Likes
Comments
Share
Likes
3
Share
Processing
Likes
7
Share
Hello everyone, The girls are finally outside in 20 gallon fabric pots. This season I have a greenhouse for them and I hope it goes good. Still have to build the first cages around them and start stretching them. 🎊🎉 finally, summer is here 🎉🎊 See you guys next week 🤞🤞🤘🤘👊👊👊
Likes
39
Share
Day 47 - I topped, defoliated and flushed with plain ph’d water 10 days before switch to 12/12 These led lights keep the plants really short with a lot of middle bushy growth have already taken 2 bags full of leaves and all look healthy still🤞👍 Day 48 - Looking good day after topping and defoliation :) good sign will update end of week 8 flip to 12/12
Likes
4
Share
0.23v tuned to 7.83Hz Plants exposed to the Schumann resonance often show greater resistance to stress factors such as drought, diseases, and pests. It is possible that these natural electromagnetic waves strengthen plants' immune systems and increase their ability to resist disease. Pretty neat, in the afternoon when the tent hovers around 84F the plants are 🙏, can visually see in time around 10 minutes after I opened the tent the temp had dropped to 76 pressure was lost, she is still chilling but she doesn't quite have that perk anymore. *Salinity3.5% - 100ml H2O=100g The concentration of salt in a solution 3.5%= 3.5g in 100ml. Growing well. Not going to top or do any training, I'll let the plant do its own thing, she is constructing foundations now for what she senses ahead. Smart girl. ✨️ Let her, do her thing, let me do mine. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity. Green hydrogen is hydrogen produced by the electrolysis of water, using renewable electricity. The production of green hydrogen causes significantly lower greenhouse gas emissions than the production of grey hydrogen, which is derived from fossil fuels without carbon capture. Electrolysis of pure water requires excess energy in the form of overpotential to overcome various activation barriers. Without the excess energy, electrolysis occurs slowly or not at all. This is in part due to the limited self-ionization of water. Pure water has an electrical conductivity of about one hundred thousandths that of seawater. Efficiency is increased through the addition of an electrolyte (such as a salt, acid or base). Photoelectrolysis of water, also known as photoelectrochemical water splitting, occurs in a photoelectrochemical cell when light is used as the energy source for the electrolysis of water, producing dihydrogen . Photoelectrolysis is sometimes known colloquially as the hydrogen holy grail for its potential to yield a viable alternative to petroleum as a source of energy. The PEC cell primarily consists of three components: the photoelectrode the electrolyte and a counter electrode. The semiconductor crucial to this process, absorbs sunlight, initiating electron excitation and subsequent water molecule splitting into hydrogen and oxygen. Water electrolysis requires a minimum potential difference of 1.23 volts, although at that voltage external heat is also required. Typically 1.5 volts is required. Biochar, a by-product of biomass pyrolysis, is typically characterized by high carbon content, aromaticity, porosity, cation exchange capacity, stability, and reactivity. The coupling of biochar oxidation reaction (BOR) with water electrolysis constitutes biochar-assisted water electrolysis (BAWE) for hydrogen production, which has been demonstrated to reduce the electricity consumption of conventional water electrolysis from 1.23v to 0.21v. Biochar particles added to the electrolyte form a two-phase solution, in which the biochar oxidation reaction (BOR) has a lower potential (0.21 V vs. RHE) than OER (1.23 V vs. RHE), reducing the energy consumption for hydrogen production via biochar-assisted water electrolysis (BAWE). BAWE produces H2 under 1 V while eliminating O2 formation: key word "eliminating". Air with a normal oxygen concentration of around 21% is not considered explosive on its own; however, if a flammable gas or vapor is present, increasing the oxygen percentage above 23.5% can significantly increase the risk of ignition and explosion due to the enriched oxygen environment. The addition of ion mediators (Fe3+/Fe2+) significantly increases BOR kinetics. Air: Nitrogen -- N2 -- 78.084% Carbon Dioxide -- CO2 -- 0.04% Hydrogen in homosphere H -- 0.00005% Hydrogen "GAS" H2 in homosphere - 0% "Nitrogen, oxygen, and argon are the three main components of Earth's atmosphere. Water concentration varies but averages around 0.25% of the atmosphere by mass. Carbon dioxide and all of the other elements and compounds are trace gases. Trace gases include the greenhouse gases carbon dioxide, methane, nitrous oxide, and ozone. Except for argon, other noble gases are trace elements (these include neon, helium, krypton, and xenon). Industrial pollutants include chlorine and its compounds, fluorine and its compounds, elemental mercury vapor, sulfur dioxide, and hydrogen sulfide. Other components of Earth's atmosphere include spores, pollen, volcanic ash, and salt from sea spray." Although the CRC table does not list water vapor (H2O), air can contain as much as 5% water vapor, more commonly ranging from 1-3%. The 1-5% range places water vapor as the third most common gas (which alters the other percentages accordingly). Water content varies according to air temperature. Dry air is denser than humid air. However, sometimes humid air contains actual water droplets, which can make it more dense than humid air that only contains water vapor. The homosphere(where you live) is the portion of the atmosphere with a fairly uniform composition due to atmospheric turbulence. In contrast, the heterosphere is the part of the atmosphere where chemical composition varies mainly according to altitude. The lower portion of the heterosphere contains oxygen and nitrogen, but these heavier elements do not occur higher up. The upper heterosphere consists almost entirely of hydrogen, cool. 78%nitrogen as N2, a far too stable bond to be used by organisms. 20%oxygen 0.04%co2 0.00005% hydrogen When lightning strikes, it tears apart the bond in airborne nitrogen molecules. Those free nitrogen atoms N2 nitrites then have the chance to combine with oxygen molecules to form a compound called nitrates N3. Once formed, the nitrates are carried down to the ground becoming usable by organisms. Will it react with the oxygen in the air spontaneously, the answer is no. The mixture is chemically stable indefinitely. A mixture with air near the release point can be ignited, but if this does not happen then when its concentration gets below 4% it will be unable to carry a flame. Taking a small detour into chemistry here, a key concept to understanding the health impact of nitrogen-based compounds is knowing the difference between nitrates and nitrites. What Are Nitrates and Nitrites? A nitrite (NO2) is a nitrogen atom bonded to only two nitrogen atoms. Very strong bond A nitrate (NO3) is a nitrogen atom bonded to three oxygen atoms. Weaker bond The optimal pH for nitrate (NO3-) depends on the process and the type of bacteria involved. Nitrification The optimal pH for nitrification is between 7.5 and 8.6 Nitrification is the process of oxidizing ammonia to nitrate and nitrite Nitrosomonas has an optimal pH between 7.0 and 8.0 Nitrobacter has an optimal pH between 7.5 and 8.0 Nitrification ceases at pH
Likes
39
Share
@Bluemels
Follow
Tag 84: Die letzte Woche hat meiner Shogun aufgrund der Hitze nicht so gut getan. Ihre Blätter sind sind insgesamt recht hellgrün. Ich versuche es aktuell mit noch mehr Alg a mic, vielleicht giebt ihr das ein wenig mehr grün zurück. Tag 89: Um die Shogun noch etwas in Form zu bringen habe ich das scrogging Netz hochgeschoben. Sie scheint langsam weniger Wasser zu benötigen, auch die Blätter sind schon recht hell, was wohl an den heißen Tagen liegen mag. Ist nur so das es noch über 5 Wochen sind bis zur Ernte 😲
Likes
1
Share
Day 84 The Durban plants are actively growing foliage and reaching for the light, despite being bent. Every day after the lights go out, I bend their tops parallel to the floor (training). Sometimes the stems break slightly, but they are still flexible enough to recover. In 2-3 weeks, I plan to transplant them to a permanent location, where there will be 20-30 cm of space above the tops for ventilation. In the next cycle, I think four weeks of vegetation will be enough for ripening. At Gordem Delicatesies (GD), Brazilians have stretched in 20 weeks, sometimes faster. For me, this variety develops more slowly; I'm not chasing maximum speed. Meanwhile, the Jack Herer is ripening in the box above them. I'm waiting for a manicure table (thanks to Mila for the tip!). As soon as it arrives, I'll start harvesting. I'm glad that with this device I can meet the deadlines precisely. Day 87 They hit a lamp and set one top on fire. The others miraculously survived. Today I tied the plants to their pots again with wire. I bent them so they were 10-15 cm from the lamp. Some were tighter. I cut out a 5-liter bag containing the lower branches, which were turning yellow from lack of light, and the leaves the plant had shed on its own. Watering was light but regular. I watered 3 liters by hand on top of the automatic watering. I added 1.5 liters of Simplex Taste and 1.5 liters of Simplex Aroma Punch. I started adding Simplex SilliX again—organic silicon is needed to strengthen the stems. Right now they look rather stiff; they bend easily by hand. This is a plus in my situation, but in a couple of weeks I want to see stronger, more vigorous central colas in the box. Mold was appearing on the dry leaves at the bottom that I didn't remove in time. I took out all the bushes and carefully removed all the dry and yellow leaves. I chose the ones that came off without effort. Their plant has already finished growing. After this procedure, the fan was able to blow air through the base, meaning less mold. Young buds are ripening on both plants, about 1 cm in diameter. The upper leaves and flowers are healthy; they were eating the lower burdock leaves. It's interesting to watch the biofertilizer from Greens work. I'll add Simplex Mass and Simplex Power separately in the next few days. And after that, HB-101. I'll water with Fitosporin at least once. I also want to add "33 Bogatyrs" bacteria – @NBRZ recommended it. Once a week, I manually pour a liter of solution with Simplex Taste (very similar to horse manure from the garden) and Simplex Aroma Punch – a potassium-sulfur additive to enhance aroma and flavor.
Likes
1
Share
Hi all, Nothing much to say. Have a look. She started to stretch quite nicely and keeps thriving. All good, no complaints.. See you next week..
Likes
Comments
Share
@Chamed33
Follow
Missed couple of weeks of updates!! She’s getting close to harvest one more week then chop
Likes
15
Share
@DRO420
Follow
Just repotted these clones ... They have amazing roots... Looking very healthy
Likes
13
Share
Start flushing Gelato on day 61, flush until ppm water same normally water 56-62 (Hope you like and enjoy my diary) Thank you so much for checking out my grows. Feel free to leave a comment, push the like or give the follow.
Likes
11
Share
12/12/23: Pasan a crecimiento directas a macetas de 11 litros: Sustrato All-Mix de Biobizz preparado con Great White Granular 1 y Guano Powder de Guanokalong 1 de 1 de Thomas Breader 2 de 2 Critical + de Dinafem 3 de 3 Peyote Forum de Seedsman 1 de 2 Sour Gummy de Dr. Undergrow 1 de 2 de Double Cookies de BSF Seeds 18/12/23: Segundo riego , primero con fertilizante de crecimiento de Bio Bizz , 1 ml por Litro : 6 Litros 19/12/23: Introduzco el humidificador en el cultivo
Likes
37
Share
Edit: I came home from work after making my weekly log entry yesterday and I could smell my grow from my driveway... so I asked for help. THANK YOU OOZLEFINCH FOR THE HELP.. THIS IS WHY WE ASK FOR HELP... I left a question on here stating that my new canister wasn't working and asked for generic advise. He left an answer that pointed out the fact that my exhaust fan might be set waaaay to high... and it was! It turns out there's a limit to the amount of air that filter fan 'scrub', and my exhaust fan goes way over that limit even on 6 or 7.. I turned it down to 3 and the smell got better immediately. ☮️ Still on auto pilot at this point... I'm really close to harvest.. and I'm not even on day 60 😲. I created videos this weeks, they capture the plants in ways that a still picture just won't. My entire house stinks.. my neighbors are looking at my funny, and my wife thinks a family of skunks is hiding in our walls... I've never had this problem.. I even got a brand new carbon air scrubber and its not helping 🤣 Process/ Environment changes since last week: - To help preserve the terpenes I've been trying to lower my temperature, which is hard without an AC unit I'm not plugging in an ac just to grow some plants. I'm at 24- 26 degrees C (75 - 82 F). - I've been lowering my humidity accordingly to keep VPD in a good range - I lowered my lights closer to my plants, turning them up would just add to the heat. - I'm defoliating as much large fan leaves off as possible - My watering pH is at around 6.7 to 6.8.. I will not be flushing these plants - I rotate my plants every day to make sure I'm getting light to hit every node it can This week I'm pulling out the digital scope and doing the first trichome checks for these babies. The cheese auto is going to get the chop by the end of next week.. I hope you like the video I added of it.. it's the easiest plant I've ever grown and she's going to be FIRE. The blackberry auto is giving off a gas/berry smell and is very sticky to the touch. A beautiful triploid... my first and I hope to get many more. The Forbidden Runtz smells just like a zkittles does, it's bang on. Very dense very sticky buds. I almost tossed her during the seedling stage too due to her mutation. I'm glad I reconsidered ☮️ Thank you Fastbuds
Likes
3
Share
- 2nd round of veg nutes; double the amount from last week & slightly upping cal mag - Keeping humidity at ~55-65% and temp between 70-80 when lights are on and 60-70 at night (lights off)
Likes
1
Share
@TTerpz
Follow
Start of week 4 Fed w nutrients: 7/11/25 Fed with water 7/13/25
Processing
Likes
5
Share
@EKWCR
Follow
I will try again, i know that is not the full potential of the Crtical +
Likes
15
Share
I was doin LST on one gg4 clone and and zookies clone snapped the top of the gg4 and the zookies split in the middle put tape will see how it plays off today
Likes
1
Share
@Organic_G
Follow
Erste Blütewoche ist durch, ist genug Platz nach oben, Nachschub ist schon bald wieder am Start auch wenn ich noch mehr als genug übrig habe
Likes
62
Share
6/28 I had to water deeply despite watering thoroughly yesterday. This heat wave is supposed to pass today. We have had temps in the 90's. Ihate it but the girls seem to love it. RH is super high and controlling pm is a pain in the balls. When my connection is better I'll add my vid and photos. Still need a follow up preventative spray. BT is really awesome but super narrow and I've found random stink bugs, earwigs, crickets and grasshoppers as well as easily identifiable leaf damage. I'm thinking Spinosid. Save my PM stuff for PM. Tried checking my PH with a soil meter. The bags are basically just roots. The only two plants it read came to 6.5 which is strange because I usually run around 7.3. I'll certainly take it. If it's correct that is. RH 64 TEMP 84 6/29 Didn't water this morning due to a torrential downpour last night. Nothing broken after first glance. The thunder and wind woke me last night. This storm was horrific yet my plants still seem unaffected. Need to rearrange the cage. It will be a pain to have to move that ice cream cake. Maybe I could find a way to modify the cage outwards. I also need to move the plant in the tote in the back. Luckily I got back and watered before plants dried out. Noticed a FEW dead or yellow leaves on the middle interior of some plants. I upped dosage of growbig last feed and fed a little earlier. I'll go back to my normal feeding schedule and see what happens. Thing is the plants are getting huge so I would think increased nutes would help. Couldn't he lockout. Too much water. Maybe nutes in the soil are leaving? I'll figure it out. I temporarily pulled the stalk on the ice cream cake back and tied it to the posts to get it off the fence. 6/30. 90s again today. I deeply watered and noticed a couple more yellow leaves (bottom middlish). Only thing that was changed was feeding. I may go back to original schedule. Funeral today so I'll have to check things out later. UPDATE: Went back maybe sux hours after watering to find the grow bags dry. I reached my hand in the side and it's pretty much all roots. These high temperatures and wind are drying my plants out. No droop but the soil WAS dry. I watered again and plan to check again tonight. When temps go down I'll probably do a preventative Spinosid spray. 7/1 Watered and fed two gallons. Grow big at 1 1/2 tbsp. Still some yellow leaves on the interior. I'm talking like maybe five. Accidentally destroyed lace wing eggs. I knew it was something to keep an eye out for but I mistakenly thought it was BAD. Oh well it was just two eggs. I'm sure there are more. Tried measuring PH with soil meter but the only two plants that registered were 6.5 and 6.6. I believe the PH to be a bit higher. The bags are so full of roots it's hard to get a measurement. I know my soil and water WAS on point before my gauge broke. However I leave the 7.3 as that was about what the big ones tested at last time measured. 7/2 These are some resilient strains. Currently 54 degrees at 9am. It had been 80 or 90 in the last few days. Perfect rain today. A light shower all day. Obviously didn't water. Found a few yellow leaves but the plants look so good. The also seem to be stretching but it's far to early for the preflower stretch. I'll keep an eye out. Things are looking pretty good. Still need to move that plant in the back. 7/3 Watered today. Looks like it might rain but top soil was a little dry. Also noticed this site measures teaspoons not tablespoons which is how I measure. I'll need to adjust that. There's tell tale damage from a variety of pests (leaf hoppers, pillars, grasshoppers ECT.) So I think I'm going to do a spray within the next couple days. Im leaning towards Spinosid but Dr. Zymes supposably helps the PM as well. I'll do more research and update. 7/4 54 degrees and raining. Haven't checked the girls out yet today.