Growing strong💪 Stretch should begin soon. I'll be switching to bloom nutrients next week🌸 Doing some light defoliation daily just 2–3 leaves to keep those lower sites exposed🌿

Bloom W2 Fastbuds Mendofrost ❄️❄️ 12.6 Nährlösung 3L PH-WERT 6,5 mit Plagron Silic Rock, Power Roots, Power Buds und Sugar Royal, Alfa Boost All in one 15.6 Nährlösung 3L PH-WERT 6,5 mit Plagron Silic Rock, Power Roots, Power Buds, Sugar Royal und Green Sensation, Alfa Boost All in one 17.6 Morgen soll das Wetter sehr warm werden. Es werden noch mal 3L Nährlösung angemischt. PH-WERT 6,5 mit Plagron Silic Rock, Power Roots, Power Buds, Sugar Royal und Green Sensation, Alfa Boost All in one. Stretch scheint sich dem Ende zu neigen und die Buds werden immer dicker😎💚

Day 52-64 (Day 54) I’m going to thoroughly inspect each plant and remove bananas if found. So far it’s only been the one on #7 but I don’t want to take a chance. I’m also going to give a watering with some runoff. (Day 55) Can’t find anymore bananas but that one. I will probably find a few bag seeds but who knows. It’s way too late for pollen to really have effect anyway. These 5 plants finish nice and early compared to my other tent flipped on the same day. I would never take this strain 65+ days like last time. I would do 56-60 days next time I flower this strain (Day 58) Holy shit this tent is fading like crazy now. They are starting to show some beautiful autumn colors. #1 #5 and #7 are definitely done. #3 and #6 could use a little more time so I’ve decided to take them down on the 24th. I haven’t seen anymore bananas and the one that popped out on #7 has shriveled up and receded. (Day 63) I’m seeing what look like seed pods starting to form in some of the main colas on my picture perfect pheno. #7 is showing 3 or 4 little bananas too. All of the top buds are definitely done so I’m going to harvest as soon as the lights come on tomorrow. I’m going to give one last watering right now and then harvest. I’ve noticed that harvesting a watered plant will extend the dry time by a few days and that’s exactly what I’m looking for. A nice slow dry. Plants are being full plant hung + dry trimmed and tent is being kept at 60-65 degrees and 60-65% RH. Cutting everything down was a pain in the ass. I had to individually cut each square the scrog net so it wouldn’t contract and squish all the buds. I chopped down my other tent as well so I have no other plants in flower right now.

The smell of this plan is really starting to come around now it was really weak for a long time but now I'm getting a sweet sweet smell got a little worried but not doing good just took a little time maybe I'm just too impatient everybody's plants look great y'all have a good one

She has left the Sunset Sherberts behind, and deciced to take advantage of the nice and toasty environment. Jedi (her name) has finally broken through. Steady at 21.5-24 C. RH at 65-75% with Spider Farmer Huimidifier and Dehumidifier, shooting for VPD. (day 1) Let's quickly review the key new components I've planned to integrate or have already: Circulation Pump - Adding this to the 14L Mars Hydro reservoir will ensure even fresh, circulated-for-a-miniute-every-hour, batch of water (and later nutes) to the auto-drip system, maintaining optimal feeding for my plants when I am away, next week. Biobizz & BioTabs Supplements - These organic nutrient and microbial products will provide a comprehensive and balanced feeding regimen for my plants. Auto-Drain Potted Plant Stands - The wheeled, auto-draining stands will simplify watering and prevent any spills or overflows. Inkbird Humidity Controller - Pairing this with the Spider Farmer humidifier and dehumidifier will allow me to precisely maintain the ideal VPD (Vapor Pressure Deficit) levels. LST Clips, Trellis Net & Shelves - These will help me maximize my grow space and optimize the plant canopy for optimal light exposure. Pest Control Strips - An important preventative measure to stay ahead of any potential pest issues. Smart Soil Sensors - The Zigbee-enabled sensors will provide vital data on soil moisture, temperature, and more, which I can monitor remotely. Air Purifier/Ion Generator - Ensuring my grow environment has clean, high-quality air circulation. With all of these elements in place, combined with my existing setup and the automated control via the iGrow app, I'm truly creating a "hands-off" grow operation. (theoretically, with a bro, coming to phiscally check too)....The ability to monitor and adjust key parameters remotely while I'm away in Italy. Running on Sunrise/set mode(18/6) over the "seedling" scene, in iGrow app, keeping track of DLI and later on, the Adlites will come into play. Temp at 23.5 and RH is at 60%.

6/17: I am keeping things as is for the time being. The light is 20 inches from the plant at 350 PPFD on a 24 hour light schedule. Growth seems to be constant and picking up steam with tighter inter-nodal spacing at these settings. I plan to switch from the seedling light spectrum to a vegetative light spectrum once the second set of true leaves gets a bit more of its form. I will also change the light schedule from 24hr to 20/4. 6/19: Today marks the first day of the 20/4 light schedule using a vegetative light spectrum. All other conditions are the same. I'm still only spraying the soil once a day but feel by next week, I can up the feeding with a little calmag. We will see! 6/22: End of week two and things are looking great. I'm still a newb but I can see improvement in my strategy this grow. The plant is growing nicely and seems to be on a good pace. 6/21, I added in some calmag and upped the feeding amount. I also bumped my lighting up a bit too. I saw quick results as seen in the timelapse that day, as the leaves started to pray up. As of Sunday, all is well and so far this grow is exceeding my expectations! WEEK 2 AVG TEMP: 72.6F WEEK 2 AVG HUMIDITY: 74.3%

Very stable medium-sized strain. This plant has never been trimmed and didn't make lots of leaves, it has developed big dense buds with fast grow process!

Hello friends, All was almost good, I've found insect several days ago, I'm trying to found an issue. Stretch was really impressive, she's biggest each day, I've seen was a girl today, Stretch in progress, first pistil, See you next week, hope insect will be eradicated, Have a good smoke and grow.

This week it seems like they are starting to flower or getting ready to. Day 42 and they are smelling great. I’m super excited to see the difference in plant A and plant B. The runt seems to be bouncing back. After I did some LST it really started to take off.

Hey everyone at week 4 know and wow have these girls grown early this week I applied some LST and all took really well to say it was my first time trying this

Looking mint atm, some slight nutrient deficiency I think. Will use some sensi cal mag and see how they are. Defoilated again removing growth below main nodes to create good air flow and concentrate on big buds at the top. Can see some white hairs coming through , should be in flower now so time to lower humidity slightly and increase the light intensity. Can't wait to see them buds

Last week. 9 weeks have pass now 48h of darkeness and then chop chop..

Day 57) nothing Day 58 ) Fed ph”d recharged water, half a gallon Day 59) nothing Day 60) Fed calmag and bloom , lotta calmag cuz I see cal def Day 61) nothing Day 62) flush with 2 gallons of phd water Day 63)

The stretch is slowly coming to an end, and now it’s all about bud production!🌱 All three ladies are developing nicely without any noticeable deficiencies or issues so far. Mid to late in the week, I spotted the first trichomes starting to glisten – always an exciting moment! Next week I’ll start removing a few fan leaves to let more light through, but for now, they’re cruising along just fine. Let’s see how juicy these berries get! 🍓✨

Die gute scheint es eilig zu haben. Eigentlich ist sie erst zu Valentinstag ausgezählt. Aber gut. Es werden wohl nur um die 8 Wochen so wie sie jetzt schon glitzert.

Sehr guter strain. Sehr lecker und sehr schön

New week in supported marshydro grow FLOWERING TIME last run i did it under a TS-1000 But this time it will be under the amazing FC-4800 i am so excited to boost up everything and see what i can approve from last run 🤘🏻🤘🏻 Starting to put them in 12/12 schedule they have bin put in darkness for 12 hours and now hopefully let the flowering Begin fucking love this stage 🤘🏻😎🤘🏻 27/10/21 All plants Transplanted in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Have some ideas for my grow tent I have my plants on hard plastic pallet And i ordered plateau with ball bearing So i can turn my plants around with one spin 😎 basically a huge turntable wikiwki Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

2te Woche beginnt. Bisher läuft es glaube recht gut … Die kleinen wachsen brav … Habe mal 2 weitere Nutrients hinzugefügt und Versuche den VPD Wert irgendwie konstant zuhalten 🙈👍 Dank 4 Blumat Classic pro Topf reicht ab und zu bisschen sprühen aus dem Befeuchter… heute das erste mal die kleine Pflanze abgedeckt und ganz leicht von oben die trockene Erde mit den neuen Nutrients zusätzlich befeuchtet. Mal schauen was sie so bewirken …