Few days ago I refreshed the soil with compost and humus and that’s it

Week 5 and I expected the flowering begins soon. But it's around the corner for sure!

God's Vagina seedling seems to have finally established its roots and begun to thrive. The clone was yellowing I belive from being root bound. She was transplanted today 04/27. End of the week update! 05/03/2020 God's Vagina was topped at the 5th node yesterday(05/02) First time ever topping but she seems to be recovering nicely. Will begin with low stress training on the clone soon in an attempt to keep both plants at roughly the same height. Yellowing on the clone is nearly all gone. Planning on keeping them in veg for another 6 weeks.

first week of full flower, plant is looking good. 2nd last foliar spray of the year yay! We are getting there. Should be 7 to 9 weeks from now depending on weather. I'd LOVE to see some rain.

Dia 20 (05/02) Han pasado 8 días desde el ultimo riego. El sustrato de PRO-MIX HP se encuentra esponjoso al tacto a pesar de que está seca la parte superior Riego 1 Litro H20 + Wholly Base 1,25 ml/l + Solid Green 0,5 ml/l + Rise Up 1 ml/l de Gen1:11 - pH 6,23 TDS 660 PPMs Día 22 (07/02) Vamos a probar a hacer este ciclo con LST Día 23 (08/02) A +24 horas la planta ha reaccionado muy bien al LST. Se han estirado las ramas inferiores y la rama apical se sigue estirando Día 25 (10/02) Sigo con ajustes de LST para abrir la canopia. La planta está reaccionando con mucho vigor 😍💥 Este día añado a la carpa el sistema TrolMaster TCS-1 Tent-X Día 26 (11/02). Riego 1 Litro H20 + Wholly Base 1,5 ml/l + Solid Green 0,75 ml/l + Rise Up 1,25 ml/l de Gen1:11 TDS 780 PPMs - pH 6,36 (mínimo ajuste con pH+ para subirlo desde 6,2) La planta avanza vigorosa. En una semana pasamos a 12/12 😁 Nutrients by Gen1:11 - www.genoneeleven.com Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae Controlled by TrolMaster TCS-1 Tent-X System Main Controller - https://www.trolmaster.com/Products/Details/TCS-1

Fine 4 settimana di flow procede tutto bene 2 LH2P mangiano di più rispetto le altre, alla fine le due ermafrodite dopo aver eliminato i rami con i fiori maschi non se ne sono più formati quindi ottimo ormai dovrei essere fuori pericolo ma continuo a controllare

5/8 Watered both with plain PH'd water yesterday. Both of the plants are sucking up leaves. Trichomes are only really looking amber on the brown leaves, but otherwise milky.

Diary Legend: 💧- Watered 🌱- Seedling 🌲- Cut Down 🍃- Defoliation ✂️- Topping or FIM'ING 🚂- Training (LST) 💩- Fertilized Wk4 11/17/21: Day 22. 🚂The plant had to be readjusted already, so I moved the staple further out, the keep the tip bent over. I will begin training of the lower branches very soon. Two bottom ones out to the back, along with the next row. That way it will be growing the opposite direction of the main colas, and allowing more branches to grow into bud. Deciding to train was a great idea, as the lower shoots had grown quite a bit since yesterday. With only 3 more weeks left before flowering, maintaining the plants shape should be easily achieved. Love the dark green colour of the leaves. While many would say there is too much nitrogen, I think it's just fine. No issues with the leaves, everything looks normal. 11/19/21: Day 24. 💧Plant is growing well, minus the distinct leaf burns on the tips. The soil is only holding a slightly higher ratio of nutrients, but it is now the full recommended dose. Overall it's still in quite good condition. One thing I love, is how I messed up the FIM, and allowed the two new shoots to grow, while somehow still having the center shoots still grow. Albeit it's a little smaller, as it look longer to sprout, but it's definitely there. Not sure if it's 3, or 4 shoots now. I will spread the two long ones out a little at first, but then I'll let them all grow out together, like a pronged spear. Watered the plant fairly thoroughly, as it was definitely asking for a drink. 11/21/21: Day 26. Plant is looking great. Lower branches are being tied back and out, to allow for an even spread. About another week of the main stem being trained, with the final week being allowed to grown out and up. I still want it it be the main cola, as it would be nice to see what the colas end up looking like. 11/23/21: Day 28. 💧After a bunch of fiddling around with an idea for the plant, I went back to how it was, using staples. I spread the new growth on the top colas, allowing more light to reach the middle shoot. Just a few more days before I let it start growing out more, and then flip over to flower. I will water the plants after dinner, as I forgot to yesterday, and up until just now (3:54pm). They were fine earlier, so it's nothing to be worried about.

The living soil I’m using is a bit strong, so I made a cup size hole and filled with just soil and worm castings to plant the seed

The flowering continues, only on one branch I went wrong I think the bud will not grow .. The girls are suffering from N deficiency (?) Or from continuous changes of Ph (?) Who is more experienced tell me .. Hope flowering finish well, I add some N. Besides, the heat is advancing and the temperatures in the grow are rising a lot, fucking summer

06/03/19 - unfortunately this was my own fault for being gullible with a mix of just not thinking, but I got a cal deficiency on my OG which was fitting seeing as everything was going well, but I think I have resolved the problem as I’m not see the new growth being affected but I do think it has slowed down in growth abit but I’m guessing that’s understandable, I’m really happy I’ve turned to mills as I can tell a difference from my previous grows, this slight hiccup was my fault but they were that healthy I’m almost positive it’s gonna spring right back 🤞🏻 09/03/19 - definitely looks like it stopped growing for awhile as the gelatos are a hell of a lot bigger now compare to my OG but I think the problems been solved as their was only a little progression on some of the newer leaves but the newest set of leaves seem unharmed includeding the side branches. 12/03/19 - a lot smaller than the gelatos but never the less I’ve started the LST/leaf braiding with the OG aswell to make sure the side branches catch up as they were stunted from the cal mag def

Another week almost over, the girls are beautiful and smell great. Apparently everything is under control, I'm really looking forward to the results. Happy growing! 🌱🌱🌱

COMING SOON!!! FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA PROMO CODE: rocknroll https://growdiaries.com/diaries/112437-grow-journal-by-rock-n-roll-randy/week/593118 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍

👉The time finally arrived for the harvest, mostly cloudy trichomes with scant few amber, very few white pistols, and the leaves had either faded or were fading. The run-off pH would quickly plummet and the run-off EC would spike. This may be an indicator that the plant is ready but that only would be conjecture on my part. The overall look of the plant to me said it was ready. The aroma was super strong citrusy and intoxicating. THe leaves were fading and there were virtually no white pistols. 👉I harvested bottom to top. I hung each cola on alphabetized clothes pins with gardening wire attached for hanging on the rack. The buds are dense and shaped like pine cones. I trimmed it semi-tight, but left some of the smaller frosty sugar leaves. The buds and sugar leaves are very frosty but it wasn’t as scissor freezing as the Gorrila Glue I grew last year. I measured the post trim wet weight on a self-calibrating digital scale. I checked the accuracy of the scale with a set of scale calibration weights and it was accurate at all weight ranges. I logged each colas trimmed wet weight and hung on the rack. I have a 42” tower fan. For first 12 hours I ran it at its medium setting, then reduced to lowest speed. I rotated the side facing the fan after 24hrs. Then after another 24 hrs I placed them in paper sacks with to top open. I left the buds on the clothes pin hanger and clipped the bag to that. After another 24 hours I closed the tops. Another 24 hrs and I test weighed a couple of colas. I monitored for another couple of days until the weights averaged 20-25% reduced from the initial wet weight. I then cataloged the weight of each cola and placed each into its own jar, most got one of those small cheap hygrometers. These hygrometers have been calibration tested and I know the drift of each. My target humidity is 62%. I would open the jars for brief periods of time during the next couple of days until the humidity stabilized at 62%. Once stable I placed 62% humidity packs in the jars. I took out most of the hygrometers for the next plants cure, but leave some of them with the best buds. The Queen cola was 20g when placed in the jar. That is about 24% remaining weight from trim. 24% is a little on the high side of the humidity target range. The jar the Queen cola is in, is a wide mouth counter jar and I will be toking that bud primarily and it will dry out the fastest. I have compensated the weight I entered on the dry weight spec to reflect about 20g more of humidity loss and another 30 for the stems that are left on the bigger buds. The final weight of the buds going into the jars was 254g (not including the larf at 23gdry). 200g of plump sticky pine cones for the final weight is pretty nice for a 1 gallon pot. 👉I wrote this review at 3 weeks before the 6 week cure mark. In my short experience of being weed rich, its been interesting to take note of how the flower continues to ‘cure’ as time goes on. I have found that 6 weeks isn’t a given for when its ‘cured’. I have observed that as weed ages it changes. I have not noticed much difference with 2-3 week old buds at 62% humidity when compared to 6 weeks from jarring. But I do notice significant difference around 6 months of age. The flavor is enhanced and the buzz is stronger. It maintains this level then 8-12 months it has leveled off and all strains are becoming more ‘couch lock’ inducing. My observations are not scientific by any means. This is just my 8th plant in the 2 years that cannabis became legal for home grow in my area. But I still have each of the plants and rotate which one I consume. 👉I loved growing this plant, and hopefully gained more knowledge. It fox-tailed a bit at the end. I think my frequent fertigation techniques contributed to most of the issues I had. I think I was a little too conservative with nutrient mix and irrigation volume and frequency. I used only 10% expanded clay pebbles in the coco mix as opposed to the standard 30%. This was slightly problematic at first before the roots filled the pot. Fertigation events would cause erosion and caution had to be taken around the seedling. I placed a layer of hyrdoton pebbles across the surface and the issue was solved. Once the pot was filled with roots it took 10+ minutes to give the plant 2L of solution. The pot was packed hard with roots. This may have been a contributing factor to some of the possible nutrient issues I had. I dont think the nutrient issues I saw had much impact on the final outcome. To get 200g from a 1 gallon pot is wonderful.

Day 48 flower about 10 -12 days to harvest

13.04.2025 wie ich schon mehrfach erwähnte die pflanze ist riesig, deshalb heute ein " ganzkörpervideo" der Dame😱😂 die buds schwellen, und ein paar Blätter werden gelb- ich würde sagen noch 3 Wochen? also irgendwas um den Dreh rum sie duftet sehr fruchtig, blumig- bisher noch ohne den typischen " überreifen" touch wir werden sehen.😘 heute gab es zusätzlich bio PK 5/8 , da die Lady echt riesig ist, und das gut vertragen kann bisher gab es nur die gelisteten Produkte xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Ich gehe mit der "Just Add Water"- Strategie von Biotabs- Zusätzlich nehme ich Green Senstation von Plagron bei jedem Gießen dazu Ds bedeutet ich mische alle Dünger und Pflanzenhilfstoffe in die Erde, und gieße dann nur noch mit Wasser. Das einzige, was man beachten muss ist ein niedriger EC in der Erde ( um die 1.2 -1.5)- sont wirde es den kleinen zu " heiß" ich nutze organische , torffreie Erde mit Holzkohleanteil und diversen additiven ( myco/ Bacterien etc.) und Zach habe ich " supersoil- Living soil" INFOS DES ZÜCHTERS Marke Zamnesia Seeds Eltern Gelato x Zkittlez x Ruderalis Genetik Auto Hybrid Blütentyp Autoflowering Blütezeit 9-10 wochen von der Saat bis zur Ernte THC 23% CBD Gering Innenhöhe 100cm Außenhöhe 120cm Ertrag Innenanbau Bis zu 500g/m² Ertrag Außenanbau Bis zu 150g/Pflanze Gattung Feminisiert Erhältlich Als Feminisierte Samen * Laut Züchter, wenn unter idealen Bedingungen angebaut

The end of the fourth week. Only 2,5 to 3 weeks to go, since this is the FAST version of Gelato 33 by Advanced seeds. Last week temps were better, so that was a lot better to manage. The smell is a different story. We are trying to combat it as we speak with a double filter which my friend still had from a previous grow. The ladies are performing, however, because this is a monstercrop with many budsites, none of them will be very big. We anticipate a lot of cutting come harvest time. The stickieness and smell (cookies, dough, herbs, spices, gingerbread, vanilla) promise a lot to make up for that hopefully!! The middle plant that seemed to go fastest, now looks like to have the hardest time flowering. Her more advanced stage of flowering as a bigger clone, made it harder for her to return to veg, which she never really did. This seems to make her want to rush to the finish, as she is already browning the pistils. Also these buds seem more flakey, popcorny. As if the many flowers and grapelike bundled growth was too much for her. I put the light a little closer, to help her fatten up in the time she is given. I never expected the two 'runts' to outperform the mighty middle clone, but hey seem to fatten up and age much more nicely. So for now, prelimenary tip: make sure all your plants are completely revegged before flowering and consider that faster flowering species might have some ruderalis ancestry that might siderail all your lighting intentions and remains in flower what ever the growers lighting schedule. So with at least two more weeks for the two outer plants, and well see how many for the middle one, we are going to make them as comfortable as possible the final push of this flowering. Thank you for following and see you next week!!

11/28 Into the first day of week 3 and the plants are really growing. The GC is far ahead of the other 2 while those 2 are on their own same pace. Beginning to super lightly LST the bigger GC so the light gets all over it. Been watering with nutes for the last week and the girls have taken kindly to it. I expect to be feeding a full gallon of water per week to each plant. This past week they took .5gal each over the course of 7 days with no signs of stress, deficiencies, etc. 11/30 Decided to top auto NL #2... the new growth seemed to be bunched up and hadn’t dropped in 2 days, not sure why. Since i have 2 of the NL this will be a fun experiment to see the difference in topping an auto vs not. Hoping it was the right call as NL#2 is growing super slowly anyway 12/2 Haven’t watered since Sunday. Believe I might have gone a little too hard to start the week and their growth slowed. Pots have dried out considerably and plants seem to be healthy with undroppy/twisted fan leaves. Also began germination on a Moby Dick auto in a red cup. Super soil arriving Friday, experimenting on differences between added bottle nutrients vs “feeding the soil” over the course of my first auto grow. 12/4 Plants responded very well to 24hr lights for past 2 days. Growing upwards and showing no sign of dropping, yellowing leaves, etc. NL 2 recovered very well from topping and now is producing 2 main colas instead of 1 like the other 2 plants. LST GC and NL1 to expose some undergrowth to light. Trying to yield as much as possible from this grow setup. Haven’t watered much, soil still most and nutrient rich