Likes
Comments
Share
Holy Chunkers! I know I had been noticing some nice phat buds forming but DAMN! I had to get in there and throw another pack of bamboo supports in b/c the nugs are soooo damn heavy! It was much needed too and the canopy looks much better for it, there was some droopy shit up in there! I see some spots that i should definilty defoliate a bit but i'm sorta just letting the girls ride it out! Always shooting for about 12 weeks and for most of the plants i think that is about on schedule!
Likes
5
Share
@Ninjabuds
Follow
This was my 1st week with my new 2x2. The brand new elufah uap-1500. This light has a much better spec than my spider farmer light did. One of the plants took a little bit of stress from the spec changing but they are bouncing back. By the end of the week I should be ramping the light back up. They are some fastbuds plants so I’m sure they will love extra light.
Likes
4
Share
Likes
14
Share
@MG2009
Follow
02/23/2022 Lots of stretching this week,not much to say so I let the pics and videos talk for them selves🙏🏻 Enjoy Grape Skunk tall and lanky one I'm loving! I will number her for future reference. Biscotti Skunk has some droopy leaves, it's watering day.
Likes
16
Share
@Mrg7667
Follow
About day 38 i am just realizing that i am stupid and been feeding the biogrow for cocoa coir 🤦‍♂️ way iver nuting with soil it says never to go over 1ml/L So i will be flushing for at least 1 or two waterings. Looking for the tip burn to stop spreading and the tips to not look like there clawing
Likes
10
Share
@SgtDoofy
Follow
3/6: Yesterday I fed half strength nutrients ph'd to both. Amnesia's runoff ph was 5.5. So I made another half gallon of half strength and ph'd it to 7.5 to get Amnesia's runoff to be 6.5. If only I had done this sooner and didn't mess up with the PH testing drops as opposed to using a ph meter, Amnesia's leaves could have still been green. I've been removing all of the dried, crispy ends as I find them, leaving the rest of the leaf intact to suck up as much light as possible. Timelapses are showing that the buds are fattening up well though. Trichome production has kicked in and is covering the leaves. Beautiful colors all around. 3/8: I don't think I can wait any longer to feed Amnesia. Vacation starts midday tomorrow, Thursday, and I'll be away until Monday evening. I'm mixing up a half strength nutrient mix with molasses and epsom salt. I'm also going to try to set up a timer/pump system to water sunday night.
Processing
Likes
8
Share
Normal week just gave water ph to 6.2 her fad has started leaves not standing like they should , again not sure if it's becaise of the ph issue I had from weeks 2 to 5 of flower . Leaves dieing off very quickly now much quicker than they should be I wanna feed but it's 2 late and I don't want to smoke chem. Filled weed. I want to go 10 weeks but she's looking like 9 weeks because of the issues. Flower looks good for a noob like me basically my first indoor grow .
Likes
20
Share
@FarmZOG
Follow
Day 56/15 3 week flower Flowers building up nicely and stretch is over Pass them for a mid bloom regimen For personal note, today I flip her environment (vpd) to vegetative growth I'll be running next 3 weeks in high temps and high Rh 65%-70%
Likes
Comments
Share
@TolaMcFly
Follow
Las plantas están en plena floración , con un leve amarillamiento en la mayoría de las hojas , creo que es exeso de intensidad lumínica o el ultravioleta debe estar afectando , en fin , el crecimiento no se ha visto comprometido y las plantas están comenzando a emanar un olor fuerte dulce , muy dulce con toques de golosina de manzana a mi parecer, vigor increíble de la cepa desde la germinación hasta ahora.
Likes
34
Share
@Canna96
Follow
This is my second run of Dutch Passion with my first being a monster Blueberry Auto. Massive plant, and her pungent odor overtook my entire home while trimming her today. While trimming her it smelled like I was in an earthy Pine Forest with a hint of berries, and it was one of the strongest smelling plants I've ever run. Very easy to grow, responded to all training methods with VIGOROUS growth. I topped her above the 7th node and removed the bottom one so I had 12 mains total. It took me almost 8 hours and I even had help for 4 hours.. Trimming is definitely my least favorite part of cultivating this species. I am super impressed with this strain and really everything Dutch Passion. They have not even sent me a single seed or even acknowledged me on here but this is my second run of their autos and I anticipate each will be a massive yielder. I will probably take a month off then start a run of a few photoperiod mainlines. I will be back with a final smoke report after she's cured, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
6
Share
@Spazmagi
Follow
Hey, everyone. Sorry for the late update, but I didn't get my regular time to update my journals this week, so updates are coming sporadically. Anyways, as far as this lady is concerned, she couldn't be happier. She is just starting to really put off some buds and start her stretch. I'm not sure how long she will stretch for, but I've got my eye on the lights, to keep them in optimal range. Also, in preparation for the stretch, I went ahead and bumped her up to 75% strength nutes (with 100% secondary additives, like Pro-TeKt and Dyna-Zyme) which puts her right around 900ppm and 5.9pH. This Amnesia XXL Auto has a heavy haze lineage and I can already smell it in her. I'm excited to see what this lady will yield since she is really starting to stack up during the start of the stretch. 11/22 - Uploaded new canopy shots (48 hours after bumping ppms). Thanks for stopping by the garden, and, as always, Happy Growing!
Likes
22
Share
Day 43: Watered each plant with 1L with nuts 1589 ppm, 3380 us/cm, 3.3 EC (purple punch and wedding cheesecake) 1563 ppm 3325 us/cm 3.3 EC (strawberry banana) 1476 ppm 3180 us/cm 3.1 EC (gorilla cookies) I have 3 different feedings for the 10 plants They look healthy Day 45: Watered each plant with 1L with nuts 1563 ppm, 3325 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1286 ppm, 2765 us/cm, 2.7 EC (gorilla cookies) 2 different feedings for the 10 plants Day 47: Watered each plant with 1L with nuts 1584 ppm, 3380 us/cm, 3.3 EC (purple punch, strawberry banana, wedding Cheesecake) 1481 ppm, 3180 us/cm, 3.1 EC (gorilla cookies) 2 different feedings for the 10 plants
Likes
11
Share
@blackcald
Follow
All fine, keep fight with high humidity. Plant B get some yellow leafs, waiting answers about it in grow question. Fun fact: plant b (no toping) smells muuuuuuuuch better.
Likes
92
Share
🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚
Likes
15
Share
@BigDaddyK
Follow
CHange Thursday One at back still showing signs of nutrient issues
Likes
37
Share
Day 70 for these Fastbuds beauties Blackberry Auto: With dark purple buds glowing fiercely and a dank smell to match, this girl could make anyone's tent look amazing. During the last few weeks her buds have become incredibly dense and sticky. She is very short and thick in stature compared to the other plants I have in flower. I inspected her trichomes over the weekend and ive determined that she is pretty much ready for harvesr. I expect about 2 oz of high quality flower after dry/cure. Forbidden Runtz Auto I'm really blown away with the turnaround in this girl. She was mutated & so small I almost tossed her out during early veg; I'm glad I changed my mind. She stretched significantly between weeks 4-6 and I really wasn't expecting much from her. In reality, she has blown my mind... incredibly dense and sticky buds have developed in the past 4 weeks. She's got the zkittles smell mixed with a gassy terp profile.. I think the higher humidity through flowering phase really helped develop these dense buds. When I checked her trichomes over the weekend I determined that she will be cut down within the next 7-10 days. Process/ Environment changes: - Lowered my SF4000 roughly 20 cm to increase photon delivery to the canopy - Water/kelp meal only from this point to harvest - My temperature has risen due to change of seasons .. roughly at 27-28 deg C during daytime.. this is why I lowered my lights rather than turning them up - Defoliating any unnecessary fan leaves at every chance I get - I've had to use spools of twist tie to use to keep the branches from falling over from their own weight. I'll tie one end to the top of a branch, and the other to the stock. Not ideal but its working. Cheese auto dry/ cure update: After 10 full days of drying, I gave the buds a decent trim and put them inside glass jars where they will remain for many weeks. I add 2 way Boveda humidity packs to help regulate the relative humidity within the containers. I also use tiny hydrometer pucks to measure the humidity and temperature inside the jars. My ideal cure is at 62% RH
Likes
31
Share
Growth is super, despite having splitting and getting a break where I topped due to something falling on the plant. I quickly patched her up with some electrical tape and a cable tie and she recovered within a day! Super resilient plant. She's starting to smell and putting out a few pistils already at the end of week 1 flower!
Likes
5
Share
@beer420
Follow
Were getting there! Plants looking beautiful and swelling up. Two questions below! Thanks for reading and happy growing.