Likes
Comments
Share
Bud sites are producing black/purple spot in leaves. Bud growth is producing as the days go by. Really excited with this being my first grow Nitrogen boost really helped with the deficiencies. Plants are starting to look really heathy... Prunes lower colas that weren't stretching past the canopy and receiving energy so more energy can be used towards the top buds
Likes
72
Share
@BodyByVio
Follow
Day 65 : officially 1st day of flush . Changed the reservoir with fresh water and 1.2g/5 gallons of Yucca extract and 5ml/gallon of Cleanex from Botanicare . Day 68- I did some defoliate. Few more days until harvest.
Likes
12
Share
@nonick123
Follow
Día 35 (02/11) Flip to 12/12 🚀 FastBuds 15% DISCOUNT code "NONICK" fastbuds.com 💦 Nutrients BioTabs 15% DISCOUNT code "GDBT420" biotabs.nl/en/shop/ 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en-us/products/pro-mix-hp-biofungicide-plus-mycorrhizae
Processing
Likes
44
Share
@I_and_I
Follow
First grow completed, turned out far better than I could ever have hoped, the plants totally bossed it for all the winging it and improvising I put them through, but we got there in the end haha, Looking forward to next grow, can't wait to enjoy using all good genetics, already have some Bruce banner #3 seeds ready to roll out :) Thanks for reading
Likes
15
Share
@Scandic
Follow
Cold week, not sunny weather and the damages from the spray I used is more visible. But we will see if not it will get back in good shape soon, that’s the hope atleast 😄
Likes
3
Share
@Ninjabuds
Follow
7I wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smileI wish they didn't make me do this to get a smile
Likes
Comments
Share
10/16 day 2 of drying. i trimmed a couple buds wet but theyre so dang sticky. will update as things progress. drying conditions have been 60-62 10/20/24 jarred for curing. jars have been 62-65% burping multiple times a day. 11/07/24 she has a really nice high. intense mental high with quite a bit of physical relaxation. laughing non stop. watching movies that felt super intense but not paranoid or any discomfort. couldn't/didnt want to move my legs. a very well balanced and comfortable
Likes
13
Share
As you can see at the beginning of the video, the Gorilla Punch was infested with spider mites at the end. I sepereted her directly outside the greenhouse. High time to harvest them before something worse happens… After 67 days in total from seed to harvest she got cut off👨‍🌾 it is dried in a cardboard box in the cellar at about 20 degrees Because of the spider mites there were some rotten buds, maybe 2-3g i have to cut off. It was definetly the smallest plant of them all. The bud rot is caused by the plant herself... nearly every bud was produced directly at the stam buds directly at the stam.
Likes
2
Share
@Colonel
Follow
Week 10. The smell is insanely strong — like hot tar and roadwork, super loud, super skunky.
Likes
12
Share
Aquí seguimos, separamos ya los machos y nos quedamos con 5 hembras de las 9 que seleccionamos. Más del 50% muy contento. Durante estas 2 semanas hemos estado luchando contra una pedazo de plaga de mosquitos que hemos sufrido. La cosa parece que mejora pero habrá que estar muy atentos. La floracion va en camino podría ser mucho mejor pero la plaga ha hecho sufrir a las plantas. Iremos actualizando. Buenos humos.
Likes
64
Share
@Tonks
Follow
Most eventful thing this week was getting invaded by strayan wildlife! I left the tent open with the portable air con running just outside it cause we had a few days of 35C+ weather, was the only way to keep it cool in there. Next morning there were 20 odd flies and a skink in the tent. Took me two days to get the skink out - I was dropping water on the floor for him to drink which he seemed to appreciate, but the slippery little sucker just didn't want to be caught! Got him eventually though, he made it outside safely. :) Also FYI watching skinks wee is hilarious, both the back legs come off the ground and they do a little wiggle. The 4 Assed Monkey seemed unaffected :P Starting to get some chunk slowly!
Likes
26
Share
Here we are, ready, after a week of truly profitable germination we have 20 beautiful seedlings all marked with the Z of Zamnesia. She is Cosmic Noodles, a brand new strain with almost no previous cultivation, Zamnesia guarantees us that it will be a bomb and the parents confirm it when we read the sheet we are certain that all the conditions to do well are there, now let's get to work with the best known skills and the best suppliers of growth material. The two seedlings are in perfect condition and very large for being on day 9 and we are ready to see them break through now that they are taking the feeding program. ---- New Home - The young ladies have almost all been transplanted into 11-liter pots which is my favorite size to get the best ratio of presence of plants in the grow box / yield. Especially if you don't have to do exaggerated topping or you have to grow the plants straight with main cola as I do for catalog needs as I do, 11 liters guarantees you to make excellent plants. Topping with 11 pots is recommended up to a maximum of 16 tops (4 main crops) - The pots are square plastic and canvas pots branded Zamnesia - The soil used is Plagron Promix with peat and worm castings but not fertilized - --- Start feeding program - A very serious feeding program branded Plagron has begun. We made our own custom table based on the chosen soil (Plagron Promix 100% organic) that you can all do at the link https://plagron.com/en/tools/grow-schedule-calculator and I started giving: - Power Roots - 1ml/l - Alga Grow - 2 ml/l - Pure Zym - 1 ml/l - Sugar Royal - 1ml/l - Vita Race - 1 ml/l - The 100% Organic pack by Plagron can be found on Zamnesia at the link: https://www.zamnesia.io/it/11457-plagron-easy-pack-natural.html We are giving a lot of humidity with a humidifier and we oscillate between 65% and 70%. // Strain Description //cross of Alien OG and Rollercoaster Haze, Cosmic Noodles offers excellent yields and extraordinary aromas. This variety is very powerful, contains 25% THC and produces intense and long-lasting effects. Stimulating and relaxing at the same time, Cosmic Noodles causes an energizing cerebral effect that fades over time becoming soothing at a physical level. - Get a seed of this fantastic strain --- https://www.zamnesia.io/it/10777-zamnesia-seeds-cosmic-noodles.html - Soil and Fertilizers entirely organic --- https://plagron.com/en buy on www.zamnesia.io - Growbox and air sistem --- https://www.secretjardin.com/ - Light - Sp3000 - https://marshydro.eu/ - Music and sound --- I made my girls listen to 432hz frequencies and music from www.radionula.com - Z --- You can find these seeds, much more from the world of cannabis, mushrooms and an incredible series of accessories and gadgets on the reference site not only mine but of many growers ---- https://www.zamnesia.io
Likes
6
Share
Hey welcome back in the 6th week of flowering with the Dutch Passion’s Glueberry OG. Last week my fan broke down and I had to order some new bottles of nutrients because the CannaZym and CannaBoost/accelerator had gone empty, but yesterday I received the nutrients and a new fan! Not to long anymore before harvest! I stopped giving the PK booster, from this week on I will decrease the nutrient values for the coming 2 weeks for the last week I will perform a flush (on most of them). The Brooklyn Sunrise and the other 2 Colorado Cookies just need a week or 2 extra. The Glueberry OG is also getting very frosty, you can really see the layers and layers of trichomes on the close ups. Also, you can see the purple glow creeping on the buds, I wonder how much more purple she will get. It’s funny how you can see the 3 different pheno types of the same strain with the same characteristics only a different structure. I noticed that the buds start to get a bit to heavy for the plant which is good, volume of the buds is very dense. That’s it for now see you all next week!
Likes
18
Share
@Stonyways
Follow
relaxing and enjoying the show almost at max watts SPIDER FARMER SF2000 is now maxed out at 207w , 16"-18" from the plants and I will need to keep up with pruning to allow more air flow and more light to penetrate deeper into the plant. 2, 6" oscillating fans on 100%, may be on low or just one stationary but at this point in the grow air flow is a MUST, specially for the thick, dense vegetation of the OG Kush. trying my hardest to stick with the 4" ventalation til the end of the grow. Right now I have to replace the exhaust ducting due to tiny pin holes leaking more than a bit of light.
Processing
Likes
12
Share
@Tazard
Follow
We have a very full tent! Taz’s jungle 😂🤣. Check out the purple purple photos from day 20!!! Everyone looks absolutely beautiful I’m hoping that the white critical will be ready in 4-5 weeks. She’s going to have some fat colas!
Likes
39
Share
Everything going nicely so far not much stretch after the first week and bud sites popping up everywhere. Day 66 - they were really bushy so decided to give them a lil hair cut, cutting away all the big fan leaves leaving all the bud sites. Day 68 - I fed them until run of today as going on holiday next week and have a pal sorting them out from Monday So far so good :) Will wait till end of the 3rd week and give them a little defoliation to improve air flow and light spread untill then there fed either everyday or every other day depending on when they need it.
Likes
4
Share
Привет садоводы и огородники !!! Началась новая неделя и ветки уже заваливаются ,не смотря на то ,что они стянуты проволокой Но с другой стороны это хорошо ,видимо шишки стали большими и тяжелыми понаблюдаю еще недельку поливаю ее простой водой красивый вырос цветок, оправдал ожидания я доволен !!!
Likes
45
Share
The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches 50% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.