Did some defoliation 3-4days earlyer 🤘🏾 looking good, no bugparty or any mold (yet)🤪 Waterd them with the good good n we out 🤘🏾

I started my LST she looks like she’s loving it. Weather is good nothing Over 80 degrees. Thanks for stopping by

My suspicions of some kind of infection with the plant on the right was confirmed this week and I learned a new word "fasciation"...it's all over the internet but i've never heard of this before now...the plant continues to look worse and worse no matter what i do, a few of the older clones are starting to do the same thing so i threw them all out...The plant on the left looks on track with maybe 2 1/2 weeks to go..

Starting Week 16 tonight and she managed to stretch another 5 cm over the last week.. The stretch is real, and the bud sites are coming along nicely. With a clean clean Reservoir, im looking forward to the week ahead as i expect to see some buds sites to start to fill out..

Segunda semana de floração, planta ok, amarras ok, fertilização aceita até o momento, plantas estão com um ótimo vigor, folhas com uma ótima coloração.

The royal crematic have some calmag deficit so i give biobizz calmag. The wedding cake looks and smels awesome, maybe 1 or 2 weeks and she is ready to harvest. Higher the sunlight evo from 60 to 80 % power.

Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....

Week 6 and they are still in the vegetation phase. Still growing it under 1 95w cfl 6500k. I really learned that leaving your plant in a small pot for too long can really stunt growth and slows down the whole process... It's growing pretty fast right now and every day i see how the plant is getting bigger. Did some LST to give new branches more light. Leave any tips :)

New grow attempt after 7 failure 😭 Wish me luck

Well well exciting times ahead my favourite time multiple buds sites appearing all over I'm so impressed with the new Mars hydro ts1000w the growth is amazing. I have to say this strain is the most smelliest I've grown very pungent cannot wait for the coming weeks to see these buds stacking some weight

Could have let her ripe a little longer and let lower buds fatten up more, but I've decided it's time now. Harvested on 09.Nov.2023-Day 70 This little plant produced a lot of nice Business just 70 days. I am very happy with Gorilla Cookies and will definetly grow it again. Thé plant loves LST and its highly recommended to increse thé yield. It felt like flower starts in week 3 but the plant continues to grow until like week 9 or 10..so high yield in short time is not just possible but likely.

Giorno 2 bene ragazzi ho già notato che le ragazze si stanno allungando, sono in forma e non vedo l'ora di vederle a fine settimana. Giorno 3 annaffiata con 2,5L di acqua Giorno 4 defogliazione e lollipop, dopo una settimana circa ho tolto la fasciatura dalla spaccatura del ramo centrale, che cambiamento!

Still no sign of flowering. Transplanted Novarine plant 2 into a 50-liters container. The spot is under a big shorea plant. Shorea is a South East Asian medicinal tree. This is minimum light spot in my yard. Hope she would flower. I choose plant 2 because I think plant 1 will stretch even further. Plant 1 was also moved to a shaded spot under an tree jasmin. This Millingtonia, Indian cork tree. I have sweet flowers all year round. People told me that dried tree jasmine flower mixed well with weed and is good for people with ashma and sinus. Kind of useless since why would asthmatic people even smoke? Plant 3 is my back up until I come up with a way to put her into flowers. Clone are doing nicely. And I am growing 3 clones from plant 1 and only one clone from plant 2. I’ll be donating the rest to friends with weight and blood sugar issues. By year end, I probable keep only one or two clones. One clone from bigger branch is growing just fine without any benefit form lighted grow box. Feeding plants with mid-level dose of cow manure tea and earth worm casting tea to keep leaves healthy. They should have been given a light dose of fertilizer. However, the flowering purslane are also eating and feeding soil microbes. Got my paws on triancontanol and brassinolide. Perhaps these will jolt Novarine THCV into flowering. Triacontanol won't dissolve in neither water nor alcohol. And it is emulsified with polysobate. Mixing of Triacontanol Triacontanol does not dissolve in polysorbate. It is rather emulsified. Means that it need to be melt and there need to be water added. My steps, 1) heated 70 grams of polysorbate in a big heat resistance glass cup. I used a beaker. Mix in 5 grams of triacontanol. And it does not melt. 2) Put in 100 cc of water and put in microwave. After the mix is boiled, triacontanol melt. There is foam. So a bigger cup and a spillage plate would prevent problem with my better half. 3) After heated, the mix is better. Then I added hot water from to make total 250 CC of solution. Then, the mix is clear. 4) Label the dose with pencil. This works better than labeling with ink. I use 5 cc at a time for my entire garden. 250 CC would last me 50 doses. No need to buy so much. This is cheap. Let’s see next week how effective they are.

2024-07-29 Show must go on. same for the Outdoor Tangerine SowF1 Fast. I can see signs of Flowers, so next week she will be officially into Floweringstate too. she stretched heavy and spreaded vertically like a folding Fan super structure. and the harvested Plant stands outdoors, too. i look if shes revegetating. she gets water and attention. BREEDER INFO Tangerine Snow F1 Fast Feminised is a 75% sativa, four-way cross of (Boost x Tangelo) with (Lavender x Power Plant). This Fast F1 hybrid is bred from Cali genetics and boasts great citrus terps, high resin production for extracts, high levels of THC, very good yields and excellent mould resistance. Tangerine Snow F1 Fast can be grown indoors as well as outdoors. Indoor flowering times are between 8 - 10 weeks while harvest time in northern latitudes is during September while in the southern hemisphere growers will be harvesting during March. Recommended climate regions are hot, dry, humid and warm. These are tall, semi-branched plants that grow in excess of 200cm and display a high degree of vigour with very good uniformity. In common with many other heavily sativa-dominant strains, Tangerine Snow F1 Fast offers excellent resistance to mould as well as to plant pests and diseases. The combination of citrus terps and plenty of resin makes thi a very good extract strain with the 'washing' method delivering very good yields of hash. The citrus terpene profile is reminiscent of mandarins and tangerines and also has sweet candy notes. THC production has been lab-verified at a strong 24% while CBD is low. The effect is uplifting and energising, perfect for use during the day and early evening.

Coming along.

So sorry I missed a week! We were gone on vacation and I couldn't get good connections 😕 I removed most of her LST ties because her branches have hardened up enough Ahsoka Is doing terrific!! Her buds are really staring to get dense and sticky. And her smell!! 🤭 is wonderful! I'll try to describe it when it matures a bit more. So Ahsoka should be within 2 weeks to finishing so we have switched to regular water to get her a good chance to flush properly 🤞 Big new on the tent! I upgraded to a 4x8 and added 4 3500k auto cobs from cobshop.net And an AC Infinity 6" TS fan which is silent and awesome! Stats: 4x8 tent 1gal water pitcher Fox farms happy frog soil Optic 8+ LED, 4x 3500k auto cobs Portable air conditioner Dehumidifier Durabreeze carbon filter 6" AC Infinity TS

Hi everyone! Today i installed the first of two scrog nets. I think about 2 weeks of vegetation are enough for the rest to reach the hight. I watering them 2 or 3 times the week about 2 ½l clear water.

I will answer any questions and accept sug