

i was surprised that she was done on 2/15/25 spidermites had completely taken over one bud so i decided to check trichomes and she seemed ready.

Wow she's looking beautiful this week!!!!!!! Trichomes mostly milky/clear. I'm thinking one more week, the last AutoGlueBerry I grew I started harvest on week 13.

Quick update I know I been MIA..diary label xmas tree got deleted after losing the mother tree(die back)and about 80 cutting(weather) 1 of the cutting which I took before from the mother that died is the mother to set 1 and 2 (29)...took some cutting off of set 1 (30) jus waiting to see how rooting goes...mother tree jus hit the 2nd week of flowering will update with pic in week 2

We in Finish . Full tent And smell like crazzyy. I'm not much Writter as u see 😆

hey growmies I decided to switch to flowering, I am using ADV nutes with the dosage recommended by them and they seem to me in great shape, tonight I will do a defoliation in order to breathe better and get as much light as possible. I'll keep you up-to-date. good growth and happy day 💚🌳

This week I transplanted them into moist, inoculated soil that I had matured for 40 days, so I didn't water them this week. The soil hasn't dried out yet. I put mycorrhizae in the transplant hole. Next week my oil heater will arrive to raise the temperature a bit in the dark, because there were days when it reached 14°C. I noticed some leaves looked wrinkled; I believe it's because the soil is cold and I'm feeding them 300 ppfd. But otherwise, it's growing, just slower.

January, 24th. We are entering Week 4 of Vegetation After i started to feed them . Girls look very good. Leaves are sprouting, and they look quite happy. The Temperatures are quite cold for the Ladies. Its only 18 degree. But in this case its very good. Because the Cold slows down the Metabolism of the Plants Thanks again to @Silky_Smooth, for beeing into that EGGHUNT That means, you grow with only 50 g of Soil. In my case its only 25 grams in the Sheeps, and its challenging , but i learn a lot

After the disaster with germinating the expert seeds Gorrillas, I was a bit disheartened, was so looking forward to them. But we just follow up strong by planting a Dutch Passion Skywalker Haze instead. Will be starting that diary this week, lets hope she germinates. And it looks like we might be lucky, one tiny seedling came up from the 5 expert seeds, looks like a bit of a runt now and doesnt grow as fast as the Dutch Passion Orange Hill Special. I wil put another Orange Hill in the tent if this doesnt work out. Last week was a hot week and rising temperatures inside and out of the tent, I decided to to remove the driver from the SP-3000 and put it outside of the tent. This light looks even sleeker and sexier this way. Also a dream to deinstall, 5 minutes. But my victory last week was my invention of my custom top down oscillating fan. Which comprises of a standing oscillating towerfan, hung horizontal by just making a little hole in the foot and hanging it sideways. It works like a charm. The tower has optional oscillation so I can choose to just cool the light or sway through the entire tent. Very happy with that and still very happy with the light by @MarsHydroLED, thanks so much. Dont forget their End of Summer Sale: https://www.aliexpress.com/store/911997108/ huge discounts at the moment if you are in the market for a tent or a light!