All 9 seeds were placed directly in the soil on 01-01-2022, germination varied from 07-01 to 12-01 The Zamnesia seeds were the fastest and come out in 7 days, Anesia Seeds 8 days then Amsterdam Marijuana Seeds AMS and Fast Buds booth 10 days and last one was Amsterdam Genetics with 12 days Started with a lap power of 70% but i was fighting a bit to find the right balance in temperature Light regime ☀️24/0🌑 temp ☀️25/32.5 🌑 24/18 During seeding period the led lamp was set up at a distance of 25cm and turned down the power of 35% of his total power. Light regime ☀️24/0🌑 temp ☀️24/28 🌑 24/28 After all plats was minimal 1 week old i changed the power up to 50% and moved the lamp up to 35cm from the ground and als changed the light regime . Light regime ☀️21/3🌑 temp ☀️24/28 🌑 18.5/24 🌧️☀️🌧️

Hi Guys:) Today is the update of the Blue Gelato # 41 🌱. She looks very healthy 👌. It has grown very nicely this week. The buds start to develop and the sweet smell gets stronger every day 😍 I love this phenotype, it smells just like the last grow when it was in organic soil 🤗 I wish you all a good start into the new week, let it grow and stay healthy 🤗 🙏 🏻 🌱 🍀

La planta se estiró muy rapido y con la luz empezó a crecer hacia los lados en la noche la saco para nutrir y cada vez absorbe más agua trato de darle una vez a la semana alimento y agregó agua cuando el sustrato se seca

Week 9 - First Week of Flowering 🌸 The dark period has ended, and these ladies came back into the light fully energized and ready for action! It’s just the first week of flower, and they’re all praying, stretching, and absolutely thriving—filling up every inch of the tent. This grow space is officially packed from wall to wall, with each plant competing for its share of light and showing off some of the biggest, healthiest leaves I’ve seen yet! 🌱 A few strategic plucks here and there have kept airflow smooth and light penetration balanced. Those big leaves? They’re a sign of happy, healthy growth. Large leaves help the plant capture maximum light energy, essential during this stage, especially as they start focusing on developing those flowers. When plants grow huge, vibrant leaves like these, it means they’re well-nourished and content in their environment—a true testament to the well-balanced conditions we’ve got going in the tent! Flowering Parameters 🌡️ Room Environment: • Temperature: 26.7°C • Humidity: 63.3% • CO2: 960 ppm • VPD: 1.29 kPa (prime zone for flowering health!) Lighting: • Light Intensity: 835 PPFD (ideal for boosting flower growth) • Solution: pH 5.96, TDS 460 ppm, temp 21.1°C • Medium: Moisture: 100%, TDS: 520 ppm, Temp: 21.6°C Carbon Filter Installation & Smell Management 🌬️🌱 With the transition to flower, the scent profile is already starting to kick in—crazy for the first week, right? 🌸 To keep everything fresh and under wraps, I’ve set up a carbon filter system. Here’s how it’s working: I’ve connected the filter to my Aerofan, which pulls air directly from the tent. This air is cleaned by the filter and released into the main room, where it then passes through another filter before exiting my space. This dual-filter setup means no scent escapes into the wild, keeping things stealthy and the grow room a peaceful, scent-contained environment. Perfect for anyone concerned about keeping their home free from that telltale aroma! 🕶️🌬️ Enhanced Lighting with Emerson Effect 🌞 This week, I’ve introduced an extra 15 minutes of red light at the beginning and end of each light cycle. Why? Well, this red boost taps into the Emerson effect, enhancing photosynthesis efficiency, especially during the flowering stage. By stimulating a little extra wake-up and wind-down light, we’re mimicking the natural sunrise and sunset experience for these plants, which can help reduce flowering time. Not only does it encourage smoother transitions into day and night, but in theory, it’ll help these ladies finish a bit faster, while giving them a little nudge to build more substantial, quality flowers. 🌇 Nutrient Adjustments 🌱 Now that we’re in flower, I’ve swapped out the Start Booster for P-Boost and TopBooster to specifically support flowering needs. Here’s why: • P-Boost brings in additional phosphorus, vital for energy transfer and cell division as the plant channels more resources into budding sites. • TopBooster supports the flowering phase by improving flower quality and density, helping to build those big, aromatic buds we’re after. These changes bring the nutrient mix in line with what’s most beneficial at this stage. All this precise dialing in is easy to manage thanks to the TrolMaster system. From pH to nutrient scheduling, the TrolMaster ecosystem and ThinkGrow LEDs have been the ultimate teammates in this grow journey, giving me real-time data, fine control, and peace of mind. 💯 (Not introducing UV light just yet, but stay tuned as that’s coming soon for an added boost!) Looking Forward 🌟 Next week, we’ll be upping the reds, giving us an even greater chance of activating those flowering signals for a smoother, faster transition through the cycle. I’ll keep tweaking and fine-tuning every parameter to make sure these ladies get exactly what they need to thrive. Big thanks to the TrolMaster system for keeping everything in balance and optimized, along with the supportive Grow Fam following this journey! Your enthusiasm, advice, and support are a huge part of this grow’s success. Keep following for more updates, and stay tuned for what’s next! 🌿✨ P.S. Deep Dive: TrolMaster’s MBS-S8 CO₂ Sensor & Smoke Detector 🚨 The MBS-S8 CO₂ Sensor from TrolMaster is a powerhouse for growers, especially when it comes to optimizing plant growth and efficiency in a controlled environment. This sensor continuously monitors CO₂ levels and integrates directly with the TrolMaster ecosystem, giving you real-time data on CO₂ concentration. Ideal levels of CO₂ can significantly boost growth and yield during certain stages, so understanding and managing CO₂ is key. With the MBS-S8, I can control CO₂ levels precisely, keeping them within the optimal range for photosynthesis. This sensor is a game-changer because it adjusts CO₂ delivery automatically, giving plants exactly what they need without any extra monitoring from me. Meanwhile, TrolMaster’s Smoke Detector is an essential safety device, especially in spaces with electrical equipment, lights, and heat-generating components. This detector can be set up to alert me instantly via the TrolMaster app if any smoke is detected, allowing me to respond immediately to any potential issues. Fires and smoke are rare in controlled grow setups but having this safety measure provides peace of mind and lets me focus on the plants without constant worry. It’s an incredible tool for any grower prioritizing safety and proactive monitoring. Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚

Can't keep up with defoliation once the autopots kick inn, best room upgrade ever. The Cuppa T was the biggest plant before the other four went in their autopots. Just pH water this week and a foliar feed with my KNF FAA, WCAP and LAB. Flowering start on the 29th under the new Lumatek Attis 300w

Hi guys, sorry if I posted this week so late, but I was sooo busy! This week, I began to give two first doses of Flawless Finish, to start clean the soil (and unlock Indra from its nutrient burn). Aurora is growing really great, has a powerful smell and a white color when I get photo of her at night 😍 Indra began to grow again, after the use of Flawless Finish, the flowers are getting bigger and the smell is growing day by day, I will post her trichomes the next week! Enjoy the photos guys, and thank you all for the help :)

16 days of slow drying each plant with the environment controlled inside the tent with 2 meters. I have two fans on, pointing at the floor to circulate the air temps - 20 - 23 º humid - 50- 60 %

These girls are getting super frosty, especially the Pineapple Skunk. In the middle of the week I learned a lesson. I chopped off a few larger leaves from Pineapple Express 1 and that stressed it out sending out just one (hopefully) banana. I pulled the banana and since I didn't see any other bananas or signs of stress I decided to carry on and not harvest early. The smell started to become stronger this week, I can get a big whiff of it when I open the door early in the morning before the fans take all the smell out. In the middle of the week I moved from "Late Bloom" nutrient mix into "Ripen". I want this to be on the early side of the harvest so it is more awake. At the end of this week I saw little to no amber trichomes. Nothing exciting except the awesome photos! They have all become very fat and crystallized. I have no idea what to except for harvest weight. Maybe the same as my last grow which had taller but thinner stalks in the same grow space. Stay-tuned for the final week and the harvest updates! I have already started my next grow and I'll be raising 2-3 Blue Dream plants. Hoping to get that monster harvest I've been shooting for! That might not be this time but maybe next.

Motherplant of this clone didn't give same buds as a clone. Shame I don't have mother plants anymore. I would recommend Durban Poison for everyone, I guess more people should feel this strain. This is my favourite sativa from 2019!

Didn't get all what i can, because it's stop stretching sooner then most strains before.

Just look at it. All deformed and shit. Already has a fat stem on it.. maybe the nutes should be toned down? God knows. 4/2. It's like it's growing sooooo many leaves... plain water at end of week. Contemplating defoliating it...

Bonjour les amis, Pas de changement morphologique cette semaine mais la résine est apparue en même temps qu'une légère odeur.😻 M.

On day 1 the reservoirs PH is 6.3. The plants are starting to bulk up now. On day 2 I changed out the reservoir and adjusted the PH to 6.1. On day 3 I adjusted the reservoirs PH from 6.3 to 6.1. On day 4 the reservoir is holding at 6.1. My right plant experienced another run away so I reduced flow rate by one carrot can't quite get it right this run... The colas are really starting to fatten up 😀 On day 5 I adjusted the reservoirs PH from 5.8 to 6.1. On day 6 I adjusted the PH of the reservoir from 6.4 to 6.2. On day 7 I adjusted the PH of the reservoir from 5.9 to 6.2.

3.07 I checked for signs of bananas. All clear. Some of the plants needed to be tied up. Strong flowering begins. I hope nothing happen to them 4.07 During the day in the tent was heat as hell. While I slept they were warm. I cannot switch on clima during the day because of technical problems. 5.07 Clima is broken, i water Penahyah from Hype Company cause of too much heat, and little dose of Frooting Power from BAC.

Hello people, how are you doing? Week 9 is here and we are almost there to harvest those beauties. Everything is OK, no bugs, no troubles, just happy to see how the plants are growing... Thank you to follow this diary! Peace and love!

Hi guys,i have some news for you and of course we are celebrating 👻🎃 1)Now the lamp works at 50% plus we are testing the sunset/dawn function. In fact, it simply reduces the power by 25% two hours before turning off and the same with turning on. I don’t know what this will give us, but the understanding that we are closer to nature warms the soul☺️. 2) It turned out that all the time I pour increased psh 6.4-6.8. The point here is that I prepare the compote in advance, respectively, I also lower the psh in advance, and for some reason in my sick head I was completely confident that Plagron ph down would keep the psh at the value I needed, but I was wrong. (Now it’s worth thinking about which of us is still down). Because of this jamb, we have a couple of unpleasant things, the first and most unpleasant thing is a delay in development, as well as all sorts of dirty tricks on the sheets, which they kindly told me that I was doing something wrong. Photos are attached. 3) Changed the composition of the compote. StartUp was removed. It was replaced by the Plagron Coco a+b and Fish Force base.