All appears well with these Ladies 😸 They are all continuing to flush. Happy with how everything looks, until next time 🌱💚

FLOWERING STARTS In the the new marshydro set-up 120x120x200 4'x'4 FC-4800 lamp Pubes are showing on all of them happy days in the absolutely amazing marshydro tent 👌🏻💯👌🏻 and no balls in the room yet so that's good at least i know that first grow i had issues with hight but with my 120x120x200 that not going to be end problem so stretch like ya never stretch before 💪🏻 i am prepared now lol the FC-4800 is a beast and still tweaking hight dimmer don't want to burn them but also want to utilize the lamp as much as I can but will get under control 🤘🏻😎🤘🏻 1/11/21 Did some last defoliation and spread the plants out bit Tru the tent got lamp dialed in dimmer around 55% and hight around 45cm above the plants and every week will bump up the dimmer with 5% they are looking very good healthy and i am very proud of the results so far gave the proper nutrients and the normal watering in between everything cool in the hood Will be updated soon happy growings Growmies visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

pistols are beginning to turn amber. thrichome development increases each day. buds are starting to get bulky.

7 or 14 days before chop.

The mystery cookie males have been topped,and I will reveg them, mom is all alone, and able to stretch out a bit with more light. Temps and humidity is stable. 05/16/2018 5weeks into flowering MYSTERY COOKIE males are removed, Captains cake heavily fertilized by the twins. Mom's last day in sunlight look at her colors 05/21/2018 End of week 5 flowering, getting more outdoor pics natural daylight, very sparkly hope my camera picks them up!

Day 43. Still seems to be stretching. Minor defoliation, general Hydroponics maxigro every other watering til 15% runoff. Day 47. Chunking up nicely. All 3 of my fastbuds plants are awesome.

D68 - The first day in the final week as I'm planning on chopping her in a couple of days, on day 70. D70 - CHOP DAY! I cut her down, removed a few fan leaves, and hung her to dry. I set the Inkbird controller to 55.5% RH (+/- 2%). Now we wait.

Flushing the second one and pics of airdrying the first harvest Starting harvest #2 10.08.24 Starting curing harvest #1 10.08.23 Everything goes pretty well besides : Trimmings moulded so i had to throw them away unfortunately :( But I already know what the problem was so my fault 100%

This past week was a busy one. Put a lot of work into the grow space and prepping them to switch. Moved over to the 5x5 tent and set up the netting. Went through a lot of defoliating spread out through the week to make sure it went as stress free for the plants as possible and then lollipopped the plant before changing over to Flower (remember this is my first time growing so didn’t want to overdue it). Me and the girl spent some time and Cleaned out the tent completely and finally got around to cleaning up some of the wiring throughout. I flushed all the plants with RO water (only pH) and then 3 days later i mixed in and topped all pots with fresh soil mix (FFOH, worm castings, and perlite). Drained and cleaned all pots and the tank, added in new water with a mix of cal mag, big grow, and tiger bloom (half amounts of everything) with PPM just over 1000. Switched over to flower just before this post so fingers crossed and hoping the next few weeks go smooth 🤞🏽 **Side Note** - Got a steal on some tents/lighting so decided to get things setup for my next grow. Got a handful of seeds I’ve had my eyes on and getting ready to order some more equipment and even a Centurion Hybrid Trimmer. So be on the lookout for my future grows!

Papaya and Aurora Indica grown in scrog. Were big enough to almost cover canapy in first few days.

We are nearing the end and she looks beautiful. I will flush with plain RO water the next week or two while she ripens. I didn’t do any training to her. I have a clone from her and I cut a few leaves from the top of the meristem when she was vegging and she responded with 6-8 branches catching up with the top.

03/18/24. Entering week 4 wow. Times flying. Nothing really interesting to update on. #2 is driving me crazy. It seems like she’s always getting upset about something. When I think I figured her out.. she’s like nah, here’s some other strange leaf issues. The other 2 seem perfectly fine. Im thinking now maybe from me cutting back on food before because she seemed over fed-now she’s too hungry. Her leaves seem a bit pale in certain areas now with tiny reddish coloring on edges. Aside from that it seems like she’s still doing her flower thing. All 3 seem frosty and the leaves are sticky and smelly lol. Going to feed #2 a bit heavier than the others for now. Forgot on post earlier to say- Light at 18 above at 75%

CLOSE!!!!!! she is absolutely friggin caked with trichs!!!! just need her to plump up a little so we got some weight to her but she definelty looks potent af!!!!! only issue this run really was the stretching. I have a theory about why this happened and will test it out next crop, got the next ladies germed up already. I think removing the third fan allowed it to be to calm in there and the ladies to stretch more, this is just a theory i'll test out. If i had the space, i wouldnt mind the stretch but being in my little 5.5 x 5.5 tent i cant waste any space!!! am i going to break the tent record of just under 800 grams dried? probably not lol but lets hope for 600+

Love this 1st grow. Even though its small. Hope I got good weight out of this. Smells great whenever I open my cupboard. Cant wait for my next grow green gelato auto. 😁

13th - Checked the power usage data from the AC unit and the Smart logs: around the time heat stress on #1 occurred the AC barely turned on. New zigbee sensor is working well it seems! CO2 tank is almost completely empty. I lost a fair bit from a few incidents I suppose, maybe a lot more than I thought!?.. ..want to look into stopping CO2 when AC is running with smart power switch and app. 14th - CO2 tank depleted. Setup smart plug on CO2 regulator, works fairly well. Occasionally stays on for a bit more than it should, but then self corrects. I can take that as an improvement.. 15th 16th - Replenished water tank - TDS 650 , gave both a good soak, runoff was 1200 initially and eventually down to 800. 17th - Concerned about density - have clipped several sappy buds growing into already thick areas - hoping to improve ventilation within the canopy. Rotated the pots a bit and adjusted the tie downs.

Se realizó una defoliación en la parte más baja y en las 2 hojas más grandes de la parte superior para que pudiera entrar de mejor manera la luz a los brotes más pequeños. Se aplicó Voodo Juice para las raíces y Top Bloom para la floración, ya todas tomaron de buena manera el cambio del fotoperiodo. Seguimos 👽 ...

Bonjour à tous les padawans et les maîtres jedis La semaine 4 est déjà là! Décidément cette plante est vraiment exceptionnelle! Elle représente la force et j'en suis fier 😍 Je me donne pour defi que durant mon LST je fasse faire au tronc un tour sur lui meme. Ma plante est saine le LST ce passe relativement bien je l'ajuste tout les jour je le combine avec la technique du pincage d'Apex cela me permettra d'avoir une canopé plus homogène donc une meilleure pénétration lumineuse et par conséquent un meilleur rendement. Le pinçage est une pratique courante en horticulture. Beaucoup de cultivateurs l'utilisent pour améliorer le rendement de leurs plantations cannabiques ou autres. Il est souvent question de 'taille' des bourgeons apicaux. Cette taille se pratique également mais il n'est plus alors, à proprement parler, question de pinçage. A l'instar d'une taille, le pinçage va permettre de stimuler le développement des ramifications tout en préservant les sommités en vue de la floraison. Il est très utile pour uniformiser une canopée. Pour réaliser le pinçage, il vous suffit de presser 'fermement' la tige [entre le pouce et l'index] aux environs de l'apex jusqu'à sentir un léger 'crAck'. Cela aura pour résultat d'endommager les vaisseaux impliqués dans la circulation de la sève [situés dans le pourtour de la tige], la tige conserve toutefois une certaine rigidité. Pour obtenir le même résultat, il est également possible de vriller légèrement la tige sur elle-même. L'interruption du circuit d'alimentation entre le ou les apex et le reste du plant va provoquer un déséquilibre hormonal qui aura pour conséquence le développement des ramifications antérieures au point de pinçage. Jour 25 j'arrose mon pot normalement avec un quart de son volume en eau toujours avec un PH de 6.3 à cette eau j'ajoute 0.7 gramme de greenhouse feeding enhancer pour favoriser son développement racinaire. Par la suite je n'aurai plus qu'à ajuster mon LST jusqu'au stretch et surveiller mon arrosage, Je pincerai mes apex suivant la pousse de la plante pour uniformiser la canopé. Jour 26 à force de patience et de délicatesse j'ai réussi le défi que je me suis fixé en faisant faire au tronc un tour sur lui meme (photo jour 26) ce défi ma permis d'améliorer grandement la technique du LST. Au-delà de ça cela ma permis de donné au tronc une structure en forme de colonne vertébrale ce qui a pour conséquence une meilleure pénétration lumineuse et une belle canopé homogène. Que la force soit avec vous 💪

This first week of flower was entirely uneventful.

09/19/2018 All going well buds filling out resin sparkle all over flowers and leaves this plant is destined for my top shelf of slow cured buds can't wait to taste each one and compare to each other,to see if my breeder was as good as I have hoped for. Sorry for the rambling on racy thoughts today need my Indica to slow my roll lol😎 Ps. Sorry I posted last weeks video,will fix in morning. Sleepy 😪 time indicas doing her job! 09/23/2018 Pistils still coming out some turning brownish red,as new ones pile on top,hope she fattens up well cooler weather is on the way,maybe see some fall colors,we have probably 2-3 weeks before avg. 1st frost, but no hard frost for a month or two.? Our falls can be quite nice! If rain holds off👍🙏

Hi Guys, she seems to recover the slowest of the three plants I damaged in the seedling stage. I decided however to still give her a chance, as the root development looks promising. I have also transplanted her onto the DWC in the big tent. As I don’t have a dimmer for my sanlight, I have increased the lamp height to 65 cm above the canopy, so that she can slowly accustom to the light intensity. Nutrients remained the same.