Likes
Comments
Share
At the end of week 10 the 18 CANNALOPE HAZE plants from DNA-GENETICS are ready to harvest. The plants have all started to fade and get yellow leaves and hardly have any whit pistils anymore. I check the trichomes with a handheld microscope and see that they have all turned milky and some even amber...now is the PERFECT MOMENT to harvest them, they have reached PEAK-THC now. The colas on each plant are HUGE and COVERED IN TRICHOMES. A strong 'hazy' aroma is filling out the tent, its an earthy and mildly sweet smell, very enticing, I cant wait to try my medicine after its dry. The plants on the left side under the LUMATEK ZEUS 600W PRO are less uniform (=some are taller, some are smaller) and less compact than on the other side. The right side under the two SANlight Q6W-Gen.2 LED-lamps has grown more uniform (all plants have almost the same height) and with more compact buds. The trichome production was very good on both sides, the quality of the buds is OUTSTANDING!
Likes
1
Share
Likes
2
Share
@bbs42
Follow
Smell starting to kick in. Plant is drinking more water everyday. I'm no longer feeding any nitrogen
Likes
6
Share
@GrowTF
Follow
Sehr sehr schöne Verfärbung. Die etwas später angepflanzte Epsilon(Links) wächst buschiger und Kompakter als die erste (rechts).
Likes
24
Share
03/23/25: I’m very pleased with the progression of this grow so far. All five plants are showing consistent and vigorous growth, and each one has maintained the same level of vigor and size relative to the others since sprouting. This consistency is a good early sign of genetic stability and uniform structure, which will help with canopy management as we move further into veg. At this point, each plant is developing its 4th and 5th nodes, which is a key marker in early vegetative growth. Once the 5th node is fully established, I’ll consider topping or training, depending on the growth structure and the phenotype expression of each plant. After removing the humidity domes last week, I noticed that the first set of true leaves—which had been sitting in high humidity—developed browning on the edges. This is a common reaction when leaves are exposed to open air after having retained too much surface moisture. Fortunately, this issue was limited to the oldest leaf set. All new growth has adjusted perfectly to the environment inside the tent, showing healthy development and no further signs of stress. The plants’ deep green color indicates that they are receiving sufficient nitrogen, which is essential during this stage of growth. Additionally, some of the larger fan leaves are beginning to curl slightly inward, which may look concerning at first, but is actually a natural response to airflow. The plants are adjusting to the oscillating fan in the tent—modifying their leaf shape to be more aerodynamic. This airflow helps: • Strengthen stem tissue through gentle mechanical stress • Promote root zone development as the plant adjusts its internal resource allocation • Increase resilience to environmental fluctuations So far, no roots are visible at the bottom of the starter pots, but I expect them to show in the next couple of days. As soon as they do, I’ll transplant each plant into 1-gallon AirPots. AirPots encourage rapid root pruning and horizontal expansion, which leads to more efficient nutrient uptake and a healthier root system. Once the transplant into AirPots is complete, I’ll provide a full update along with new photos showing their root development, new environment, and how they respond post-transplant. Everything is looking on track, and I’m excited to see how each of these phenotypes continues to express themselves over the next phase. 03/25/25: Today I relocated all five plants from the 2x2 seedling tent into their permanent home: the 4x4 AC Infinity grow tent. This is an important environmental shift, so I’m allowing the plants some time to adjust before making any further changes like transplanting. They’re now sitting under the AC Infinity S44 grow light, which is currently set to 20% power. The light is positioned 24 inches (approximately 61 cm) above the canopy. According to my budget PAR meter, the plants are receiving around 350 PPFD, which is a safe and effective intensity for young vegging plants still acclimating to their new space. Although the original plan was to transplant them into 1-gallon AirPots around this time, I’ve decided to delay that by a couple of days. Environmental shifts—like new lighting, airflow patterns, and spatial layout—can stress young plants, so I want to give them time to adjust before introducing transplant stress. This move also gave me a chance to set up the AC Infinity AI+ Controller, which I won in a contest last year (huge thanks to AC Infinity). So far, my first impressions are positive: • Setup was just as smooth as their other controllers. • It’s already doing a great job managing the environment passively. • I haven’t explored all of its automation features yet, but I’m excited to see how much precision it can offer, especially for managing VPD and dialing in climate conditions throughout veg and flower. Once the plants have had time to settle into the new environment, I’ll transplant them into their 1-gallon AirPots and provide a full update with photos.
Processing
Likes
10
Share
One of the last days of 2x 16 colas and 2x 4 colas mainlining 4 month growing. Jamaican Dream and Green crack potted together and the experiment was successful. Three Blue kings was stressed in vegetative period by iron excess and overwatering. This is the reason that lower buds did not developed better. Amherst Sour diesel have one of the biggest buds I have ever seen. Jamaican Dream should be developed smaller, like Green Crack, but 100% sativa genetics showed it's greatness. Green Crack was growing like Jamaican Dream in vegetative period, but in flowering period its growing was slowly and now it has become very thick and full of buds. My growing box is very cheap but I tried maximum of my budget. 600w HPS is one of the greatest lamp for indoor growing. At flowering stage I have increased 600w to Super Lumens on my digital ballast for maximum yield. Main mistake is that I have used very cheap and primitive pots and soil was not enough good too. In these days I'll cut diesel and kings tops, because they are almost ready and lower buds need 7-12 more days to be ready for harvest.
Likes
13
Share
@gr3g4l
Follow
Visto que el agua de base sale con unos valores muy altos he decido obtar por mezclar el agua de riego con agua destilada mitad/mitad. De esta forma le podré aportar mayor cantidad de nutrientes sin que los valores suban excesivamente. Por otro lado también le añadiré ácido cítrico para bajar el PH. Os presento como voy regando, es un inventillo que hace años hice y sigue dando guerra. Va muy bién para repartir el agua y relentiza el riego haciendo que el agua vaya filtrando mejor por el sustrato. El embudo lleva una malla donde se quedan los restos más grandes y así no se atasquen los abujeros. Alguno dirá que pierde agua pero no es así, el agua que cae fuera es por que no tube punteria al llenar el emudo y casi lo tiro todo fuera. No se puede hacer tres cosas a la vez, soy hombre hehehe. no podia rellenar el embudo, regar y filmar con el movil al mismo tiempo. Y a más el video está reducido a cámara rápida por lo que parece que pierda aun más rápido.
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D50/B13 - 04/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 24°C H: 60% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D51/B14 - 05/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 25°C H: 60% 🌊 15L 🍗 CalMag, Bloom A-B, Bud Candy, B-52, Big Bud 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D52/B15 - 06/06/24 ⚗️ EC: 1.0 pH: 6.0 🌡️ T: 25°C H: 60% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D53/B16 - 07/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 80% 🌊 4L 🍗 CalMag, Bloom A-B, Bud Candy, B-52, Big Bud 💧 pH- 💼 Added pH- in order to keep the water on the lower side for a while 🧠 🚀 🎬 1 TL video ______________ 📅 D54/B17 - 08/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 80% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D55/B18 - 09/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊15L 🍗 CalMag, Bloom A-B, Big Bud 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D56/B19 - 10/06/24 ⚗️ EC: 1.0 pH: 6.1 🌡️ T: 25°C H: 70% 🌊 🍗 💼 🧠 🚀 🎬 1 TL video
Likes
6
Share
@valiotoro
Follow
Easy trim ✂️ The smell is citrus & pine delicious 🍋🎄 Harvest in 2 times first the top buds then 1 week later the lower buds Now 7-10 days in the dry racks then the smoke review in 2025 Take care 😎
Likes
31
Share
@Alex8o
Follow
Starting to feed plants with molasses. Smell taste Is changing from vegetal to fruity .😍 Added smart thermohygrometer sensor for Optimize humidity ranges also it's rainy this week and humidity raises a lot. Installed 100mm pipe in intake ending to heater and controlled by thermosmart sensor for lowering humidity since it's rainy days.
Likes
16
Share
What can i say. She is a stonker. Smells amazing looks mental. Fastbuds smashed this one again. I am excited about this one. I havent seen anyone grow this before.
Likes
71
Share
@Roberts
Follow
Quebec Blast is doing well. She is showing first signs of flowering a week into light change. I adjusted nutrition more to her current demands, with a solution change today. Everything is going well, I don't expect a lot of stretching. I could be wrong. I am growing her under a Spider Farmer SE5000 light at 70 percent. She is in New Level Hydro 5 gallon bucket. Thank you Spider Farmer, New Level Hydro, and Quebec Seeds. 🤜🤛💪🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g SE5000 https://amzn.to/3qFpAML Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com UK: https://spiderfarmer.co.uk CA: https://spiderfarmer.ca EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au Coupon Code: saveurcash Www.newlevelhydro.com Www.hygrozyme.com
Likes
45
Share
@valiotoro
Follow
Very very sticky i had to change gloves every 2-3 buds!🤓 Delicious smell🤤
Likes
3
Share
Likes
35
Share
@Rap_a_cap
Follow
Hey Growmies, some of you had asked to me if I prepare concentrates.......Yes I do! I don't like modern rosin extraction but instead very rarely I like to smoke some oil. The following is the recipe of cannabis oil made by ancient Mustapha's process. It needs: pharmaceutical grade ethyl alcohol (96.5% by vol.) or 95% for liquors Weed A jar with rounded bottom A lot of time This oil is 5 months aged, from 20 grams of weed I've obtained 3.5 grams of product. Trim previously dried weed (20 grams) and put into a 500 ml jar. Cover with 200 ml of alcohol and leave it partially covered with cap. Let alcohol to evaporate on itself and shake the mixture 2 times a day. The most of the solution will evaporate within 10-15 days. When the solution is evaporated by 2/3 it needs to be filtered between 90 and 120 microns. Now is the time to finish and decarboxylate the solution by heating the jar by bain-marie until the green cream sticks to glass. The jar needs to be refrigerated before you remove the cream with a spatula to transfer it into a smaller jar. Store it in a dark place and open twice in a week for few seconds. You'll obtain a petroleum green/dark amber cream (the green tone will turn into dark brown by time). If the job is well done the surface will crystallize and will shine like a mirror. This cream is insanely sticky. Smoke one drop a time. The collapse is around the corner. Tips: Best results, in terms of flavour/aroma, with single strain Let alcohol to evaporate very slowly, take away some macerated weed (after at least 48 hours infusion) and add new weed/hash pieces little by little. Act as if it were a piggy bank. The final product is a very strong shit, really narcotic.
Likes
10
Share
Dzień 16, zauważyłem ze liście skręcają się do środka, lampa podniesiona 0.5cm, po 12h liście wracają do normy Zobaczymy jak będzie jutro. Warunki stabilne temp w dzień 26-28C wilgotność 75-85%. Lampa ustawiona na 25% teraz 65cm. Tylko woda przy podlewaniu.
Likes
11
Share