The Grow Awards 2026 🏆
Likes
4
Share
Mar 31st Week 16 Mar 30th changed nutrients First 2 days will be straight Dense Bud Compactor @ 900-1000 ppm I use 1 gram / litre On April 1st I will add all other nutrients to the existing solution and check ppm level is not to strong April 1st Changed nutrients from straight Dense Bud Compactor to a full nutrient mix I used 8 litres of fresh water + 6 litres of the Dense Bud solution to make a mixer that is @ 1100 ppm
Likes
41
Share
The plant is stretching very fast. It's very healthy. It's a nice plant, very vigorously and lot of ramifications.
Likes
21
Share
A-Week 10(Day 74), B&C-Week 10(Day70) A- Still fattening up, took a Growmie’s advice, she was a little over fed, eased back this week on the nutrients and just used water and Sensi CalMag Extra. Gave her a regular dose Friday and she seems good, no new discoloured/burnt leaves. Tricomes are still showing as clear and cloudy mixed in with a few amber here and there. Watching closely to when I feel she is done, then I will start a water flush cycle for the last few feeds… B- Is looking great, doesn’t seem to have slowed down one bit, hard to tell sometimes when you are looking at them so frequently, but week to week you can see the stack grow 😍 Defoliated a little, and pulled her branches down a bit to let in more light, otherwise she’s chugging along! C- Is making me wonder how much she will produce?! Big colas all around, from 10-14 inches long 🤩Stacking very well, and loving the Indo Nutrient line. She’s a big drinker, takes almost a full gallon every 2.5 days. I figure it will be at least 1-2 weeks longer to harvest than A… Happy Gardening Growmie’s 🌱😎💨
Likes
22
Share
Doubled the nutes and the plant grew 8" in a week span and its not in flower. I may have to transplant to 20 gallons next week if it is measured around 40". I did a lot of defoliating to get rid of some huge fan leaves covering up bud sites and I also trained a lot. She is very wide and almost 3ft tall with a lot of pulling down, I'm very pleased
Likes
9
Share
@Radagast_
Follow
26.07. Rainbow Sherbet 1# Day 92# Rainbow Sherbet 2# Day 90# Yesterday was the end of the thirteenth week for the plants. They are making good progress, they complain a little about this heat (rainbow has been complaining about both the heat and the cold since the beginning), but it started raining today and there will be rain and storms in the next few days, and it is expected to cool down and much more normal weather in the next 10 days. The temperature is 38 C, that's what the forecast says, the thermometer in the shade says 45, in the sun 60+ Stay High and Keep Growing!!!
Likes
20
Share
@GR0WER
Follow
👋Hello, my friend!👋 If You reading this, sign up to my profile, I will be pleased! I download new photos and comments updates every day! It will be nice to walk true this grow of my two Fast Buds 'Banana Purple Punch' auto flowers together! I asking a lot of grow questions and take part in a life of this grow community. New week starts! 🌞28.11.2022 Today I came home and saw my smaller one showing four stigmas in the upper knot. I was afraid of she already starts flowering, but mates from 'Grow questions' made me kalm, answering that she's just showing her gender. It's too early for flowering and thet's how all autos do. Thank You, my friends, You've saved my nerves (as usual). I have watered my girls with full pack of GHE nutrients, including 'GHE Diamond nectar' and 'GHE Mineral magic'. Solution ph: 6.0 Drenage ph: I forgot to drain vater from pot's bottom and after four hours it was gone. So I'll measure it next time. I've done some more LST and sprayed them with 'GHE SeaWeed'. 🌞29.11.2022 Today I asked one more grow question: 'Why all new brunches on my autu flowers has triple fingerd leaves?' Mates told me it's a fault of my substrate Ph and I can do some flushing to fix that. I took one on my girls (#1) and made this procedure deeping a whole pot in a bucket with 10 liters of ph5.9 water. Maybe it's some kind ob a black magic, but it did NOTHING. Inflow: ph5.9 Outflow: ph6.7 Substrate ph after 3 procedures: 6.9 I gave up. I'll not doing this to #2 and let them grow in that cursed substrate till the every end. I made small defoliation after all of this to bouth of my girls. Lowest leaves (first floor) was cut with a brunches growing from it. Also I cuted one fingered leaves of a first week. Results are on downloaded photos. 🌞30.11.2022 Photos downloaded. Mb its my mind tricks itself but I noticed #1 starts growing faster after flushing. It was smaller than #2 and now it's almost the same size and even looks thicker. Tomorrow we'll see it more closely and I'll flush #2 if it's true. I watered #2 with full pack of GHE and sprayed them bough with 'GHE SeeWeed'. Also my BPPa#2 showed her gender today (stigmas on a upper knot). Yep, we have a girl here! 🌞01.12.2022 It's a 'rest day' today. Nothing to wright. (Photos downloaded) 🌞02.12.2022 I made some LST and sprayed my flowers with 'GHE SeaWeed' solution. Substrate ph rised by ph0.1 and now it ph7. It's critical already, especially when my BPPa#1 starts to show stigmas everywhere - almost in every knot. I think pre-flowering starts soon. She looks soft and wobbly, I think there is a deficit of some elements. But my substrate still wet, and I can't do anything. Tomorrow I'll make them both to bath in ph5.5 nutrients solution - and it's only thing I can imagine to do now. Relying on the best, waiting for tomorrow. 🌞03.12.2022 Today I watered both of my plants with 'GHE' nutrients (TriPart + Fulvic acid + Roots stimulator + Selicates) and sprayed 'GHE SeaWeed' on the leaves. Also, I think I finally resolved my cuestion: 'Why ph of substrate don't want to go down?'. I take my water from kitchen crane, it has ~ppm110 and ~ph7.5. But clorine in this regular water slowly makes the reaction with asid I use to low it's ph. And slowly but surely ph of solution rises. I noticed this by making ph5.8 water and waighting 24hrs - ph of solution became 6.7 the next day. My previous grow I used distilled water only and thet's why I didn't know about this problem. It's a pity I made this guess so late. But it's better late then never. From now I will make ~ph5.2 water immediately after watering and it will react till next procedure (2 days). It's ph should rize above 0.9-1.0 by this time and become near ph6.0. I already prepared water for the next feeding - clear, without any nutrients (by now) and ph5.25 on it's start. Today my solution measurements looks like this: - Substrate ph before watering: ~7; - Solution ph: 5.8; - Solution ppm: 680; - Solution EC: 1.1; ... - Substrate ph after watering: ~6.9; - Drenage ph: 6.7; - Drenage ppm: 710; - Drenage EC: 1.03. 🌞04.12.2022 The 'rest day'. My experinent with water ph was sucssessful. Now I know how to treat usual water to feed my flowers correctly. My next grow will be nearly perfect. And also, it's my first (and last) grow using autoflowers seeds. I don't like a grow process ether a future results. Regular flowers are what I can grow the best. So I'll stay on a 'photo' side of a force (after this auto grow ends). Week ends.
Likes
3
Share
Plants are happy, 5th week of flower, but in my count it is only week 4. I only start to count actually once the first sign of budding appear. I have plants with fruity smell to the tropical side and some to the sweet side. Some plant still no distinct smell. On to the next week
Likes
6
Share
3 plants. 2 are are rather small at this point. 1 is pretty beefy.
Likes
9
Share
@CheeRz
Follow
The weather has been terrible, with lots of rain and extremely high humidity. That's why I decided to harvest. I will be able to provide more information about the flavor in a few weeks but the smell was sweet and fruity.
Likes
16
Share
@SAC87
Follow
Day 14: These little plants are just truckin along. They’re looking good. They seem a bit small, but are indica dominant so idk yet. I’m heading out of town for a couple days so they’ll get a heavy water and be left on cruise til I’m home. The Fast Buds from last round are curing up nicely and so powerful in potency and aroma. I’m pumped to see how these turn out. The XS2000 is providing a perfect amount of heat at 75% that it just takes a light misting to have these little plants right in the sweet spot for temps and humidity. I’ve said this a bunch, this is a powerful light so I have it set a bit higher than recommended but I want room for them to grow up into without stress. I’d rather have a bit of stretch to contend with rather than light stress. I’m excited to see how they look when I’m home. Hopefully quite a bit bigger!! Happy Growing 🌱
Likes
25
Share
Stopped feeding this week other than one watering with molasses. Needing to be watered every 3 days. Other waterings using ph'ed filtered water to 6.5 set on my air bubbler for a few hours before watering. She's very close to being ready. Another week and i think she will be perfect. Notice leaves fading end of last week and they have been getting more color throughout the week. Bud growth only happening closes to the light and much of orange hairs are white. Not a ton of amber trichomes yet which is good. Really liking how this plant is turning out. Nice loud terpene profile and fat dense frosty buds. Trimming should be pretty easy on this one which is a relief knowing how much work I have ahead of me. I think this very could be the fast version.
Likes
25
Share
@Kakui
Follow
Flower18, riego con 6.2 pH y EC 2.2, pequeña defoliación. Flower22, riego con 6.5 pH y 3.0 EC. Hoy las plantas me han sorprendido, están creciendo mucho sus flores, se están viendo muy llenas. Me preocupa que por el espacio muy justo, puedan generar hongos, tendré que colocar tutores para separar un poco las ramas y mejorar la ventilación poniendo 1 o 2 ventiladores extra, quizás darle más potencia al extractor también. A parte de eso van súper bien 😁
Likes
31
Share
@MxGrow
Follow
Feliz por como van mis gorilas, todos los días hay cambios y cada semana tengo que aumentar el riego, esta semana utilice en total 18 litros, 4.5 litros para cada planta aproximadamente. En los primeros 6 litros uso: ▪️︎4ml de Connoisseur A y B por litro de agua. ▪️︎2ml de Rhino por litro de agua. ▪️︎2ml de Bud Candy por litro de agua. ▪️︎2ml de Carboload por litro de agua. ▪️︎2ml de B-52 por litro de agua. Espero 30 minutos y despues aplico otros 6 litros con los siguientes nutrientes: ▪️︎4ml de Connoisseur A y B por litro de agua. ▪️︎2ml de Nirvana por litro de agua. ▪️︎2ml de Big Bud por litro de agua. ▪️︎2ml de Overdrive por litro de agua. ▪️︎2ml de Voodo Juice por litro de agua. No tengo medidor de EC, por lo tanto trato de que las mediciones en ml sean exactos con una jeringa. ☆ 1 día a la semana riego las plantas con 6 litros de agua sin nutrientes y con un PH en 6.0, hasta el momento no han presentado carencias pero tengo la duda si tienen exceso de nitrógeno por el color verde intenso de las hojas.
Likes
4
Share
Everything is doing good despite me not having ac at the moment! House has been staying at 85 degrees so the plants are happy at least. Plan on solving the ac issue by next week to start possibly flowering soon 🤞🤞. No health issues to report, just added another fx3 to the 3x3 to have 2 different phenos!
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Processing
Likes
17
Share
@kcartel
Follow
Preparing for next week, will face stress)))
Likes
2
Share
@TTerpz
Follow
4/22/25: last flush 2 tsp of sledgehammer with 1 gallon of water used 2 gallons between all three plants…more cool colors coming in with the fade 4/24/25: fed with recommended dosage for week 11 on my schedule card (day 31 of flower) 4/27/25: watered with plain ph water at 6.8