Hey Guys! Super excited this week! I've really been wanting to try growing outdoors, so I built a cheap hoop house! Got most of this stuff for the frame from Lowes under 300$. All the soil products I got from GrowGreenMI. Some really cool people out there. One thing I'm super worried about is drainage. Right now those holes are about 4 feet deep and they've got about 4 inches of water in them already. What's been cautioned is that, eventually, about 2 months in these plants roots will grow and reach the bottom and cause root rot to form. One of the biggest things I was trying to be wary of was causing root rot. This was also the biggest precautionary measure I took when mixing the soil. Adding the extra perlite, coco, and clay pebbles. Best advice right now is to build the soil up on the holes another 16 to 18 inches and possible stick a PVC pipe down to the lowest drainage point of the hole to allow some of that natural occurring water to evaporate. Any advice anyone has on it is welcomed! Making a compost tea for the soil outdoors, will probably put 2 cups in each RDWC bucket as well and let that do it's magic for a day or so before nutrient change. Raised the bed about 14 inches as well! All the seeds sank! Off to a good start! Lol

End of week 22: Overal it was a good run with the Shamans from @DutchPassion_Official . Didn't had mayor problems besides having to harvest them earlyer. I really wanted to flower them another 2 weeks but the weather/climate didn't allow me to. Still the buds came out decent as you can see for an early harvest. I will cure those buds for some time in my pots before they get smoked and will update how much weight I got out of the two plants. As you can see I made the bigger buds smaller. There is no use for me to keep big buds for showing off. Big buds just have big long stems in it, harder to dry and to fill your cure pots with.

Haven’t posted for a while now but she close to harc

Die letzten 2 Wochen laufen nun. Ich gieße die 3 nur noch mit Wasser. Ich versuche die Luftfeuchtigkeit und Temperatur zu senken. Die Blüten sind überall mit Harzdrüsen bedeckt. Sie duften irgendwie appetit anregend 😋

This is one of those days when this feels like work. But its done and should be smooth sailing from here on out. There are 2 different sized rockwool cubes. This was an ordering mistake but I think it will be ok. Their getting fed every 6 hours for 8 minutes now. I'll watch put for flagging and change accordingly.

🗓️ Veg – Week 3 Complete This week marked a small but important milestone in the grow: ✔️ Plants were topped ✔️ Lower growth removed (light lollipopping) ✔️ Transplanted into the final 15L fabric pots – root development was much further along than expected. A very pleasant surprise! 📌 First time using: Great White Mycorrhiza – transplanting went incredibly smooth, and the plants showed no signs of stress. Definitely planning to use this again.

on this week just wait and see..... ride on😘

Hello growers, Another week down. Nothing major happening so keeping it short and simple. After stretching she is 83cm from base to highest cola thanks to the training. I measured the main stem and it comes out around 1.4m in length. Flower development has gone into full effect. Decrease in temperature outside so hoping to get tight and dense nugs. Water 1.5L per day.

He who stops is lost, as an old saying goes I don't know exactly what the origins are, so here's a new Zamnesia season. We are in the middle of winter and despite growing in an area that isn't the warmest in Europe, it's really cold now. It's 16-18 degrees Celsius in the house and we need to bring the temperature of the propagator growbox between 20 and 25 degrees Celsius. So we first placed a layer of those 1 cm thick "rubberized" floors that are used for gyms, they are easily found on Amazon and are very useful for insulation. Then a heated resistance mat and then the closed propagator on top. Inside with our seedlings and the light on at minimum 20% we reached 24 degrees, not bad in fact the germination is proceeding very well. 100% opening of the seeds in water and almost all of them are opening in our biodegradable peat pots. ----- Our Green Cure F1 Hybrid Auto are growing fast at the time of the photos one was born now it seems that the second one is coming out. We need some CBD in our diet, we overdo it a bit with THC we use it to not go too crazy and not have the symptoms of excessive use of THC. We really like the genetic line and the fact that they are f1, let's go! It is a CBD Sativa Dominant strain that will probably be sent to our friends at AWC for the CBD category, let's see how it comes out... WARNING: Placenta Problems ---- ALWAYS look very carefully at the seedlings, if the seed or the placenta prevent the opening of the cotyledon leaves the plant dies after a while. Remove it delicately as if it were a condom or almost. I apologize for the example but it gives the idea, remove slowly and delicately please. WARNING: If you choose biodegradable pots, choose the largest ones possible and not paper/cardboard ones, they are made of peat which is the main component of most of the soils we use. If you want to avoid transmitting vibrations to your neighbors, I recommend installing one of these gym floors under your growboxes, I did it and I also feel safer not to disturb. They are easily found on Amazon in different thicknesses, I took a gym model that is assembled like a puzzle, they are also found in children's shops, they are those floors that are assembled to make children play safely, or to train and to avoid vibrations from equipment or of any kind. Everything will be grown with Plagron Pro Mix with 100% fertilizers, let's start with Power Roots 1 Ml/l Plagron fertilizers are available on Zamnesia in convenient Pack formats for all growing styles. I used this one with a simple search you can find the other products. ---- https://www.zamnesia.io/en/12119-plagron-top-grow-box-100-natural.html Try a seed of this strain that drives us crazy... ---- https://www.zamnesia.io/en/10672-zamnesia-seeds-green-cure-cbd-f1-automatic.html Zamnesia Description // Zamnesia's breeding team has harnessed F1 genetics to bring you Green Cure CBD F1 Automatic. This autoflowering cultivar is easy to grow, accessible and reliable for all levels of experience. Ready in just 11 weeks, growers can expect impressive yields of tasty buds with a clear-headed effect that's ideal for meditative moments. Growbox and Air System - Secret Jardin DS120w + fans + Exhaust fans and filters DF16 kit Light - Viparspectra P2000 https://www.viparspectra.com/products/viparspectra%C2%AE-2024-updated-p2000-200w-led-grow-light-with-daisy-chain-function ---- www.zamnesia.com

(This week has pics from weeks 2 and 3 because I couldn’t edit past weeks and had more photos. Future weeks will be correct) LST is well underway - pulling the main stalks back from the light to keep the canopy flat. The glueberry is growing much larger/faster than the amnesia haze. The glueberry is also showing some copper tips so we may skip the nutrients for the next watering and see how that develops. The glueberry is 20 cm from the light but still no signs of heat stress (from what I can tel) despite the hot weather.

This is the whole flowering cyclus posted in one week.

I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Great week so far :) will start some LST at the end of this week and be adding cal mag and some 1/4 strength bloom micro grow and then starting bud candy the following cycle :) Also have a nice little 3 leaf going ;p

Day 86 12/05/2021- Week 5 of flower almost done hopefully by the end of the month. Went out on a trip and GoPro never turn on for the last two days bummer but will upload time lapse videos daily. Today the lady got nutrients as well. Day 89 12/08/2021- Today the lady got water, really hoping to see buds starting to fatten up. Day 91 12/10/2021- So today the lady got a special treat, freshly collected rain water. She is just doing her thing and making those buds. I have also finally put the spider farmer SF-2000 at 100%. Also end of another flowering week, see you guys next week. --------Have a good one friends and stay high--------

Memes July Carnivores Topping High Cloudz 8/10 . Outside grow question-rot & caterpillar frac.

Should Be Finnishing up any Day now Strong Aroma

Will update on weight and smoke