🌿 Week 4 – Purple CousKush Auto #12 | Plant B The Quiet Strategist Begins Her Move | 8×8 Adventure Every plant has its own story, even when they share the same tent, the same light, the same feeding schedule, and the same care. That’s one of the reasons I decided to document each phenotype individually throughout this 8×8 Adventure. Every seed carries its own personality, its own pace, and its own way of expressing the genetics hidden inside. Today the spotlight belongs to Purple CousKush Auto #12 – Plant B. While a couple of her sisters are already sprinting into flower much earlier than expected, this lady is taking a slightly more measured approach. She’s clearly entering pre-flower, showing her first pistils and announcing that the transition has begun, but she’s doing it on her own schedule. There’s no rush here… just steady, confident progress. And honestly… I like that. Sometimes the plants that don’t demand attention early become some of the most rewarding later on. ⸻ 🌱 Life inside the 8×8 Adventure The room continues running under the 12/12 From Seed experiment, a method that constantly surprises me with how differently each cultivar reacts. Even under identical environmental conditions, every plant interprets that limited photoperiod in its own way. Some immediately focus on reproduction while others continue building structure before committing fully to flowering. Purple CousKush B seems to belong to the second group. She continues investing energy into producing new growth while gently stacking pre-flowers across the upper nodes. Watching these differences unfold is exactly why I enjoy documenting every individual plant instead of only reporting on the room as a whole. ⸻ 🌿 Training without forcing nature This week has mostly been about leaf tucking and a little gentle Low Stress Training. Rather than removing healthy fan leaves, I’ve simply been moving them out of the way to expose lower growth sites to the LED. It’s amazing how much additional light reaches the interior of the plant with just a few careful adjustments. LST continues following the same philosophy. No aggressive bends. No unnecessary stress. Just guiding branches into better positions so the canopy can develop naturally while allowing more future flowering sites to receive direct light. With autoflowers, timing is everything. Every day counts, so I prefer making small corrections instead of major interventions. Purple CousKush B has responded beautifully, opening her structure while continuing to push healthy new shoots from every direction. ⸻ ☀️ Summer is definitely here… The biggest challenge this week hasn’t been nutrition. It hasn’t been watering. It hasn’t been training. It’s simply been the weather. Outside temperatures continue climbing, making it surprisingly difficult to keep the grow room perfectly stable—even with the air conditioning working around the clock. Despite seeing daytime temperatures touching 33°C, humidity has remained reasonably controlled, helping prevent excessive stress while maintaining healthy transpiration. Considering the conditions, I’m genuinely happy with how all the ladies are responding. Strong stems. Healthy green foliage. Excellent turgor. No signs of heat damage beyond the normal environmental challenge that summer inevitably brings. Sometimes growing isn’t about chasing perfect numbers… It’s about adapting and helping the plants stay comfortable despite Mother Nature trying to make things interesting. ⸻ 💧 Week 4 Feeding The feeding schedule remains simple and consistent: • Terra Grow — 1.8 ml/L • Power Roots — 1 ml/L • Pure Zym — 1 ml/L • Sugar Royal — 1 ml/L Solution parameters: • EC: 1.35 mS/cm • pH: 6.1 The plants continue responding extremely well, with lush green foliage and vigorous new growth showing that the nutrition remains well balanced. ⸻ 🌸 Looking ahead With pre-flower now clearly underway, I’m expecting Purple CousKush B to begin stretching over the next week. Unlike some of her faster sisters, she’s building a slightly more open architecture before committing fully to flowering, which could translate into excellent light penetration later in bloom. Every day brings another surprise inside this tent, and that’s exactly what makes this project so enjoyable. One room. One environment. One feeding program. Yet every phenotype writes its own story. I can’t wait to see what chapter Purple CousKush B has planned next. ⸻ As always, a massive thank you to everyone following this adventure, leaving comments, sharing knowledge, and supporting these journals week after week. Your encouragement genuinely makes documenting every phenotype worthwhile. A huge thank you as well to Plagron for the outstanding nutrition, Zamnesia for the incredible genetics, and everyone helping make this 8×8 Adventure possible. Growers Love and see you all next week for another chapter. 🌱💚

now is that time of the harvest that you can see change day by day on buds... love it this phase.. 😀

Week 6 of flowering 10/23/24 Changed nutrients to fit week 6 Buds are getting even bigger and thicker. Defoliated a little. Noticed a PH of 4.8 in runoff, same as the late stage of flower in my previous grow. After lowering feed EC, CalMag on max strength, flushing with 0.8ec nutes for 3 days in a row, nothing changed and PH stayed the same. Read in a forum thread about constant low PH in the rootzone when growing in coco. Got great info about CEC, water, nutrients and little chemistry from a detailed explanation. (https://www.icmag.com/threads/recurring-problem-with-low-ph-in-coco.338385/page-2#post-10843765) Flushed plants with tap water + calmag, PH 6.5. Used 120L total for 4 plants in 2 days. 1st day: flushed after lights on, did not water until 2 hours before lights off and flushed again. Runoff PH went up a little, but not to the correct range. 2nd day: flushed after lights on and checked runoff EC + PH, of each plant. Fortunately, PH got corrected to 5.8, and I returned to automatic watering 4 times a day (with 10%-20% runoff). Thoughts: In the last grow, I thought I had a problem because of salts buildup in the media with constantly low PH in late flower. I didn't fully correct the problem till chop day. Same problem here in the same stage of flower without the salt buildup. After reading every forum I could find about the problem, I understood that my bloom nutes were the main problem because of their chemical composition. The coco ability to exchange ions lead to the low PH in the rootzone. It got worse quickly because I did not use any tap water with the feedings, so the PH could swing easily and drastically without resistance. After I looked online for the T.A. feeding chart, I saw they used TriPart Grow till week 7 of flower, the Nitrogen type they are using will up the PH. CocoForCannabis chart that I'm using, has not enough nitrogen to combat the bloom nutes PH down effect in flower. It gets even worse with RO water because there are no minerals that can resist PH down. Now I'm using 30% tap water with rest RO water, T.A. TriPart feeding chart with calmag and silica. Hopefully I have corrected the problem for the rest of the grow. It wasn't easy, because there were lots of variables that worsened the problem quickly. Now I'm checking runoff PH and EC daily. Update on next week :)

She's coming on beautifully switching to flower sometime this week so it doesn't get to crammed in there hopefully. did the final bits of tieing added the second hps last week and will begin with buddy and terpinator tomorrow thanks for reading happy growing guys

Plant grew well outside if a little rot issue. Was operator error. She grew well under the Mars Hydro FC4800, with the Athena blended line nutrition. A berry sour smell with lots of frost. She should be a good 4 to 5 ounces once done. I did use mire then Athena recommend in flowering. I will be back with smoke report in a few months. Thank you Mars Hydro, Athena, and Weed Seed Express. 🤜🤛🌱❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Things are going well. Very good root growth. The two new main stems have grown enough to be tied down for Low Stress Training. I don't think I'll top again. I want to see how fast I can get a good canopy with DWC, and see if Manifold-style training can get me a similar shape to the Mainline I did last year where I lost a ton of time from topping 4 times and doing a bunch of pruning to maintain a certain shape. I set the lights to 18/6 to encourage some rest and regrowth, and frankly to save myself a bit of light and noise at night. The reservoir is still full so I'm going to leave it this week and change out the water next week. The leaves are looking a bit stressed so I raised the light and moved the fan back a bit. I have a window fan pulling air out while there's no smell but I think I'll need to switch that to intake, turn on the exhaust and replace the jet with an oscillating fan. There is a fan on the cool tube for my light as well. I think I need to hang something heavier on the front to dampen the sound. All the fans are getting loud for my small apartment. Lol I topped it again the next day. I have wires tying down all the main branches. I think it's worthwhile to spend the time in veg making a good canopy. I'm following the instructions for Nebula's Manifold technique but I haven't done any pruning yet except for the topping itself. I have a vision of what I want taking form. June 16 I checked the pH and it was 6.5 so I brought it down to 5.5. I'm going to change out the water and nutes tomorrow. It needs a top-up so I'll just change out the whole thing tomorrow. I'm leaving out a bucket of water overnight for the chlorine to evaporate.

🇩🇪 Zum trocknen habe ich die Pflanze in drei Teile geteilt und sie leicht vorgetrimmt (Fanleafs ab) an Kleiderbügeln im Zelt aufgehangen. 13 Tage bei 62% Luftfeuchtigkeit und 23 Grad 🇺🇸 To dry, I divided the plant into three parts and lightly pre-trimmed it (removing fan leaves), then hung it on hangers in the tent. It dried for 13 days at 62% humidity and 23°C. 🇪🇸 Para secar, dividí la planta en tres partes y la pre-podé ligeramente (eliminando las hojas grandes), luego la colgué en perchas en la tienda. Se secó durante 13 días a 62% de humedad y 23°C.

Hey fellow green thumbs! 🌿💚 We’ve just wrapped up the fifth week of flowering with our Auto Fast Pete and Auto Northern Dragon Fuel from Super Sativa Seed Club. This week has been all about resilience and adaptation as our plants continue to push through the challenges. Let’s dive into the details! 🌟 Week 9 (Fifth Week of Flower) Progress: Day 57-59: Bud Development and Resilience • Auto Fast Pete: Despite the ongoing stress and burned leaves, Pete’s buds are continuing to bulk up. The aroma is rich and potent, filling the grow room with a delightful scent. The resilience of this plant is truly remarkable. 🌿🌸 • Auto Northern Dragon Fuel: Dragon Fuel is also showing strong bud development, with sticky, dense flowers. The burned leaves persist, but the plant’s overall vigor remains impressive. 🌱✨ Day 60-62: Growing with the Flow • Nutrient Strategy: Continuing with the adjusted nutrient regimen, including increased CalMag to support the plants through the stress. Monitoring the plants closely to see how they respond to these adjustments. 🌿 • Reservoir Details: • TDS: 450 • Temperature: 18°C • pH: 6.2 • Environmental Conditions: • Temperature: 31°C • Humidity: 51% Maintaining these conditions to optimize bud development and plant health. 🌡️💧 Day 63: Observing and Embracing the Journey • Auto Fast Pete: The buds are continuing to grow and mature. The plant’s resilience in the face of stress is truly inspiring. 🌿🌼 • Auto Northern Dragon Fuel: The bud sites are dense and sticky, and the plant is showing incredible strength. Despite the burned leaves, the flowers are developing beautifully. 🌱🌟 🌟 Care Tips: • Light: Maintaining the 12/12 light schedule. The plants are adapting to this schedule, and we’re keeping a close eye on their response. 💡 • Autopot System: The Autopot system ensures a steady water supply, reducing the need for frequent manual watering. This system is great for maintaining consistent soil moisture, which is crucial during the flowering phase. 🌊 • Nutrient Monitoring: Continuing with the increased CalMag dose to address deficiencies. Keeping an eye on the reservoir’s TDS and pH levels to ensure the plants receive the right amount of nutrients and minerals. 🌿 • Environment Control: Maintaining a stable temperature of 31°C and humidity around 51% to create the perfect conditions for flowering. Adjusting airflow and positioning to optimize plant health. 🌡️💧 🌟 Genetics Spotlight: Auto Fast Pete: • Characteristics: Rapid bud development, strong structure, early resin production, but showing signs of stress and possible nutrient deficiencies. This strain is still pushing through with impressive bud bulk. • Future Expectations: Continued bud swelling and resin production. Monitoring nutrient adjustments closely to ensure a healthy finish. Auto Northern Dragon Fuel: • Characteristics: Robust structure, dense bud sites, resilience, but also showing stress signs and possible CalMag deficiency. The buds are still developing beautifully. • Future Expectations: Significant bud growth and increased resin production. Close monitoring and adjustments will support a strong finish. 🌍🌿 Fun Fact: Did you know? 🌿✨ Plants are incredibly resilient and can adapt to a variety of stressors. This resilience is especially important during the flowering phase when the plants are focusing their energy on bud production. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week has been particularly challenging and exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Week 9 marks the fifth week of flowering, with both Auto Fast Pete and Auto Northern Dragon Fuel showing remarkable progress despite some stress and deficiencies. The buds are developing beautifully, and with careful monitoring and adjustments, we’re set for a promising harvest. Stay tuned for Week 10, and happy growing! 🌿💚✨ #SuperSativaSeedClub #Week9Report #FastPete #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney Germination method 🌱 @thecannakan Genetics @supersativaseedclub_official Nutrition @aptusholland 🌿 @aptus_world 🌎 @aptus_es 🌍 @aptusbrasil 🌱 @aptus_thailand 🌿 @aptus_portugal 🌳 @aptususa_official 🍀 @aptusplanttechnz 🌺 @aptusplanttechaus 🍃 Ambient controls🎮 @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro Soil @promix_growers_eur @promix_cannabis LED - @lumatekeu Watering- @autopot_usa @autopot_global Love and attention- @dogdoctorofficial As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 More info and complete updates from all my adventures can be found ⬆️link in the profile description ⬆️ Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All 💚 Discount Codes : @thecannakan DOGDOCTOR 15% off @theneutralizer PORKIT5-DOG 15% off @kannabiaglobal DOGDOCTOR 30% off @seedsmangenetics DOGDOCTOR 10%off @terpyz.mutant.genetics DOCTOR 15% off

And within less than 40 days she was full on flowering.... How fast will I be able to finish her?

This girl is doing awesome. She has completly taken over that corner of the tent 100%. She is a funky plant you can see how her leafs just stick close to her main stem along with her branches its a weird pheno its time to flower her and see what we get!. Will give her a hair cut/ defoliation over this next week so the light can "penetrate" her more. She is getting a heavy dose of nutrients from canna and my my she has just exploded. Still keep it at 5.6-5.7 PH and about 3 L of food every 2 days for her. Released some more lady's in there just to make sure no cross contamination is going on from other flower tent. Have soaked the garage in bleach almost died!!! Don't smell bleach when u spray in container and see mist in there!!! DUH now whem I open twnt floor is soaked in bleach and make sure clothes are clean. Learn from ur mistakes and move forward in a running motion!!! Stay tuned it's gana get frostyyyy

Nice! Let's say I look forward more to smoking it than trimming it The tops have some different shapes because I used the "back building" technique I'll add some more pictures on tuesday. You can right click and open the image in a new window to get a better look

12/25/2023-Germination Day 1 Merry X-mas 2023 I decided to start a run of SolFIre Gardens Hoodz Candyz S1. I am going to do a cup filled with RO water a touch of Hydrogen peroxide and let it sit for 24-48 hours until I see tap root then I am going to put it into a rapid rooter.. Tap root Down and put it about 1/4 of the say down the Rapid rooter. I made some modifications to my basket on this run.. I have taken a few Pods that I use for my cloning machine and decided that I am going to try and use them as sure plants, so that I can take my water right up to the bottom of the basket this time and see if these can make my planting more consistent.   12/26/2023-Germination Day 2 Tap root achieved Planting Commencing 12/27/2023-Germination Day 3 Misted the dome lightly misted the rapid rooter and added a little water to the bottom of the pan to encourage root growth to the pan. 12/28/2023-Germination Day 4 Ground Hogs day 12/29/2023- Germination Day 5 She is up, she has broken surface, I misted the root riot, and around the bottom of the tray to try and entice root growth down rapidly. 12/31/2023- Germination Day 6 Ground Hogs Day 1/1/2024-Germination Day 7 HAPPY NEW YEARS!!.. I did it I planned it out so my planting day would fall on New Years and it worked.. Yay!!! 1/2/2024- Germination Day 8 Since the roots are not to the water yet, I am pouring one cup of water lightly on the hydroton around the lady to try and encourage root growth down to the water.. 1/3/2024- Germination Day 9 Ground Hogs day, will continue until roots hit the water. 1/4/2024- Germination Day 10 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/5/2024- Germination Day 11 Ground Hogs day, will continue until roots hit the water. I am going to change the water Sunday and kick off Week 1, I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 12 Ground Hogs day, will continue until roots hit the water. I will just continue to top feed until roots are in the water.. Shouldn't be more than a few more days. 1/6/2024- Germination Day 13 Ground Hogs day, will continue until roots hit the water. 1/7/2024- Germination Day 14 Ground Hogs day, will continue until roots hit the water.

14/08/2023 Nothing special to mention at the beginning of this week, except my new heat/humidity detector, which is actually an old device I found. I came across it because my little one doesn't seem very reliable anymore(As you can see on a picture it say 69% while the other big one say 45%). Still no nutriments, just water with pH-. And I think I won't make any more changes until the final weeks, when I'll probably trim a maximum of leaves. 17/08/2023 I redid the LST for number 3, without knowing what I was doing, and I'm not sure if I did it right, but I'm pretty happy with the result. The canopy of #3 looks really good, even though the overall canopy is quite uneven. However, doing the LST on all 4 plants intimidated me way too much. So I changed the position of each plant so that they wouldn't encroach too much on each other; I only have a space of 60cmx60cm.

Started from seed this lady's have 17 days under half load 4 X 50W Cree CXB3590 CRI 80 3000K custom build led. 7days in rockwool cube under a dome , 10 days in 750ml pot. Freshly transplanted into to final pot. They have received 250ml of fertilizer solution and transplation soil was moisted with 6.5PH water. Led now running on full load. This project have some custom/extra gadget, a prototype growing controler. Hardware Specs: Raspberry PI 4 4Go Ram + SSD 120Go Phat sparkfun qwiic i2c hub + i2c sensor for : temperature,humidity, co2, tvoc, air pressure and distance measurement(plant height) Linked with one custom wifi power bar for schedule and countdown. One sonoff pw r2 for energy monitoring. Both using ESP8266 chip and running on Tasmota alternative firmware. Linked to the controler using normal wifi AP. From Wall|----Sonoff-----Powerbar---: Led, Extraction Fan, Mouvement Fan, and the Rpi4 Software: Exploitation System: Custom Linux Buster Lite OpenHab : Open source domotic software for visualition and automation. Mosquito MQTT +TLS server : Used to publish and receive message/data from sensor etc. InfluxDB : DataBase for data retention Chronograph: Visualisation and transformation panel to analyse our data. Custom python code for running the sensor and publishing result into mqtt channel Chronograph have monitoring panel for now The growroom Sensor AkA spaceship The system sensor and hardware/computer monitoring : Memory, Disk space, CPU load and temperature. In/Out etc. Network etc The database: request per db ,memory heap, disk usage, http request etc. Working : Co2, humidty,temperature, Tvoc, Current,Voltage, Power, Daily/yesterday/Total energy consumption on kWh and $ Planned in version 1.0 : Mesuring plants height using ultrsonic sensor. Adding remote On/Off function on sensor using openhab. Adding power schedule in openhab. Adding basic automatic watering/dosing system, Planned In version 2: Adding relay and dimmer on the custom led to control/dim each cob. Adding custom small emerson effect led based on 3W led. Adding , automatic, PH, PPM and temperature monitoring for water/fertilizer. Adding PAR sensor for light monitoring. Adding soil moisture and PH sensor. ============================================ 2020-05-07 ============================================ Added security cam for streaming with rtsp, working on http conversion for addition in openhab Added snapshot. CO2 sensor down, some resoldering needed. =============================== ================================= 2020-05-08 =============================== Good: Updating fertilizer quantity from 250ml/day to 500ml. Watering planned for the end of the day. 2 days ago i've pinched the head of each plant Internode are booming. Started LST training s to help the lower internode. Bad: Noted some physiological/Nonparasitic leaf Roll on one plant ; humidify level is too low; Humidificator filter is broken, need to be replaced. Monitoring #4 for couples of days.

@twenty20mendocino Ateam R&D Update ~ Let’s go day 91 an these girls are doing amazing! Looking nice an healthy we will let these girls recover for a few more days from the heavy defoliation and on Sunday we will be giving them the big flip , Let’s go flower!! Updates coming soon ! Sangria has been doing her thing , been drying for12 days now so Sunday we will be giving her the trim and jar her up, but updates coming soon yall!! Let’s have an amazing productive day as well as a great safe weekend, peace love an positive vibes to y’all Cheers an blaze on 😶‍🌫️💨💨💨💨

went from 15 to 14 and then to 12 h - after second defoil in a few days and a 24 H lightday after that. 250 Watt HDL reactivated. Now giving them 6h 240W LED (1300PPFD) and 6 h 250 W HDL (1400PPFD) with 1h overlapp. Now using all of the Hesistuff like in the Plan : Root, Enzym, TNT, Phosphor, Bloom, Booster + Vitamins. Dripper overwatered a bit - back to handfeeding it. The Amnesia is now ca 2 Weeks behind the GG4 Auto with the bloom, i hope i can stretch it to at least 4 weeks. With the 12/12 light she should start to flower in the next days. But 3-4 Weeks would also be ok. plants seems happy with the haircut and the new lightsituation. room cleaned. - the LEDS are not as good as the HDL , they make a bit more PPFD from distance, but in shorter range and with good Fans the HDL is way better for the plant. Have to build a small Box for the veg phase of small plants and one for a motherplant & cloning.

Week 15 (9-6 t/m 15-6) 9-6 Temperatuur: 30.8 graden (licht aan) 22.2 graden (licht uit) Luchtvochtigheid: 66% (hoogste) 40% (laagste) De toppen beginnen al wat dikker te worden, en de geur is nu ook erg aanwezig, het gaat de goede kant op! Watergift: 1000 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1.3 gr Calcium PowderFeeding per liter. EC: 0.7 PH: 6.5 10-6 Temperatuur: 32.2 graden (licht aan) 23.2 graden (licht uit) Luchtvochtigheid: 62% (hoogste) 44% (laagste) Vandaag de lamp op 95% sterkte gezet. Watergift: 1500 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1.3 gr Calcium PowderFeeding per liter. EC: 0.7 PH: 6.4 11-6 Temperatuur: 31.4 graden (licht aan) 24 graden (licht uit) Luchtvochtigheid: 70% (hoogste) 45% (laagste) Watergift: 1500 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1.3 gr Calcium, 0.5 gr Hybrids en 0.5 gr PK+ PowderFeeding per liter. EC: 1.7 PH: 6.4 12-6 Temperatuur: 31.7 graden (licht aan) 24.5 graden (licht uit) Luchtvochtigheid: 62% (hoogste) 39% (laagste) Watergift: Geen. 13-6 Temperatuur: 31.7 graden (licht aan) 24.4 graden (licht uit) Luchtvochtigheid: 50% (hoogste) 35% (laagste) Watergift: 1250 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1.3 gr Calcium PowderFeeding per liter. EC: 0.7 PH: 6.4 14-6 Temperatuur: 32.3 graden (licht aan) 23.7 graden (licht uit) Luchtvochtigheid: 50% (hoogste) 35% (laagste) Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1.3 gr Calcium en 0.25 gr PK+ PowderFeeding per liter. EC: 1.0 PH: 6.4 15-6 Temperatuur: 31.6 graden (licht aan) 23.4 graden (licht uit) Luchtvochtigheid: 54% (hoogste) 37% (laagste) Nu nog 2 weken te gaan! 😁 Watergift: 1100 ml, met 0.2 ml Silica Power per liter, 0.3 ml CalMag per liter en 1.3 gr Calcium PowderFeeding per liter. EC: 0.8 PH: 6.4