This is exactly the 🇲🇦 morroccan 🇲🇦 way of sifting resin from kief. Traditionally, apart the hand rubbing method, dry sifting through a mesh is the most used way to obtain resin, from 🇦🇫 Afghanistan 🇦🇫 or 🇳🇵Nepalese 🇳🇵 Mountains to 🇲🇦 Morocc 🇲🇦 Rif passing through Bekaa valley in 🇱🇧Lebanon 🇱🇧. The average size of meshes used vary from 90 to 180 microns and are mostly made by silk and for this reason uneven. I think the most productive ways to sift are Dry Ice and  rotating pollinator + CO2, I've tried a DIY pollinator built by a friend and it can reach up to 20/25% of resin extracted at 120 microns and 15% at 90 microns. But smell and taste don't reach that traditionally extracted but this is another story. Morroccan way is good compromise between a stashbox or more evolute methods. It requires less than 10 dollar of expenses. You need: a basin or pot  without handles a heavy-duty plastic bag that contains the basin a pair of chopsticks a good 120 microns net an elastic band tape Kif or trim q.s. Here is the link where I buy my meshes. Very high quality, customable size and material (steel or nylon) and length and very kind vendor on AliExpress https://a.aliexpress.com/_uwfQzq Drum for 3 minutes. .....perhaps you will find that you have an innate talent as a drummer, throw the shit away and put your head right......

16/01 Spider mites since 2 days, already start getting black spots on the leaves, she's very close to ready, so cut half way, will keep a close eye on the bottom... For another couple of days... 21/01 not much movement 24/01 cut lower part and cut the clones, BEST CLONES EVER ❤️♥️

Next Week i will start 12/12 (Flowering Stage).

Flowering has finally arrived, the structure is fantastic, each branch has its own space, and the light manages to penetrate inside. With the help of the fantastic tent-x I can keep everything under control, humidity and temperature are now no longer a difficulty to overcome, and thanks to the LED module I can also control the switching on and off of the LED light. The best thing ever is being able to use the statistics that the device retrieves, calculating the VPD and with a table I can understand if the plant is breathing well. I thank TROLMASTER immensely for giving me the opportunity to test their product! 👽

Bloom week one. Changing to canna flores the next waterchange.

FERMAKOR KOH Extraction – Update Last time I said the batch would be done in 3–4 days, but I made a last-moment change. I added fresh cannabis leaves, branches, and pistils to help buffer the extra KOH, fix the PK imbalance, and see if I can bring it into line without using citric acid. Reaction so far: greens are breaking down fast, adding nitrogen while soaking up some of the excess alkalinity. Smell: strong ammonia, but not rotten — typical of proteins and chlorophyll being stripped out. Texture: slurry has darkened, foam is down, liquid looks stable. Plan: let it sit a couple more days stirring, then check if it’s ready to use and use some citric acid in case the pH is still to high and "force" it ready.

Привет друзья. Моей растихе сегодня 176 дней 27.12 перестал кормить и начал проливать чистой водой 20.10 перевёл свет в режим 12/12 Начал применять LST технику на 19 дне, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ С 20.08 LST технику На сегодняшний день влажность 54% 5.09.2023 заметил высокий Ph 7.9 С 48 дня Ph не ниже 5.8 На сегодняшний день Ph 6.0 Начал кормить с 60 дня Canna Terra Vega PPM 150 Всем мира и добра! Не забудь поставить лайк❤️, если понравилась как прошла неделя И читайте наш TELEGRAM: https://t.me/smail_seeds #Smail_Seeds 😀

Week 23 💚 we're getting closer I plan to harvest in week 24

What’s growing on everybody?!?! Exciting week in my Banana punch grow! The plants are really growing quickly now. Got the light cycle switched over to 12/12, got my first layer of trellis screen put up so I can start weaving branches through. I also started the bloom feed today, which just substitutes the grow for the bloom as far as my botanicare line goes, I like to use a small about of MOAB to really get my plants to start flowering. I’ll have more boosters coming on in the later weeks of flower. I will continue with my IPM regiment of spraying Athena IPM twice a week until the third week of flowering, which at that point I will cut off all sprays. I plan on running this strain until my planned harvest date which is 3/13-3/20. I vegged until my plants were telling me they were ready to go to bloom, I let the shape and hardiness of my plants dictate when to flip them, I wasn’t rushing them. I’m excited to see how everything looks in the coming weeks! Thanks for looking, As always, Happy Growing everyone!

This week has been great progress on the plants, as u can see, giving your plants the oxygen it needs and they will flourish I wish I've gotten a better pump from the beginning, but o well learning curve lol, it has been getting warmer now that spring is arriving, the inside of my tent is at 80° so the only issue I see in the future is water temp. rising but ama try to keep her as cool as possible. (Not running a chiller) I did started to see some pistols coming out so, she starting to flower. Ama switch her nutrients to bloom A&B next week as with some Nirvana see how that goes. Am still checking the pH twice a week (Once in the morning, and again late afternoon.)

TUESDAY 7/23: The FIM'ing seems to have only doubled her main, but that's okay. She's going from Hawaii conditions to Arizona conditions every day...8-10 hour of 72f/70+%RH to 12-14 hours of 96f/35%RH and taking it like a champ. I foliar fed her after taking her outside today and started training her a little bit. Gonna try to get those tiny lower branches to think they have a shot at "primary cola" status. I had no wire with me, so I just used a pliable length of dead-ish vine that was lying on the ground. I'll use some wire and binder clips when I can find it.. Evening...same day: She broke the vine I was using to hold her down, so I dug around and found some clips and wire. WEDNESDAY: She was just about 4 inches beneath 120w of LED last night with tons of blue spectra, 69f temperature and 80% RH. Those lower branches gained another half inch each and the top colas have turned to face the sun. I foliar fed her and gave her a little douche of Bactrex this morning when I took her outside. Had a cool front come through today, so the high will just be 87f and it's dropping to the mid to low 60's tonight..hooray! They're forecasting another day or two like this before the return to "oven-like" conditions.👍 I carried my pole saw down to the site at daybreak and removed a few smaller branches above them and to the West. I'll see if it is allowing some evening sun to reach her when I go down there to fetch her home to the LED's for the evening. THURSDAY: I was somewhat successful with getting a little bit more direct sunlight to her while outside during the day..about another 20-25 extra minutes. She got a sip of compost tea today with a little kelp me kelp you and big bloom. I tweaked her indoor domain a bit..she's now got 2 x 12w Miracle LED veg bulbs (cool white with 475nm peak), 1 x 75w cool white/460nm 225LED panel, 1 x 40w Sansi daylight grow bulb, 1 x 50w 460nm/cool white flood, and 1 x 18w 18" pinkish grow light bar. None of the lights are more than 5 inches from her, so she's incredibly well lit. I'm estimating that it's about 5,000 micromoles an hour, but I'm keeping the temp at her canopy under 80f with 90+% RH. It's not direct sunlight, but I think she's happy. I'm still undecided as to whether I'll keep her on a 24/0 schedule or if I'll cut it back to 20/4 when she starts flowering. Since I can provide her with a cool and humid environment for a third of the day, I'm leaning towards running 24/0 the whole grow. FRIDAY: I accidentally burnt her up a little bit today..one of the overhead LED's slipped and was about an inch from her top leaves...oops..I put her outside and misted her with some boom boom spray and kelp me kelp you.. SATURDAY: She's got a few crispy leaves, but she perked up and is growing again...whew...😓 SUNDAY: I tweaked her indoor environment today. She's now got a 120w quantum board (3500k) overhead, a 24w panel with 225 x 660nm red LEDs, the 40w Sansi light, one 9w 2' bar grow light, and one 12w Miracle LED blue.

In middle of ripening faze,Girls getting huge and drinks about 2,5 L of water per day nice and sweet smel coming from tent just about 4 am when I waking up 😄 even these are all autos I got them nearly 3 months running and see it on another month or so also still no sings for any colours yet got 2 purple strains in lol next week 3 of them start flush week

Buenas me ha gustado cultivarla, pero no me ha gustado nada que una bolita que estaba muy escondida que no la he visto me ha liado un poco el cultivo y la cosecha final, (hermafroditismo) es algo que les lleva pasando bastantes años a este banco español a pesar de tener temperaturas y riegos y pH muy controlados, sabores como un toque incensado y agridulce al mismo tiempo cuando le das la calada y cuando exhalas el humo se te pegan un tono frutales en la punta de lengua que no sabría describir esos tonos dulces, pero te refrescan mucho la boca, caladas muy suaves y agradables y te da ganas de hacer cosas y creatividad al menos en mi punto.

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 The babies growing well, and maybe too much well this week 👽🤔 Look healthy and growing fast. I start to have a serious difference size between my plants, will be not really easy for the scrog, but we'll see how turn in few weeks. Still the mutation on the #1, the last node and the secondary stems look normal 💪 will start the training and topping next week 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 0.4 l Water + Roots + Grow + Zym (1 + 3 + 1 ml/l) 0.5 l Water + Roots + Grow + Zym (1 + 4 + 1 ml/l) 💡Mars Hydro - FC 3000 50% 61 cm. Mars Hydro Fan kit Setting 8 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Anesia Seeds - High Mars 36% THC🌲🌲 https://anesiaseeds.com/product/high-mars/

6.12. Day 77 of life 39 of flower of max 56. My plan with Christmas weed is in danger. Oh boy. I hate Ripen. New Light turn. 20/4. And lifted up to 40 cm. 7.12...... 8.12. FUCK ME. FUCK ME TWICE. HOTTEST GIRL IN MY TENT.... Forgivenes for that words. 10.12. Main¹ and Main ² chopped. Yes i know 1 Main 1xMain Main. All the same, but i Like Main¹... 😛 Time to dry her out. 12.12. Day 45 of flower! Ready. Uff thats fast. In 7 days is chop. The buds re dense. Not stonehard, but dense. 13.12. The earth is moist.

Everything coming along nicely. I’ve discontinued all nutes but will give one more little top dressing to the cheese plant tomorrow then that’s it. Just straight stabilized RO water from here out. The slurricane is just packing on PM like crazy. The cheese has actually stopped the spread for the most part. At harvest I’m going to wash the shit out of the slurricane and cheese with some warm RO water and some h202 to get the majority of it dissolved. Other than that the quality of the slurricane is beyond ridiculous. It’s by far the stickiest strain to the touch in the tent. It’s probably winning for smell too. It’s straight gassy licorice pine. The pm susceptibility is a deal breaking drawback though. The cheese is looking good and smells great. It almost smells like rotten milk. Some of the nugs are really filling out into these nice long chunky little things. The pistils are turning a light orange/pink color too. Unfortunately it’s not maturing at the same rate and will make everything in the tent go for another 1.5-2 weeks. Garlics are looking better. The lanky pheno has filled out quite a bit more than expected and is super frosty with a great smell. It’s finally starting to purple up a bit. I think it will still be quite leafy around harvest but time will tell. Pheno 2 has better structure and density but lacks frost, smell and color. Not very impressed by it honestly. The zkittlez is looking great and getting super frosty. Especially around the crowns of the top colas. Lowers look like shit though. Despite being somewhat leafy, the main branches look quite dense. It’s probably the shortest and bushiest plant in the garden. It’s yellowing out quite a bit now and will probably finish with the blackberries and slurricane. The blackberries look amazing and smell even better. One of the phenos is a crazy producer and creates massive buds with musky berry terps. The other pheno is a beautiful purple strain that produces a crazy amount of frost and chunky golf ball nugs at the expense of large yield. It’s smell is very sweet and candy like and has been a very low feeding and maintenance plant. Slurricane #4 looks great aside from its infection. It definitely wins for resin content and smell but looks like a low yielder.