Likes
Comments
Share
@Mrg7667
Follow
Day 74 and there getting chopped today! I thought the harvest was going to be broken into two separate weeks considering the times on the Choco was listed about 7-10 days sooner then the DD (wich was listed at 70 days for flowering) However looking at the tricombs on the Chocolate Marshmallow most pheno didnt start getting amber untill the DDs did as well! A couple DD pheno could have maybe gone a couple more days but we will see! Going for reveg on all the pheno, since i didnt get to take any clones. We will see how it goes!
Likes
153
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 We start to be really close to the end, Buds look delicious 😋, leaves turn to purple, she's wonderfull this litle Epsilon 💜 I'll start flush, next watering, Pistil are milky (video), Harvest maybe next week end ✂️. 💧 Give water each 2/3 days. 1,5l Water + RQS Bio Flo Pack 1.5l Water + RQS Bio Flo Pack + Sugar Royal PH @6 - Bio Flowering Booster Pack Thicker Flowers 1 ml/l Bigger Flowers 1 ml/l Sweeter Flower 1 ml/l 💡Mars Hydro - SP 3000 100% 57 cm. 🔥 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾💚🌲. Mars Hydro - SP 3000 💡💡 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light RQS - Epsilon F1🌲🌲 https://www.royalqueenseeds.com/f1-hybrid-cannabis-seeds/620-epsilon-f1.html
Likes
20
Share
Really enjoyed growing this strain , she has very nice taste like fruits🍍and candy 🍬 and a hint of gas ⛽️ hard hitting too
Likes
14
Share
The Sensi Seeds Research breeding project has created eleven cannabis seed varieties. How? By combining new cannabis cultivars with a selection of strains from their long-established cannabis gene bank. For the first time in thirty-six years, they are opening the doors of the Sensi Seeds Research and Development Department. Week #10 Week #1 of Flowering, plants have filled up the trellis. After 1 week of 12 hours of dark period, the stretch is going to start now. This is where you must keep using your Veg nootz and where you must increase slightly the Nitrogen, to avoid any die back situation where your plants turns yellow from the bottom to the top, during week 3 or 4 of flowering due to a lack of Nitrogen... ( does this tip deserve a hit on the like button ? ) 😊👍 I definitely recommend Mars-Hydro , the plants under the SP250 are developing some spectacular structures of side branches and tops, it’s a bit like growing under natural sunlight 😎 Canopy is almost at the same level, I have put some few crazy tops under the second layer of the trellis to put everyone at the same size. Stay tuned folks ! The serious part of the game is coming, this is where it starts to get interesting to grow Marijuana 😉 (I’m looking for a job in the Cannabis industry as Master Grower, Mineralogist, Quality Control)
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.
Likes
6
Share
30.10.2025 The last week has been a chilled grow. Before yesterday I turned up the light intensity to 450 and yesterday to nearly 500 mol. They are struggeling a bit but they hopefully will recover soon, bathing in sunlight and best conditions. Now the truth will appear and they will show their sexes. Actually I really hope that both will be female. What do you think? 01.11.2025 As predicted the big one is a male and as I changed my mind I seperated him from them and left him at my window in another room. Maybe he manages to go on so I can collect some pollum? What a pitty because he really is a very precious plant!
Likes
9
Share
Cut the plants down on the 24th of April, drying room levels are 72°F and around 60%RH, I'm currently on Day #14 of drying and the buds don't feel fully dry yet, the main tops feel crunchy and dry but the lower smaller buds are still quite moist and smell like chlorophyll, I think I may harvest the main tops so I don't overdry and leave the rest in the tent for another few days, either that or put the rest of the buds in a brown paper bag to finish drying. Finished dry trimming the plant ended up with 200 grams dry weight not including trim there's another 2 ounces of trim which if you want to include that would bring the total weight from this 250W LED to 256 grams. I'm super happy with the result of this especially for my first grow and from one autoflower, it can only get better from here on out. FYI Not sure why I can't edit the lights I used but the bloomgro 600W LED is PULLING AN ACTUAL 250W FROM THE WALL so the gram/watt should be .8g/W
Likes
8
Share
@Fyno_TH
Follow
🌸 Flowering Week 5 — Solo Queen Still Standing 👑 Tough week but the mission continues 🌿💪 One plant didn’t make it earlier, so now all focus goes to the remaining Queen. She’s holding up strong — stacking dense buds and shining beautifully under the Spider Farmer G3000 💡 Switched fully to Athena Bloom (2 ml/L) after running out of Florex, and it’s working great so far — tighter buds, stronger pistil growth, and that classic King’s Juice aroma starting to roll in 🍊✨ Feed (per L): • Corex – 1 ml • Mira – 0.5 ml (pH adjust) • Aurora – 1 ml • Oxyroot – 1.5 ml • Bud Candy – 2 ml • Terpinator – 5 ml/gal (~1.3 ml/L) • Athena Bloom – 2 ml 💧 ~15 L each with 10–20 % runoff ⚗️ PPM: 1760 | EC: 3.5 | pH: 6.0 🌡️ Temp: 26–28 °C (day) / 23 °C (night) 💧 RH: 45–50 %
Likes
3
Share
@Rick_Root
Follow
In der fünften Woche habe ich es gewagt. Nachdem ich die Weiße Witwe schon etwas trainiert habe, wurde sie jetzt auch oberhalb des fünften Sprossknotens abgeschnitten. Dazu habe ich meine Nagelschere benutzt (siehe Video), mit der ich mir auch die Fußnägel schneide. 😅 Dann wurde die unterste Nodi noch entfernt. Jetzt hat sie noch vier Nodien übrig, die zu acht Blütenstände wachsen sollen. Es war das erste Mal, dass ich eine Pflanze getoppt habe. Um sie besser runter binden zu können, habe ich einen Haselnusszweig quer über den Topf befestigt. Das macht das Festbinden um einiges leichter. Die Cherry-Lady lasse ich ohne Training etc. wachsen. Sie ist aktuell ca. 40 Zentimeter hoch. Hier werde ich in den nächsten Tagen nur etwas entlauben. Die untersten Blätter können abgemacht werden. Sie sehen nicht sehr gut aus. Die Kirschen-Lady kann auch einen größeren Topf vertragen. Sie wird bald umgetopft. Der PH-Wert der Supermarkt-Blumenerde ist mit etwa 8 zu hoch. Der Idealwert liegt zwischen 6 und 7. Ich werde dafür Rhododendron- und Hortensienerde besorgen. Damit wird ein eigener Mix hergestellt. Solange bleibt sie aber noch in ihrem kleinen Topf, dem ich einen Mantel verpasst habe. Der Jutebeutel soll die Pflanze vor den Trauermücken schützen. Das abgeschnittene Teil der White Widow wird versuchsweise in einen kleinen Anzuchtbehälter gesteckt und ordentlich nass gehalten. Ich bin gespannt, ob es mir gelingt, die Pflanze zu klonen. peace & love
Likes
5
Share
The second defoliation of the bloom phase is done, and she’s already looking overwhelming in the best possible way. The canopy is packed with healthy tops, and opening her up revealed just how many bud sites are developing underneath. She took the defoliation like an absolute champ and barely seemed to notice it. Within no time she was praying again and pushing fresh growth everywhere. I’m getting really hyped for the weeks ahead. The structure is exactly where I wanted it to be, and she keeps responding perfectly to everything I throw at her. One thing she made very clear: she does not appreciate water-only feedings. I gave her plain water once, and she immediately let me know she wasn’t happy about it. Safe to say I won’t be making that mistake again.🙂‍↕️😂
Likes
Comments
Share
Likes
15
Share
@Nmatz
Follow
No disease & easy strain to grow so far (even for beginners) Got some little balls in the lower buds sadly but the tase, smell & high are so epic that i dont care 🤪 Some friends described the taste as something like pepper, others as something like lavender, but hey, we smokin on killer weed :o Lovely dense buds covered in trichs ty HSO
Likes
32
Share
@Splashy
Follow
24.04.2026 Heute habe ich mich dazu entschlossen die Damen zu ernten. der Hauptpunkt welcher mich jetzt dazu gebracht hat zu ernten waren die trichome, es sind jetzt auf jeder Pflanze Bernstein farben zu erkennen. sie trinken auch nicht mehr all zu viel und ich musste am Ende nur noch alle 3 tage gießen anstatt alle 2 Tagen. sie sind jetzt grob getrimmt und trocknen und curen jetzt in der vcure von vivosun. ich werde noch mehr Bilder machen, sobald sie fertig sind. freue mich schon auf das Ergebnis. die buds werden jetzt 5 Tage getrocknet und dann 9 Tage gecured, also gibt es in 14 Tagen neue Bilder. ich wünsche allen die bei dem Contest mit machen viel glück und einen guten grow, am Ende sind wir alle Gewinner eines guten grows. danke an zamnesia und plagron für das bereitstellen der Samen und des düngers. es gab mir Mal die Chance einen Strain von zamnesia zu testen und in den dünger von plagron rein zu schnuppern. hat mir beides gefallen und ich werde drauf zurück greifen in Zukunft, ganz sicher.
Likes
17
Share
@Kirsten
Follow
26.1.25: I have had a mistake 😕 I spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Bubble Kush
Likes
23
Share
Primeras semanas de flores.passaggio da 18/6 a 12/12 .adesso care piante sacre mie, ora datemi dei bei fiori per la mia terapia ...Om namah shivaya 🙏
Likes
26
Share
Sun Dec 27 Witnessing a true Stretch heading into week 2 of flower. Hoping to keep Veg Nutrients high this week, and be prepared to switch/transition into the Flowering formulas at the sight of “Hairs” being formed on bud sites. -switched the direction of my light, to make the most efficient use of the light hood itself. Sticking with the diagonal set-up in the tent. Mon; chemistry is listed above ***plant was originally super-cropped between the 3rd & 4th node, there’s not much room underneath*** 4th / 5th node might be worth considering next time. - soil / sand-coating seems really dry. This 2nd week will see feeding every other day. Nutes will remain as is Until there’s changes ** Uv-B was brought to my attention a few weeks ago, (thx DoDrugs420) and I am going to run a side by side test on it. Later this week I plan to install a 18” uv-b tube above one of the two plants, for the duration of Flower. *** Working with stakes again is kinda fun. But I also remember nearly poking my eye out several times with them. Safety glasses and Marking the Ends of the Stakes is a really good method of preventing accidents *** Wed Dec 30th - Food includes Unsulphured Molasses tonight. Still including it every third watering/feeding -Going to wait one more feed before adding some bloom nutes. Crazy growth and activity at the bud sites. And no groups of gangly hairs Thurs Dec 31st “happy new year all !” Next feed will feature half Bloom half Veg nutes and will be on Jan 2nd -Uv-B bulb installed ~ 14” from angled canopy... -running it on a reduced schedule right now. 2 x 3 hours per nite till I get to see how the leaves like it Recommended **12 hr CMH / LED etc. = 8 hr Uv-B** - Uv-B Bulb found at a Pet Store ~ $34 cdn and a simple black light fixture ~ $33 got it up and running. UV-B light is Not to be viewed... it’s dangerous to human eyes / skin. Jan 1. Moving to Bloom food! New growth and the arrival of Hairs on both plants will see me start to change their diet. Tonight the first Bloom food will be given and the transition will be over 3 feeds. 1/3, 2/3 and full bloom recommendation. (Opposite with Medi-One) 2/3, 1/3, 0 -plants had many branches that needed to be repositioned and LST applied. Canopy was releveled. Cleaned out some useless leaves from the undercarriage -what a great way to start the new year. Having a tremendous grow... -going to slowly start pulling back on the Rapid Start, now that we are entering true flower stage. (4ml/gal down to 1.0-1.5ml/g by the end of week 6) Same goes for CaliMagic. I’ve taken it higher than previously, (5ml vs 2ml ) and the results are obvious. Time to let these numbers drop a bit, make room for Bloom.
Processing
Likes
Comments
Share
@Amiro0o
Follow
Grows very fast in compare to other special queen's that i started 2 weeks earlier. Its 25 days from seed.and much bigger than the others.. Im going to try low stress training but i dont know if its a right time or not. It s my first grow indoor And i will be happy with some help from old Growers..