Likes
Comments
Share
So this was quite the productive week..! They grew enough after the topping for em to bend over. First step to ScrOG has been done and I'm quite happy with the results 💚 Next step is the screen of course! Then let them full it and switch em Just a reminder.. I'm growin 4 plants in a 120*120 so a little patience would be required if you, like myself, would like to fill that space up ❤️💛💚 One day I'll fill it with just one plant 😆😆
Likes
10
Share
So she is growing fine I turn off my humidifier notice it was giving plant issues did raise the light another 12 in and I also topped her I almost forgot I transferred her to a 3 gallon bucket
Likes
4
Share
She is still showing some healthy growth as the weather is great these summer days. Most notably she is getting more and more white pistils everywhere.
Likes
10
Share
@BodyByVio
Follow
This week I top all 8 Green Poison ( 4dwc and 4 coco ) clones. They look healthy and happy and few days later I already start to low stress training (LST) them.
Likes
9
Share
@Jake13255
Follow
Gonna get the dry weight after they’re done drying and curing. Also more bud pics
Likes
15
Share
Week 2- All 4 Cream Cookies are looking good. Very similar looking seeedings at this point. I harvested the larger plants that were in last weeks diary and moved all seedlings under my 315w CMH fixture. The fixture is 24" above the plants. I'm going to keep all 4 indoors in my tent for another week, then move 2 to the outdoor garden. I'd like to see 2-3 nodes before transplanting. I also have 3 gallon self-watering pots ready for transplanting the 2 that are staying in the tent. I've never used self-watering pots before, but 'The Rev' (from Skunk magazine and True Living Organics) swears by them. They don't actually water themselves, I'll still have to add water manually. But there is a reservoir at the bottom for the roots to be able to feed off of. Supposedly, once the root network is established to the bottom I'll be able to add water to the reservoir only. I'm following the Fox Farm feeding schedule, but at 1/2 strength. So this week is Big Bloom only. I also added CalMag and some Recharge. I'm starting another diary in a few minutes for the other plants I have going on. Look for it soon! 😉
Likes
10
Share
La pousse continue ! Je les soutiens avec environs 5 litres d'eau par semaine, il fait très chaud ici (30-35°c)... Petit focus sur les Frosty's Auto Freack : semaine 4 de floraison, elles font 60 centimètres. Sur la terrasse je sens qu'elle lutte moins contre les éléments et est arrosée comme il faut. Elle est donc plus développée. Elles sentent fort toutes les 2 ! Les nigérianes continuent leurs courses avec 110 centimètres. Je vous tiens au courant pour le passage en floraison.
Likes
5
Share
@Ninjabuds
Follow
The snow is really coming down out there. Big fat flakes are piling up on the ground, and it doesn't look like it's going to stop anytime soon. I guess that means no outdoor plans for today. Might be the perfect day to get cozy inside with a warm drink and a good book The pound cake auto plant is growing like crazy! I'm so happy to see all the progress we've made. Yesterday, I finally got around to tying it down – it's amazing how much more stable it feels now. I can't wait to see what this plant looks like in a few more weeks.
Likes
18
Share
@Lukush
Follow
Hey growmies all is good and mi baby girls are loving life!! Gonna start giving them some nuts in a couple days 👍 Thanks for passing along have a good one growmies. GO ON MarsHydro and check this led out! 👍💪 https://marshydro.eu/products/mars-hydro-sp-6500-led-grow-light/ SP6500, as one of the huge single bar LED grow lights, installed with top quality Samsung LM301B diodes, designed with enhanced red in broad-spectrum light, emits the highest central PPF and has the superb penetration that its major applications are for high-wire plants and greenhouses. Wattage – 650w Veg Coverage – 4×5 ft Flower Coverage – 3×5 ft Featuring a thick aluminium passive heat sink and densely arranged chips, the SP Series provides high efficacy but low heat output while minimizing obstruction to natural LIGHT!
Likes
16
Share
@Mrg7667
Follow
About day 38 i am just realizing that i am stupid and been feeding the biogrow for cocoa coir 🤦‍♂️ way iver nuting with soil it says never to go over 1ml/L So i will be flushing for at least 1 or two waterings. Looking for the tip burn to stop spreading and the tips to not look like there clawing
Likes
4
Share
05/17 - Both are vegging accordingly - applied a hard LST to even out the canopy and distribute light coverage around the plants - Both are currently in 1 gallon pots - Both will be transplanted into 5 gallon pots by the end of the week - I will begin micro-dosing their nute feeds to negate transplant shock. 05/18 - Both ladies are doing great after transplant (5 gall pots) - No transplant shock - I gave them both a heavy hit of silica to assist in the transplant recovery - They will be will be in the 2x2 until next and then both moved into the 4x4. 05/23 - Both of the ladies have blown out and top colas are healthy and tall - In an effort to expose more light coverage to the middle both plants will be moved into the 3x3 and a net will be dropped on them today or tomorrow - They will be ran in the same conditions as the nursery tent (High Temp/High Humidity) - Both ladies will also be hooked up to the Vivosun drip emitter system for more consistent and efficient feeds.
Likes
32
Share
Very delicate strain, weak and quite particular ...Maybe he's not even a fan of slightly higher temperatures ... We'll wait for them to dry to find out more 😉🤗
Likes
8
Share
@Rinna
Follow
The ladies are still doing great and stacking very nicely! The leaves do look very very dark green with slight tip burns, so I doses down the nutrients slightly from 1100+ to 950 ppm! The grow light makes the leaves look more light green than they actually are (check the night shots) both pheno’s smell like a nice and strong gelato (vanilla/gas) 💪🏻
Processing
Likes
62
Share
I’m baaaaack!!! Sorry I’ve been away for a while. I’ve been busy getting everything together for the next phase… Welcome to the Dude Garden 2.0! I now have 3 grow areas. Two 2x4 tents (one for clone/veg, another for mothers) and a large 10x12’ish flowering area (its actually larger than that, but I’ll be conservative). The tents are running 300w LED’s and a T5 for the cloning/sprouting station. The flowering area has a 1000w HPS!!! I’m totally psyched to see how the HPS does with flowering for me. From all the research I’ve done It seems to still be undisputed that HPS is the best for flowering (but not so good on the electric bill). I moved all plants from the tents to the new flowering area under HPS. That includes 3 Blackberry’s (FastBuds), NYC Diesel Auto (Barney’s Farm), DinaMed+ and Critical+ (DinaFem), Cream & Cheese CBD (Seedsman) and 3 Cherry Hemp (Elevator Supply Co). With the autos You’ll see the first 2 Blackberry’s are getting close to harvest, but looking a bit funky due to the issues they had early on as seedlings. The 3rd is looking much better and will probably yield more than the first 2 combined. I do love the purple and the aroma is insane. The NYC Diesel Auto is looking very nice, the main cola is developing nicely and has great colors. With the photoperiod plants, most are already kind of big considering they haven’t flipped to flower yet. I’m expecting the stretch to kick in at any time for these girls. I hope they don’t break the roof. The Dinafem plants are looking best so far at this stage IMO, but the Cream & Cheese CBD is looking very nice too. And I’m not disappointed at all with the Cherry Hemp plants, one is several weeks older than the other two, but the smaller two have a great node structure. It should be very interesting to see how these 3 grow from here. I expect the older one to be the largest at harvest, but the 2 little girls look ready to explode. We’ll see what happens. I transplanted the photos from the 3 gallon grow bags to 7 gallon fabric pots. And also purchased some Pot Elevators that they are sitting on. The Plant Elevators are pretty cool, they have a mesh base to allow better drainage and air flow to the bottom of the pots. I have clones of all of the photos cut and planted in Jiffy pellets in a humidity dome. I took 3 clones of each. The strongest clones will become mothers, the others will be grown out. Note: The HPS gives much more of a yellow wash on the pics than I was expecting. I tried to color correct the pics the best I could and tried to get to the real colors, It should be pretty close.
Likes
6
Share
Heard good things about this strain so decided to give it a go and maximise my grow tent with plants no point in not using the space time and energy when I could be filling it with a new seedling lol. She has taken 4 days to germinate which is the usual time it seems to take when placed directly in the substrate
Likes
4
Share
Week 25 for 9lb hammer F2 They are finally getting some sort of smell but again barely anything she looks better than she smells that i can say 😂
Likes
14
Share
@goeser
Follow
At least one if the ladies is ready to harvest. Just made a final check with the microscope and i think she is ready. I could wait a bit more for more amber heads but i think thats ok.
Likes
14
Share
Esta semana realizamos la tercera y última poda baja. Subimos la potencia de las luminarias Lazerlite Pro 720w by The Pure Factory al 100%. Conectamos a tope la extracción durante el foto periodo nocturno. Y conectamos el aire acondicionado durante el periodo diurno, cortando la extracción. Seguimos con los riegos según la tabla de JUJU Royal by BioBizz.