The Grow Awards 2026 🏆
Likes
Comments
Share
Processing
Likes
17
Share
Hey guys idk what’s going on my autos it seems as if the Gelato and Zkittlez has just stop growing completely I mean there’s no change at all the Zkittlez Og is starting to fill in forming nice little buds but my other autos seems like they had stop completely I know the lifespan on the Gelato is 76-80 days from seed to harvest The Zkittlez lifespan said the same 76-80 days from seed to harvest Zkittlez Og lifespan is 80-90 days from seed to harvest And I know I’m for sure March 9th marked the 60th day on all autos and I know I stress the hell out of them overwatered etc but it looks as if I might only have one plant to successfully make it yet this is my first grow and why I choose to do autos first to give me a little insight on what I’m doing but I’m going to let these girls go for a full 90 days before I decide to trash em and focus purely on my clone grows
Likes
12
Share
Still fighting a little bit of nutrient burn, went out an bought a blugardian all In one meter and going to go by E.C. instead of ppm. Took away a few of the big fan leaves blocking the lower sight. More tricombs forming all over the place. Let me know what you think, what I can change for next time or any other coments
Likes
26
Share
@CapeGrows
Follow
This week was about pushing in to full flower. I am more than happy with the size, reaching a meter in length and in width. The side shoots caught up beautifully with the main cola and we have a lot of bud sites with great spacing.
Likes
114
Share
@Natrona
Follow
RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea
Likes
8
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
59
Share
@Mastr
Follow
She so bushy bud are everywhere some off them can get really light I wish I was defoilated them but it's okay I let her grow till day 90 let see the result thanks for reading and looking into this diary happy growing I add bio heaven for bud denser recommend by grower friends 💚
Likes
92
Share
🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚
Likes
86
Share
ALRIGHTY THEN REMINDER I DO 2 UPDATES PER WEEK 👉WEEKLYROUNDUP👈👉MIDWEEKLY UPDATE👈 At this very moment , hint of Grape Crush Soda smells 😛 Which is awsome We just hit week 7 and all is well , for the most part , still having a little Cal/Mag issue but hopfully with some adjustments I got under control 😃 ....... Middle of last week I have decided to start with her little sister and started a little training by pulling her over to the side 👌 And will continue to LST this week👈 And she's also showing Cal/Mag problem but like her big sister I have made adjustments and hope that works she's already begun next faze by flowering 😲 They are so quick 👈 Baby Sister Plant #2 Is 5 weeks 35 days from seed rain water to be used entire growth👍 Lights being readjusted and chart updated .........👍 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉IF ANYONE IS LOOKING FOR A PLACE TO HANGOUT VIA GROWDIARIES AND TALK GROWING AND JUST CHILL AND WHATEVER .....👈 👉I CREATED GROWDIARIES DISCORD SERVER !!!!!!!!!!!👈 LINK IS 👉 https://discord.gg/zQmTHkbejs AND SEE HOW IT PLAYS OUT !!!!!!!
Processing
Likes
30
Share
@Canadian
Follow
Day 63 One of the Moby Dick it's not doing that great in fact since I stunt them early on she never came back very good either way it's not going to get that much as the other one unfortunately. but they seem to be maturing very fast I do not think they will pass the 12 week before being fully ready trichomes are already becoming some cloudy. The blue amnesia seems to be getting fatter everyday packing on weight and trichomes Thank you for reading and have a happy grow Day 67 the Moby Dicks seem to be doing very well one of the plans seems to be maturing a week or more faster meaning I might cut them down at different times depending on readiness of the trichomes the smell is still very sweet and fruity. the tallest of the Moby Dick grow to 40 inch the other one plant it is only 34 inch . The blue amnesia seems to be also doing very well the tallest of the plants is it is 46.5 in and the other plant reaches up to 45 in . currently I'm trying to lower the temperature of my tent during the 4 hours of night. That they are enjoying but it's not so easy to release all the Heat and try to lower the temperature to see some effect and color but I will continue to attempt this in order to have some awesome looking buds the only thing I have to have lots of care not lowering temperature too much and shocking my plants hurting the root system because of this and the four hours are a short period To achieve this it is very challenging I also noticed that the plants don't like any nitrogen at this point in flowering. Day 68 this is probably the last time I will feed the Moby Dicks from (16 liters total / 10 mililitros of Flora bloom. 5 mililitros liquid koolbloom. 6 mililitros Flora nectar and no nitrogen of any kind the plants don't seem to like it) here now I'm probably just going to do plain water at the right pH and maybe some of the cleaning product at the very end .from g hydroponic.Have a happy grow
Likes
69
Share
@nonick123
Follow
Día 80 (19/08) Riego 500 ml H2O pH 6,55 Día 81 (20/08) Riego 250 ml H2O pH 6,55 Día 82 (21/08) Riego 500 ml H2O pH 6,55 Día 83 (22/08) 💥Comienza la floración! 💥 No riego. Día nublado y de bajas temperaturas Día 84 (23/08) Riego 500 ml H2O pH 6,55 Día 85 (24/08) No riego. Día nublado y de bajas temperaturas Día 86 (25/08) Riego con 1 Litro de Té Floración de Lurpe Solutions. Preparación: 24 horas con bomba de aire (oxigenación) con ingredientes: Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Hummus Lombriz 8 ml/L + Melaza 1 ml/L + Kelp Hidrolizado 0,25 g/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Processing
Likes
52
Share
@MephistoGenetics, Hi all the happy people here in GrowDiaries. This is my second cultivation ever and it will be fun to try a bigger space than my closet grow. First, I'm just going to say I'm done with the construction of my new growroom. The room is 2.14 meters by 1.7 meters and has a ceiling height of 2 meters. It provides a floor area of ​​3.6 square meters. I use a 54 Watt Lightwawe T5 for germination and 2 Pcs 400 Watt HPS lamps. I have a channel fan that replaces the room air about 40 times an hour to get a comfortable environment in the room, the air enters a fresh air intake from the outside. The air is purified through a carbon filter to then leave the room to the rest of the basement. Then I use that heat to heat the rest of the basement. I will use 10 pcs 15 liter Autopots to grow with and a 100 liter water tank that supplies the pots of water and nutrition. I will grow completely organically in soil and will watercure my buds to get the best possible medicine for me. But there are no cultivation rooms to be displayed here, so I continue with what is most important. I am very excited to see how the new growroom will work and how this Stilton Special will turn out. Strain Name: Stilton Special F1 Genetic heritage - Sour Livers F3 x Northern Cheese Haze F3 Strain behaviour - Stilton grows well from the off, and develops into a stout but branchy specimine that leads to a fine yield of awesome flowers. She's not too stretchy but also is sizeable enough with good growth, to train and shape to your liking. Flowers develop pretty fast and grow to a good size, it may to advised to clear out some undergrowth and if needs be a very gentle defoliation mid-way through the grow, although leaf tucking may suffice well enough.The end product is of top shelf quality and she doesn't lack in yield either.Give your garden, nose, and body a treat and be sure to indulge in a slice of Stilton this year, You won't regret it. Size - 50 - 70 cm Structure - Medium height but bushy Flower Density - 9/10 Indica/Sativa - 65/35 Cycle Time - 65 to 70 days from sprout Yield - 90 to 140 grams as a single plant Best Method for overall high yield - 9-12 per 1,2m x 1,2m sq in 10-15 Liter pots (Soil) Aroma - Very strong, Cheesey/fruity/sour/spicey/ with a dash of coffee. Taste - Dank berries Effect - Good hybrid powerful but balanced effect Medicinal Benefits - TBA Best Grown - Indoor/Greenhouse Cannabinoids - TBA Extract information - Ideal extract candidate - High in resin, oil and terps. -------------------------------------------------------------------------------------------------- 2017-09-18. Start of week 4. I have defoliated her and she got water and nutes. She is 17 cm high and have not start to stretch yet. --------------------------------------------------------------------------------------------------------------------------------------------------------- 2017-09-19. 2 new fan is installed in the grow room. Added pic and video. ----------------------------------------------------------------------------------------- 2017-09-20. Kl 23.00. Did some massive defoliation, added video and pics ------------------------------------------------------------------------------------------------ 2017-09-22. The girl has recovered well after my massive defoliation. She is now 22 cm high. I accidentally lowered the lamp a bit too far down and burned some leaves on one girl. They have got water and nutrition today.
Processing
Likes
5
Share
Semana 12 de los esquejes y su primera semana de floración, en realidad llevan 9 días de flora. Hago los riegos 1/1, uno solo con agua(EC: 0.4) y el otro con los fertilizantes. En los riegos estoy utilizando Sensi cal-mag para llegar a una EC base de 0.4 y luego aplicar los fertilizantes. Regulo el PH con los reguladores de BioBizz. Por lo demás todo va bastante bien, las dos plantas van con buen aspecto y sin posibles carencias, espero que todo siga así. Seguimos con todo la flora!! Cualquier recomendación será bien recibida!!
Likes
3
Share
Semana 3 (1/8/22 - 7/8/22) Plantulas mostrando un buen enraizamiento. Se preparo una solucion de Elite 91 Myco Jordan iniciando la semana con: -PPM : 80 -pH : 5.8 3/7/2022 se transplanto a cubos de lana de roca de 15cm x 15cm. Los cubos fueron submergidos bajo una solucion de Mills Start R con: PPM : 100 pH: 5.7 En el transplante se uso Elite 91 Myco Jordan en forma de polvo para cubrir el hueco del cubo y cubrir las raizes de las plantulas para reducir el estres del transplante.
Likes
10
Share
Just chuggin along this week, didn't do much... struggled to keep temperature at stable 68°
Likes
Comments
Share
Likes
2
Share
@Organic_G
Follow
Sehen einfach wunderschön aus, habe die für die letzten paar Tage rein geholt da es sonst zu Kalt draußen war Heute wird der Rest im Zelt geerntet und dann bekommen die ein neues warmes, sonniges Plätzchen im Zelt um nochmal ordentlich Blüten auszubilden… Von der Optik absoluter Stunner, Purple in Kontrast zum knall Grün der Blüten, welche später noch Purpeln werden 😍😍
Likes
1
Share
@Barukk
Follow
Ph Perfecto trio solo aplicamos a 2 plantas 3 Girl Scout Cookies 1 Purple glam 1 Gorila Glue 1 sower Diesel 1 Whater melón Jam
Likes
10
Share
Nothing has realy happened since I cropped the royal cream....It is just hanging. Decided to do a dry trim so that it takes longer to dry due to the fact I am having to just use my cupboard so the humidity is pretty low. Leaving the leaves on just means It takes longer to dry. I am going to crop the Easy Bud in the next few days when the mood takes me. I had 4 left over R. Cream seeds left over because I informed them that. bought 2x 3 packs and only 2 seeds germinated so they sent me another packet which is REALLY good of them and the sort of thing that means I would definitely use Royal Queen Seeds again, for sure! The trich's are basically all cloudy with a few clear. I cant see any amber but my loupe is a ridiculously cheap Chinese piece of crap. I will invest in a microscope camera so I can hook it up to my phone or MacBook. It is way too hard to keep everything steady In order to see what is popping with my sexy trichomes. Obviously feeding has stopped for about a week now. I forgot to change it In the diary last week so will try and correct that now.. I know it is not strictly relevant but I had to go somewhere earlier and took a video because I was able o walk in the middle of a main road in my town which Is usually packed full of cars, especially at the time I was walking on it. It is a time that makes me even more glad I grow my own. I really need to buy the bigger tent, lights and re-locate to the bigger, more subtle cupboard (not the one i am using to dry my weed in the video I posted) and then I will be able to effectively ScrOG the 2 or 3 plants I have, in order to maximise yield so I can be totally self sufficient with regards to my cannabis medicine. UPDATE - MONDAY I just realised I have made a proper idiots mistake an missed out on some much tastier buds because of it. OK, so I got paid today, so I though I would treat myself to some of them cheap COB chips I used for my last grow because hey were super cheap and actually really effective considering the price. I ordered 2x 100w 6000k veg spectrum chips with a solderless connection for my power. I also ordered one of these heatsink + reflector. https://www.amazon.co.uk/gp/product/B01MT824NP/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 My thinking was that I have a spare heatsink here that the old citizen CLU-048 is attached to so I was going to fit one of the chips into that and the other into the heatsink and fan I bought. This hought process lead me to go ad retrieve the old citizen LED and I thought I would try it. Still didn't work, then suddenly I thought it could be a simple blown fuse so I changed it aaaannnnd.....still doesn't work. doh! I started to remove the COB holder and COB from the heatsink (it was just glued to it using thermal compound) and when I laid it on the table I decided to test the driver without the COB holder on the tiny off chance it might work...nope I then realised maybe I got the + and - the wrong way round, tried again and boom works perfectly. The connection from the holder to the cob had bent slightly off contact. Really annoying that this whole time I could have doubled my photons to the plant, however, really nice that I don't have to spend a load more money on lighting in order to upgrade into the new room. So all I have to do now is spend money on a pre-drilled heatsink and a new metal COB holder for the citizen.
Likes
2
Share
week 7 begins and the buds look about the same but, they’re reallllyyy starting to fatten up, the left one looks a little bit more mature than the right but we’ll cross that bridge when we get there