The Grow Awards 2026 🏆
Likes
Comments
Share
Vamos avanzando en la floración y en las 2 que van cogiendo ese tono morado empezaron a salir flores macho pienso que será por la genética las e inspeccionado bien y las demás no tienen nada hasta el momento, esperemos que todo vaya avanzando bien. Saludos!!
Processing
Likes
3
Share
Likes
4
Share
Really starting to fill out now. Dont know whether its the stronger light or dry ammendments but my ladies seem a lot frostier than my last run.
Likes
59
Share
~ AirCube Active Oxygen Ebb/Flow System sponsored by GrowAce, featuring Tropicana Cookies by FastBuds ~ Well guy's and gal's here we go again on another exciting Autoflower run together! This time will be different as I will be doing a 'Hydroponic' run utilizing the AirCube Active Oxygen Ebb/Flow System by GrowAce, who were kind enough to sponsor me for this run, so it should be interesting to see what results I get and have some fun along the way! •Let me first tell you about this 6 Pot Ebb/Flow system from GrowAce: "The AirCube system is the one and only Ebb & Flow grow system on the market that combines the benefits of air pruning with a fully automated Ebb+Flow system! With the AirCube's proprietary fabric pot in bucket design, this system is guaranteed to outgrow any other Ebb + Flow system on the market. The results speak for themselves- grow MASSIVE roots that result in MASSIVE fruits! Air Pruning- Air Pruning only happens with fabric pots. As the roots reach the fabric walls of the pot, they penetrate and grow into the breathable fabric. Once penetrated, the roots are exposed to air, which causes the tips of the root to dehydrate and naturally prune themselves. This natural pruning process forces the roots to grow tons of lateral fibrous feeder roots. This results in a plant that utilizes the entire root zone and fills the entire pot with tons of roots. These fibrous feeder roots are incredibly effective in uptaking water and nutrients, resulting in a plant that grows healthier and more vigorously! Oxygen Benefits- Without oxygen, nutrient absorption cannot occur. On a molecular level, oxygen is needed to transmit nutrients across the cell walls and into the roots of a plant. With the AirCube's proprietary bottom lifted draining design, the system actively draws all of the water out of the bucket pulls vital oxygen into the root zone. Maximum Versatility with Any Grow Medium: The AirCube System is the only system on the market that allows you to use any growing medium you like. Use coco coir, soil, peat moss, perlite, vermiculite, hydroton, rockwool or any other medium you wish! This system is the most versatile Ebb and Flow bucket system in today's hydroponics industry. Temperature Control- with the fabric pots constructed with highly porous polypropylene fabric, heat dissipates easily and effectively. Unlike standard plastic pots, heat isn't trapped in the root zone. Heat in standard plastic containers can reach temperatures of up to 125 degrees. When this type of heat is trapped and unable to escape, it can damage your plant's health and limit the potential of your harvest. Growing in the AirCube System, plant roots grow cooler, healthier, and more vigorous. Largest Pots in its Class- this system features 5 Gallon grow buckets, the largest pot size of any other ebb and flow hydroponic system in the market. Modular and Expandable- start with 6 grow buckets and expand up to 36 grow buckets with the optional 105 gallons PopTank reservoir!" For my medium and nutrients I decided to also switch things up from my regular Organic runs, going with Plagron Nutrients and Root Royale 70/30 Coco/Perlite. When filling the fabric pots with medium, I first added just under a gallon of horticulture perlite from Nor-Cal as a base layer to ensure good drainage and then filled the remainder with the Root Royale. •Now for the outstanding, award winning strain from my friends at FastBuds... Tropicana Cookies Auto: I'll be running Tropicana Cookies Autoflower which is a 60/40 Indica/Sativa Hybrid. "Tropicana Cookies Auto is the perfect variety for growers of all levels, especially beginners as this strain performs very well outdoors and indoors, and can produce up to 500 gr/m2 in 56-63 days without needing extra maintenance. Reaching up to 110 cm, this strain grows fairly tall with medium-sized branching, showing its mixed heritage. Definitely the right choice for those with a high tolerance looking to get their hands on the strongest autoflowers out there. You can expect an extremely powerful and long-lasting high that’ll boost your mood and give you that extra push you need to start your days on the right foot. This variety offers the whole range of citrus and woody flavors with a strong candy-sweet background that will keep you coming back for more and more."* *References: GrowAce.com, 2fast4buds.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •DL Wholesale Root Royale Coco Lite 70/30 coco/perlite •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 10/22- The Tropicana cookies are going into their third week of veg, and their fourth week since breaking ground. All three are looking great, with the #1 pheno having the darkest green coloration and super tight node spacing, and the #2 which is looking super healthy, with much wider node spacing. The #3's color is not yet where I'd like to see it, but it has been steadily improving over time. Their feedings of Plagron nutrients continue three times daily and I'm monitoring the reservoir before each, adjusting the nutrient level to 650-700ppm @ 5.9-6.2 ph. The tent environment has remained dialed in with the VPD averaging 1.40kpa over the last seven days. 10/24- Today I drained, cleaned and flushed the AirCube reservoir and 'brain bucket', then filled it with 70L of 74℉ well water. After filling I added the Plagron nutrients separately and also began adding in Plagron Royal Rush. The Tropicana Cookies are responding well to the feeding schedule, and are also tolerating the increased light output which I now have set to 80% along with setting the co2 levels to 1100-1400ppm. 10/26- The #1 pheno has some huge shade leaves that are blocking her side branches, and are an absolute bitch to keep tucked out of the way. I'm contemplating removing a few to allow the side branches more light so that they'll be able to grow out. Today I added 1/2 tsp. of Yucca Extract to the reservoir which will aid in feeding by acting as a surfactant, increasing the wetting ability of the solution. I am continuing the feedings of Plagron nutrients three times daily, and I'm monitoring the reservoir before each, adjusting the nutrient level to 650-700ppm @ 5.9-6.2 ph. The solution temperature is maintaining a steady 73-75℉. As a side note; as the weather gets colder I may install a heat mat, controlled by a thermostat, under the reservoir to ensure proper temp's in it. 10/28- There goes another week for the FastBuds Tropicana cookies and they're all shaping up to be beautiful cultivars, with some slight differences between them which makes the grow interesting! Our weather has warmed up the past couple of days. Because of this I've had to lower the light output to 55% in order to keep the tent temp's below 82℉. The Tropicana Cookies are showing zero sign of heat stress so I'm not terribly concerned, especially as the weather will be dramatically cooling off in a day or two. The #2 and #3 pheno's are showing signs of the beginning of flower, ans I went ahead and removed four of the huge shade leaves on the #1 as they were too big to tuck and blocked a ton of light from the side branches. Hopefully now the #1 will start to bush out with all the additional light reaching into the interior of the plant. I'm also continuing to tuck shade leaves daily on all three girls, and have been gently bending down their side branches as well. I upped the nutrient ppm level to 800 with the addition of Plagron's Royal Rush 8-0-0 which will continue in their feeding through flower. I'll also be adding Plagron Green Sensation in another 7-10 days which will also continue through flowering. I hope to see you next week... Growers Love!💚 💚 Thank you for checking out my passion in life! Please visit as often as you wish and I hope you enjoy this journey as much as I know I will! Grow what you love, Love what you grow!💚
Processing
Likes
2
Share
@TolaMcFly
Follow
Han empezado a tomar ritmo en general esta cepa la he visto y cultivado y siempre se demora en mostrar flores contundentes , va lento pero seguro , lo mejor que tiene es el efecto que verdaderamente se parece al lsd , no se que habrá hecho Barney’s farms con esta cepa pero es un efecto muy fuerte , adjunte unas flores de otro cultivo , esta semana defoliamos otra vez las hojas más nuevas , dándole pelea al frío que ya afuera alcanza temperaturas de 2º C , de noche la temperatura fructua demasiado las plantas están tomando tonos violáceos y se ven muy pero muy parejos todos los cogollos que se vienen.
Likes
10
Share
COSMOS F1 CBD ROYAL QUEEN SEEDS This lady was my first grow in a solo cup from start to finish so I was satisfied with the grow. Knowing she would flip about 5 weeks and growing in organic soil I knew she would not get that big. She still produced frosty dense buds and was about a foot tall. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU ROYAL QUEEEN SEEDS!! COSMOS F1 CBD/ROYAL QUEEN SEEDS
Likes
18
Share
Likes
44
Share
👉The plant hasn't gained much more height, but the buds have started to plump and frost. The aroma has also become strong and is an intoxicating creamy lemony scent. The frost is spreading onto the sugar leaves. The buds are going to be dense. I have only taken a few of the lower and most shaded leaves, and those leaves were starting easy to pluck as if the plant was done with them anyway. Its got purple stems and at the beginning of the week show potential early signs of magnesium deficiency. This can be due to the pure H2O I use and less mag in the solution than normal, so I added an extra measure of Calmag in the mix. I haven't seen any progression of purple veins or any other notable possible nutrient issues in the leaves. The plant is full of leaves and I have zero intention to remove anymore of the food factories until the plat tells me to. 👉I used week 8 "mid Bloom" nutrient mix from the General Hydroponics Flora Series Drain to waste feed chart. The run-off has stayed within the target. I did one low EC fertigation and one H20nly event, both followed by regular strength solution.Switching to the week 9 mix this week. 👉
Likes
5
Share
Likes
5
Share
#1 Has stretched up and out! If she continues to fatten as tight as the other two, she will probably be the one with the most weight. Her branches are the tallest and reaching up at least 4-6 inches past both her sisters. Her main cola has some light bleaching, nothing I can do about that, we’ll see how she wraps up. #2 is going to be a producer! She has so many tips and they are all fattening and developing at about the same rate, she is going to be a beast! Her main cola is rock hard. Did a defoliation on her, she is appreciating the extra light penetration 😎💨 #3 is fattening up! She never did stretch, but then again I had her tied and trained pretty far out. She has been thirsty, I have been feeding a dose close to 700 ppm every other feed which has been every 3rd day for her. During the lower feeds, ppm has been around 275. Her tricomes are mostly clear, with some cloudy starting to show. She has the longest to go, but us already dense, and will only get better.
Likes
9
Share
Got my ac😁😁😁...inkbirds will b here tomorro (humidity and my 2nd temp one) so it can b properly controlled. Gettn ready to give them a tea next week then just cruising to harvest. Like the dry amendment method but 2 soon to say for sure. Looks good tho. Ladies bugs still hangin out. Split another 500 between veg n flower room. Cant wait to get rid of the trellis for good ole tomato cages. Cant wait for this harvest.
Likes
6
Share
It’s ready! Can’t harvest till next week as I’m too busy.
Likes
6
Share
@Hashishi
Follow
Lemon tree strain is growing big for a seedling
Likes
2
Share
Likes
20
Share
@mrb11
Follow
I guess dude was right about it foxtailing but I don’t care and I don’t think I can do anything about anyway. My light is at 50%. She is only getting 600 ppfd and I’d have to check again but I know the DLI is under 30, I want to say it was 25 or 26. Temps never go above 76° lights on but typically stay at 74°. Idk if it is light stress then i don’t understand how ppl run these high wattage lights. Maybe I’ll try the co2 bottle again
Likes
1
Share
Trichomes are spreading out nicely and few pistols are changing colour whilst widening it’s structure am extremely impressed so far by the hey abbby420pro environment and the development of the auto flower compared to outside has massive noticeable upgrades/full control with a camera to check on the development without inter
Likes
22
Share
Total Days: 70 Flower: 31 Vege growth is stopped or very slow at this point. Might eke out another inch or two. I'll raise the lights as far as they can go soon (only 3-4" for the 650w light on right), but with the higher operating RH%, I've yet to see any pistil burn. The light cycle shift to accomodate the painters definitely stressed 2 plants. One was removed. The second i am retardedly going to keep. I stripped off lower weak buds that had the nanners. Pruned a few weak axilla, too. The nearby plant pistils are lily white, so it should be fine. The pistils will be changing color soon, so that will no longer be a good way to assess the risk going forward. Meh, I know it was caused by light stress, so any seeds not selfed I'll probably keep them. Overall, I'm relatively happy with development. Need to adjust some procedures in next cycle and maybe a few more tweaks in winter 2025-1. Second irrigation went well, but i did find a partially clogged emitter. Probably a plastic bit from hold-punching. With 8 emitters per pot, the overkill makes it irrelvant and the pot wasn't the slowest to finish. A few emitters has some roughly milled inlets. I'll inspect them all over the next couple weeks and replace some as needed. Just realized my new dehum was glowing in my tent the entire time. Luckily the display was facing away but now has a cardboard flap blocking it. If it was fine before, it's even safer now. Photons had to bounce of a wall and travel 5' before it could hit any plant. ----- Early update before end of week upday: So, I've been procrastinating replacing the irrigation setup. It's slowly gotten worse each year (3rd ongoing), but never had the dripper devolve into a dribble. I've been hand-watering 1 or 2 pots the last week or so. Replacing the mini sprinkler heads only fixed 1 of the problem-pots. Think the fittings are leaking on the one that did not improve. All the pvc is gone. All the 1/4" manifolds and tubing are gone. The per plant adjustable nonsense is the worst idea ever as all it does is cause pressure changes and endless tweaking of all the little sprinklers, because changing one impacts all the others, or a speck of dirt might cause a new imbalance that requires adjustments etc - Fucking nightmare of useless repetitive behaviour. Still have the 3/4" ID lead-in, heavy duty, 450psi graden hose with ball shut-off valve and pressure regulator. That is now connected to a 3/4" wye with two 1/2" irrigation tube adapters attached to each end. This forms a loop around the pots with a 1/2" tee per pot that leads to a gate shut-off valve and eight 2-gph pressure compensating emitters - 96 in total. Will do first test run on Sunday. The great thing is that this is all plug and play when I switch to injectors. That'll require some sort of pvc manifold and check valve at the utility tub, but otherwise just connect hose, and it's golden. That's the next step. I'll also re-incorporate the wifi-enabled solenoid valve at that point. Getting rid of the 55-gallon reservoir and pump would be nice. One less thing to maintain (rez) and less things that can break down (pump / powerhead). ------ Sunday Test Flawless first run. Time will tell if they are resistant to clogging, but optimistic at this point. 18psi operational pressure at the irrigation loop. Didn't even need the regulator. The mesh strainer at the pump intake doesn't have the typical, small air-bubble, so the last setup was letting a little air in. The last setup was fatally flawed. Pressure compensating emitters for the win. They didn't even squirt wildly as the air was expelled from empty tubing on first run. Took ~4mins or so. Some pots finished a bit sooner, but that's because they don't drink as much per 24 hours. I can live with that kind of waste. I'll get the timing down to reduce water usage even further. I don't need to wait for every pot to exhibit runoff as that is beyond 10% runoff needs. Might be able to get 4 fertigations before refilling reservoir instead of 3. We'll see. I don't like the minimum ~12-15 gallons sitting over night. It fouls the reservoir faster at low volumes. Anyway, super geeked. They better not clog easily, lol....
Likes
14
Share
@HinduGod
Follow
WOW LOOK AT DAT!!! DAT PLANT IS DOING VERY VERY GOOD!!! I HAVE BEEN DOING LST ON DAT PLANT EVERY DAY DIS PAST WEEK!!! DA SUN GOD CAME BACK DAT IS VERY VERY GOOD!!! PLANT IS RECEIVING AROUND .25 GALLONS OF WATER A DAY!!! IT ALSO HAD 4 FAN LEAVES REMOVED!!!!! PLEASE COME AGAIN!!!!!
Likes
59
Share
Week 6 of flower - At the end of this week I defoliated down to mostly bud and sugar leaves for the final stretch. I fed them normal with no HP2. Feed this week was 1.25 gallons two times with about 4 days between. 750ppm total before add-ins. I used 750ppm Bloom concentrate mix (recipe week 5). However, I also added 1ml/gal of CaliMagic (General Hydroponics 1-0-0) to all feeds. PH balance this week was 6.3. Next week I will add the HP2 back again while reducing the nutes for flush.