Likes
Comments
Share
At the end of this week we got to put these ladies outside to finish out the summer; finally! They have made a large jump in height; but we low stress trained them all down, now that they have ample space to do so. I had an accident with one of the plants while LST and ripped the main trunk a little bit at the topped knot, we repaired the rip with para film immediately; she seems to be recovering well, barely skipped a beat so far. We continued to water with ancient earth every watering, and I gave them a foliar spray of gaia green soluble seaweed extract the morning after their first night outside. They are acclimating well to their new permanent outdoor home. ☀️
Likes
6
Share
@Hidden
Follow
The end of week 9 of flowering arrives with no major structural changes, although the colas continue to thicken slightly, and the leaves are slowly taking on reddish hues. It seems unlikely that they’ll complete the full color transformation before harvest, but the visual progression is still beautiful to observe. No nutrients have been added this week—only filtered water through activated carbon, with the pH maintained between 6.3 and 6.4. This flushing phase helps to remove residual salts and fertilizers from the substrate, ensuring a cleaner and more natural final product. The trichomes are now showing a more pronounced milky coloration, though there are still relatively few with amber heads, indicating the plants haven’t quite reached full maturity yet. My plan is to wait until week 10, though I might harvest slightly earlier depending on how the trichomes evolve over the next few days. The aroma has become intense and complex—fruity, spicy, and fuel-like—suggesting a rich terpene profile with strong character. I’m genuinely excited to taste the outcome of this grow; after all the care and patience invested, anticipation is at its peak.
Likes
16
Share
@Le_Che
Follow
C’est partie pour le séchage je vous donnerais mon avis après la trim et le curring mais ça m’a l’air bien si vous avez suivie la session 🤩
Likes
13
Share
DIVINE OG KUSH / DIVINE SEEDS WEEK #6 OVERALL WEEK #5 VEG This week she's doing good recoveredfrom topping and fresh growth she's got a nice green color to her and hasn't had any issues this week. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you DIVINE SEEDS!! DIVINE OG KUSH / DIVINE SEEDS
Processing
Likes
23
Share
Plant is growing strong, good growth this week. Did a seaweed foliar spray earlier in the week. Thinking about one more week of veg then flipping this plant to 12/12 and start the flower. Thanks for looking.
Likes
14
Share
@MG2009
Follow
05/27/2021 Its been a while but all is well, the red light only seems to have encouraged lots of new growth. But I think I'm going to stick with 25-50% blue spectrum and 100% red for the finish. I'm kind of disappointed that she has no distinguishing smell, but she was bred for resistance to PM specifically. All the good stuff will come once i have stabilized consistent PM resistance. (Work in progress) Then the good stuff will be worked in..... If needed. Ps. I do believe it will likely be 12+ weeks of flowering to finish (Hope she has a racy/trippy sativa side) fingers crossed🙏
Likes
35
Share
28/04/2021 Ya comenzaron a comer muy bien! La semana que viene se agregan unas galponeras y luego se trasplanta a la cantela. Teniendo en cuenta la luna, estaríamos trasplantando el jueves o viernes de la semana próxima. 03/05/2021 Tres plantas de las mas viejas comenzaron a amarillentas un poco, se estima que fue por una alta temperatura el fin de semana. Veremos que sucede mañana al aplicar el combo de MEN de viejo brujo.
Likes
28
Share
The seeds of Red Pure CBD showed impressive vigor right from the start. After just 32 hours of being planted, they had successfully germinated, with small, healthy roots emerging from each seed. Following germination, the seedlings were given their first exposure to light at the 44-hour mark. At this stage, they appeared strong and well-prepared for the vegetative phase. The rapid germination and early light exposure have set a promising foundation for the growth journey ahead.
Likes
1
Share
This was an easy week with flushing the 2 B Blunt and Wreck'd Nuts so that I can take them both down. The Wreck'd Nuts just did not recover well from the lock out issues it was facing. It all came out of nowhere and got kind of serious even with a solid flush. That strain is a bit more picky with the nutrient balance than the others were. Leaving the Sex Melon and Rainbow Candy for next week. They still have some beefing up to do.
Likes
51
Share
@Corwinism
Follow
WEEK 5 (03/28/2021 - 04/03/2021) Day 38: 03/28/2021 Plants had their first feeding today. It’s been about 3 or 4 weeks giving them tap water only. With my ppm dropping in the soil, I thought now would be a good time. Leaving out the Cal-Mag this feeding. Nutrient mix: 651ppm, 6.0 pH, 71℉ FF Big Bloom: 5ml/gallon (⅓ strength) = 15ml/3 gallons FF Grow Big: 5ml/gallon (⅓ strength) = 15ml/3 gallons ppm/ppm = runoff/soil JB#1 - 960ppm/309ppm, pH 6.9 JB#2 - 1290ppm/639ppm, pH 6.8 AP#1 - 1400ppm/749ppm, pH 6.8 AP#2 - 1190ppm/539ppm, pH 6.8 GC#1 - 1190ppm/539ppm, pH 7.0 GC#2 - 1350ppm/699ppm, pH 6.8 ------------------------------------------------------------------------------------------------------------------------------------------- Day 41: 03/31/2021 Plants watered around 5:30-6:00 p.m. ppm/ppm = runoff/soil JB#1 - 955ppm/653ppm, pH 6.8 JB#2 - 1070ppm/768ppm, pH 7.0 AP#1 - 1470ppm/1168ppm, pH 6.8 AP#2 - 1390ppm/1088ppm, pH 6.8 GC#1 - 1110ppm/808ppm, pH 7.0 GC#2 - 1160ppm/858ppm, pH 6.9 ------------------------------------------------------------------------------------------------------------------------------------------- Day 44: 04/03/2021 Plants watered between 5:30-6:30 p.m. Botanicare Hydroguard was used at half-strength to supplement the roots and as a preventative against rot. Tap water: 247ppm, pH 9.4, 70℉ Botanicare Hydroguard: 1ml/gallon = 3ml/3 gallons pH Down: 11.5ml Mixture: pH 5.6, 285ppm (+43ppm from pH solution) ppm/ppm = runoff/soil JB#1 - 858ppm/573ppm, pH 6.8 JB#2 - 857ppm/572ppm, pH 6.8 AP#1 - 984ppm/699ppm, pH 6.8 AP#2 - 1030ppm/745ppm, pH 6.9 GC#1 - 880ppm/595ppm, pH 7.0 GC#2 - 932ppm/647ppm, pH 6.9 ------------------------------------------------------------------------------------------------------------------------------------------- This week has been much more pleasant than the weeks prior. I believe my plants are finally getting acclimated to the medium and recovering from transplant shock. New growth is looking much healthier. Just as a preventative measure, I picked up some Botanicare Hydroguard to use in an attempt to supplement the roots and bring the pH of the soil down to where I want it. Personally, the pH remains just a tad too high for my liking this week. I would like it more in the range of 5.7-6.5 but I'll give it a week or so to see the reaction to the Hydroguard. I've continued with more LST on all but the Glookies #2. On this plant I simply did a topping. It was a risk, considering the plants isn't vibrantly healthy, but I need to maintain it's height. I also did a second topping to the American Pie #1. As can be observed from the photos, not all of the plants were shaped the same way. I got creative with the fabric pots and I decided to LST a few plants a little bit differently just to see which technique/style I liked the most. So far, I am digging the way the Jelly Bananen #1/#2 and American Pie #2 are shaping up. They are going to have a beautiful, wide canopy when they head into flower. I'm considering transplanting into 5 gallon fabric pots within the next week or two so I can flip them to flower two weeks later. My intuition is telling me this has been a pretty lengthy vegetative stage, thus far. I'm expecting all of my plants to double in size during the flowering stage, which should be anywhere between 65-70 days long. I made sure to select strains with similar flowering times (60-70 days). Thanks for stopping by this week. Please feel free to leave a comment or any tips/advice! Until next week! 🙏
Likes
74
Share
Eight, nine, it's boring we say, we're sleeping all day. Frequently the tiny leaves we count, while the real show happens underground. DAY 8 (actually day 7 for Mimmy, but you know.. Kids.. :rolleyes: ) She's growing like she should. I love her already. Still watered her 0.5L water with Enhancer today, forgot to add to the soil. :) Pot was quite heavy. Lights are at 55% approx. DAY 12 Needed to water, so she got her first Booster Tab alongside Easy Plus Micronutrients, dissolved in lukewarm water + added compost tea. The tabs dissolved well, now let's see what they can do! 🚬 I also added nematodes for fungus gnats, saw some of them bloody critters flying around. :argh: Watered 4L. Musik in Video: Cactus by Jeff Kaale Thanks for stopping by and sharing the love! <3 ____________________________________________________________________________ Setup: LED Dualwell 240W Full Spectrum + 630nm + 770nm + 380nm Switches – dimmable PK 125 400/220cm³ exhaust fan Carbon Active Homeline 360cm³ 125 2x 5W Fans 50W oscillating Fan Zelsius 80x80x180 RQS 2022 Growers Pack (Soil Plugs, Easy Nutrients pack, fabric pots 15L) biobizz Lightmix tab water EC 0,3 pH 7,5
Likes
65
Share
@Dendegrow
Follow
Welcome to week six! 🌱 Week five was a complete success – all parameters are perfectly aligned. I’ve increased the water conductivity to a solid 3000 and bumped the CO2 level up to 1200 🌿. Light intensity is now set at 1400 µmol in the center and 1000 at the edges, which will keep the plants strong in their generative state 🌞. I’ll maintain these levels until the end of the third week and then start slowly removing the large fan leaves to ensure the buds get plenty of light 💡✨. I’m also trying something new to activate the “Emerson effect” 🌄: I’m running the deep red lights for 5 minutes before sunset and for another 5 minutes after the day ends. This should give the plants a final boost in photosynthesis, helping to maximize their growth potential! Everything’s looking fantastic so far! The Black Cherry has rooted well across different experimental setups, and at the end of the grow, I’ll provide a full report on the best care techniques for both strains 🌺👌. Willkommen in Woche sechs! 🌱 Die fünfte Woche lief perfekt – alle Parameter stimmen. Ich habe die Leitfähigkeit des Wassers auf satte 3000 erhöht und den CO2-Gehalt auf 1200 angehoben 🌿. Die Lichtstärke beträgt jetzt 1400 µmol in der Mitte und 1000 am Rand, was dafür sorgen wird, dass die Pflanzen stark im generativen Zustand bleiben 🌞. Ich werde diese Werte bis Ende der dritten Woche beibehalten und dann langsam damit beginnen, die großen Sonnensegel zu entfernen, damit die Blüten ordentlich Licht abkriegen 💡✨. Zusätzlich probiere ich etwas Neues aus, um den „Emerson-Effekt“ zu aktivieren 🌄: Ich lasse das tiefrote Licht 5 Minuten vor Sonnenuntergang und 5 Minuten nach dem Ende des Tages weiterlaufen. Das sollte der Photosynthese einen letzten Schub geben und das Wachstum der Pflanzen maximal fördern! Bis jetzt sieht alles fantastisch aus! Die Black Cherry ist in verschiedenen Versuchsreihen gut angewachsen, und am Ende des Grows werde ich einen ausführlichen Bericht darüber abgeben, wie sich die beiden Sorten am besten pflegen lassen 🌺👌.
Likes
36
Share
Day 78 19/07/24 Friday De-chlorinated tap water today, pH 6 with calmag 7.5ml to 5L water. Updated with short video. I'm waiting on the lime to finish so I can flip these. So this is last week of veg for her, seriously 🤣✌️💚 Great growth and recovery from last week's final topping and lollipop. Can't wait to flip, the smell she is starting to produce already as just the base plant is beautiful. Did all final topping this week on all tops 😁👌 Allowing recovery before flip Day 79 Transition week for flower (Flip Week) 20/07/24 Saturday De-chlorinated tap water pH 6 with calmag today, she took 5L with 1L run off. Applied heavy LST as she won't fit in tent otherwise when finished!! Day 81 22/07/24 Monday Big feed today using the flower nutes now. De-chlorinated tap water pH 6 added nutrients. Checked pH again 6.2 after 20mins. I use advanced nutrients pH perfect for anyone asking. Noticed sex already, she is throwing out female pistils already 🤯 only flipped Friday 19/07/24. Smell is becoming more noticeable now. Glad she is now in the tent. Will update pictures tomorrow 😁✌️💚 Day 82 23/07/24 Tuesday De-chlorinated tap water pH 6 only today, 4L little run off. I ensure a little run off when watering to stop salt build up 👌 Recovery this week is awesome from final topping I did last week. She is already colour changing her tops and showing sex pistils 🙌 It's a girl yo 🙌💚🤣 Picture update Day 84 25/07/24 Thursday Still no water or feed since Tuesday, it has been overcast last two days though so not a lot of energy been used. Still happy and healthy 💪💚
Likes
2
Share
@Hydrus
Follow
she slowly begins to sweat and also develops her characteristic color. i have not used any cropping or topping techniques, or defoliation, except that she will develop 2 head buds. i still don't have any uV or iR light supplement, just using a sanlight led and senmatic fl300 grow with adjustable colorspectrum and adjustable poweroutput. wondering. still in the same environment. all the pests have suddenly disappeared. i did not say any prayers.lol my mouth is already watering.lol
Likes
9
Share
All the photos are in the 8x8 now just a few autos in here now FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
28
Share