The Grow Awards 2026 🏆
Processing
Likes
20
Share
@mikemobes
Follow
7/28/19 --Super happy to see the plants doing this well. Ive found that every other day feeding is the best for these specific plants. Im a big proponent of only watering the plant when it signals it is ready for watering. The least possible amount of induced stress for these plants is the goal for me. Cheese seemed to be totally unaware of the FIM that was done on it, as it showed not even 1 sign of stress post FIM. Cream cookies is another story, she's quite sensitive to absolutely everything--including watering. I am super happy to see that the last fan leave on the 5th node has 9 leaves--a really good sign that the plant is doing extremely well. The more leave nodes on each leave the healthier than plant. There are zero signs of nutrient burn at all. It was difficult at first to see if the slight bending of the leaves was due to nutrient burn, but I later figured out that the leaves were pressing against the side of their pot and as a result bending--wasnt nutrient burn. Ive been varying the pH widely each week--with the attempt to be as random as possible. I want to make as many nutrients available to the plant as absolutely possible. I really am loving the Advanced Nutrients Sensi line. Im growing in coco but I bought the nutrient mix not designed for coco with the understanding there might be some potassium issues down the road. But otherwise as a chemist by profession, when I heard about the pH perfect line I was rightly skeptical. It will balance your solution to the correct pH range (5.6-6) IF you start with dead neutral pH 7.00±0.05 water with no dissolved salts (distilled water). the distilled water I've been buying (from Walmart) clocks in on the pH meter at around 7.6-8.6 which will cause the pH perfect technology to neutralize some of the dissolved ionic species and bring the pH well below safe range for cannabis. Ive found that if you pH the distilled water to 7.00--add your Ca/Mg/Fe, THEN add the pH perfect technology the range will be much more suitable. It was kind of annoying since my pH down is so much more concentrated than my pH up. Me problems I know but still annoying. --One of my amazing collages at work is going to water both babies today with Week 4 nutrient solution even though we are technically in week 5. My vacation has prevented me from mixing the solution to feed. --This vacation has brought so many new automation ideas to coco coir growing. Ive been developing a hypothesis that involves what I call the "level of droop age" and its correlation to plant thirst. It began when I was growing in soil and needed a better way of telling when to feed the plants instead of a fixed schedule, which seemed to be giving way too much water to the plants. ---Ive developed a "droop scale" which can be directly correlated to plant thirst. Ive also found that very happy plants that do not want water will go through a natural droop cycle as night approaches. I take this as the plants time to grow out its root system (happens at night). By the morning the leaves are pointing up in what I call "leaves up loving life" ---So the scale I've developed is kind of arbitrary but it does a really good job imo if you become very familiar with your plants. ---The scale ranges from -10 (the most droop in the leaves every observed) to +10 (the most extreme leaves up loving life ever observed). the scale is out of 10 not 20. ---lets say that you watered your plants today, and their leaves were at a -7/10 droop (what when I water my plants). If you water them you should observe no increase in droop--in other words after watering the droop should only improve not regress. If the droop increases after watering your plants wanted a little more time before their feed--so alter your droop scale until you find the level of droop that when feed causes only an increase in the droop. 6 hours after watering you plant droop should be >+1/10. The next day you should see your plants at least at +5/10 droop. ---Merging this scale with automation is going to be difficult as ill have to use an open source machine learning AI to learn when the plants droop is sufficient enough to justify a watering. I hope to set up the system to be automated or manually operated over the cloud. ---Using a Raspberry pi and an Arduino as well as a whole set of motor control boards and sensor boards I hope to put together an integrated system that can detect when the leave droop reaches critical levels using a camera, and feed accordingly. Ive been all over the internet and all automated grow projects rely on soil moisture sensors which only penetrate <4 inches into the substrate. This doesn't cut it for me as the root ball of the plant is way below that 4 inches of the sensor, yielding readings which only pertain to the top layer of soil, which just so happens to dry out the fastest. ---Im going to keep my grows at 2 plants each from no on--and I plan to make an automated system for both plants which can control watering to both plants individually. Im currently trying to figure out the best way to track volume of water dispensed. A flow meter with a know diameter tubing and a known diaphragm pump rate seems to introduce all sorts of inaccuracies into the mix. I think im going to design an automated measuring system that uses an ultrasonic distance sensor coupled with a camera and AI to fill up a the hopper to the desired volume of nutrient solution. ---I have all the hardware listed but im a complete dumbass when it comes to coding. My profession is chemistry, coding goes right over my head. I have an immense respect for coders as I honestly have no idea how you guys do it. Its like learning 15 different languages at once and using them all together. Blows my the ability of our society. The wide range of skills. Love it. ---If anybody would like to help me code this project it would be greatly appreciated. 7/30/19 -Cream Cookies is doing extremely well. FIM was a great idea. 4 new main cola sites came out of the FIM which im very happy about. The undergrowth also has caught up to the canopy. the canopy has a plethora of bud sites. Defoliation done to increase light to bottom branches. Largest fan leaves towards the canopy removed. FIM'ed leaves that opened up also trimmed, allowing more light to penetrate to those small bud sites. --Ive counted sites where main colas can form. Very happy with this HST I decided to do. --LST done and branches separated from each other so they can receive ample light. Thinking of adding supplementary 40W flowering bulbs for flowering. -Cheese FIM didn't work as intended but it did break the symmetry of the plant. One of the first branches has grown higher than the canopy and I had to tie it down using LST. Did some defoliation and going to do some LST later. --Some light stress spots on Cheese, makes sense since I wasn't physically at my apartment to raise the lamp. Before raising the lamp the plants were 14 inches from the light which is way too close. The closest it should be is 17 inches. Raised the lamp to 18 inches and spots are subsiding. --Being overly cautious ive increased the dose of Ca/Mg/Fe to 4 mL/gal incase spots are actually a Ca/Mg/Fe deficiency from explosive growth. 7/31/19 -Cream Cookies is showing beautiful pre flowers. Still recovering from light stress. Looks very similar to nutrient burn but only present in tip most growth suggesting light burn. 14 inches was way too close-vacation problems lmfao -defoliation done on both cheese and cream cookies to expose bud sites -LST done on both cheese and cream cookies to bring bud sites into the light -both plants fed 400 mL Week 5 nutrient solution-when I mix next weeks nutrient solution im going to reduce the concentration to 12mL/gal w/ 3mL/gal Ca/Mg/Fe. --I want to precent any nutrient burn plus plants are slightly stressed from defoliation and light burn from my vacation. -lamp raised to 19 inches to help aid in stress relief -plants are responding in a weird way to the watering. Not in a bad way-but in a different way--larger lower leaves are not drooping like in the past its just the much newer growth is drooping. Makes sense since newer growth has less developed support system. Makes me feel much better about my watering schedule. --Clawing which I suspected was due to light stress is getting better-especially after a feeding. 8/1/19 --Calcium deficiency just barely showing on midlevel fan leaves. Good thing calcium is a mobile nutrient. Going to readjust the nutrient solution ph to be 6.2-6.3. Been accidentally locking out calcium. --Defoliation done on both plants to expose more bud sites and to thin out the thick canopy so light can penetrate below. The hope is to defoliate correctly. If done right I won't have to lollipop. --Cheese has no preflowers yet--still in veg --Cream cookies looks like it started flowering. 2 preflowers were spotted earlier in the week. Surprised to see how fast the plant moved into flowering. Going to be feeding it with flower nutrients starting week 6. --Going to continue feeding cheese with veg solution until preflowers are observed.
Likes
9
Share
She's looking super beautiful after the stretch,she looks strong and ready for full flower let's see how this beautiful California girl performs! 💚 🌱 ✌️
Likes
20
Share
welcome to 📅 day 8 of veg 3/22/2021 🌱she is growing just as I would expect from the Aglex light. She is starting her 3rd set of leaves and she looks healthy and happy. Update 📅 Day 11 of veg 3/25/2021 she grew quite a lot over night and so I micro toped ✂️ her I will upload pics in the morning
Likes
48
Share
Raspberry Ripple Number One and Two (Flowering Plants) This week is the final week of Flower, I am noticing milky coverage on both plants and some amber trichomes as well. I gave the last watering today of distilled, dechlorinated water, with no P.H. Adjustments at 7.2 PH. I plan to harvest April 11th. Number One Pheno- The Number One Pheno is fully swollen and ripe now. The colas are densely stacked on the canopy. The foliage is quite over-faded, with some leaves being so dried out they crumble to the touch. I don't know if this is because the plant was in a bit too small of a pot or if my light was a little much these final weeks of flower. It is definitely ready for harvest! It's smells are still heavy in the raspberry candy department, with those hints of earthy leather on the back swing. Giving the number one pheno a very unique musk. The resin is greasy and plentiful! I can't wait to take this one down and trim it up to see how it looks in a jar! Number Two Pheno- The Number Two Pheno held out a little longer in its 5 gallon pot, it's a bit smaller of a plant. It's about 65% faded now but it's trichomes look finished! It's trichomes are very stacked out and coat this plant in a snow film! It may look a little boring next to its sister color wise, but it still sports some purple and pink hues under all the frost and I still think it'll be a worthy smoke as well! It smells of a raspberry wine but with that hazy fruity power. Almost like a strong mimosa strain. Clones- The larger clones in the 55 inch 2x2 MarsHydro veg tent, were starting to drink through water quickly! Mostly the larger number one phenos. Which would consume the entire dryback of their full pots in one day. I transplanted all the plants in the 55 inch tent into square pots (2 gallons for the Number 2 Phenos, 3 gallons for the Number 1 Phenos) this should hold them over for 3 to 4 weeks, so I can harvest and dry my flowering plants. I was unable to transplant the clones in the smaller Mars Hydro 30 inch Clone Tent, due to space constraints. I'll be feeding them worm castings and Down to Earth Crab Meal tomorrow. All the clones are looking healthy and look like they would be great candidates for flowering or mother plants. Tech Upgrade- This week I was able to purchase a Photobio Phantom Par Meter at a local grow shop's going out of business sale. With this tool I'll be able to get a dead on map of my light intensity and adjust accordingly. This will be great to have when setting up my new HLG Blackbird next cycle. I also got some 15 gallon grass roots fabric pots to try in the flower room next cycle. I also reached out to AC infinity and have an upgraded Cloudray S6 Gen 2 Oscillating Clip Fan on the way. My Gen 1 fan broke and would no longer oscillate correctly. AC infinity replaced it free of charge with the latest model. I think that about sums up this week! I'm very excited to take these plants down and begin preparing for next cycle. I was extremely lucky to get such amazing results of my first Pheno hunt. I can't thank Mosca Seeds and Tiki Madman enough for selecting such great crosses. It's hard to believe I got these two seeds as a freebie pack, with another order. I'm super thankful to have Grow Diaries to use and rely on for charting my week to week data, questions I have, and comparing my findings and results to other growers with similar strains, like @THCpapa grow of Raspberry Boogie! Thank you for checking out this week's entry of my growdiaries! See you for the harvest! -Starfish
Likes
16
Share
@Haoss
Follow
These seeds are grown in Georgia, OTOBAIA x AMNESIA HAZE, seeds of the same variety should be grown in coconut and soil
Likes
23
Share
* ********* Week 11 - June 20 to 26, 2020 - Days 71 to 77 from germination *********** * It is the end of flush week and she went into darkness on Wednesday night, day 75, for two days. Saturday will be harvest day and start and the dry process👍 She has certainly been going through the beautiful stage of senescence and her fade is gorgeous. The purples and yellows coming out are great......covers up the brown spots😂😂 Her buds are densing this week as we work on bring down the humidity. Running in the mid 60’s for humidity late in flower is a different experience and one that takes some getting used to. Bring down further to low 50’s has really helped to bring out her frost as well. Kept the humidity high to form big buds......now lowering to make them more sticky👍👍 I am feeling very strongly that the big part of the pH issues this run was a change in feed water. I have always used bottled RO water for all my grows, except outdoors, but this grow I switched to tap water. Dechlorinated the water with air stone and gave it 24 hours min before using. Wanted to save some money and tired of lugging bottles downstairs a couple of times a week☹️ This is worked out nicely and a lot more convenient. However, the city must be putting some crap in the water that is causing issues in my media and raises the pH after the watering. Out of the tap it is 8.4pH and 275ppm. Since ppm were not too bad in my opinion I moved forward without filtering the water.......oops🤬🤬🤬 Out of options on what is causing the issue, I switched back to RO water late last week........all the girls are happier!!!! F......missed the cause for weeks. Always learning from this plant and my own mistakes to get better every run😉👍 Also wanted to add a little more stress to girl to help push out some increased resin. I drilled a 5/16” hole into the main stem to cause her stress. I did this rather than trying to break a branch and will see how it goes this run. Sterilized a new bit in Alcohol and went for it. They went into darkness about a couple of hours later. Excited to see what happens when she comes out to get chopped😃😃 Little more detail...... June 20/20 - Day 71 - Rezin and Liquid Weight @ 2ml/L = 285ppm and 4.0ph - 8L given to get a good flush - Runoff in pots already were 7.8pH and 485ppm. - after 8L water runoff was 7.0pH and 370ppm. - she is 29” tall and 30” wide. - tricombs still mainly cloudy.....review again in couple of days. June 21/20 - Day 72 - Dry out day - buds are firming up......squeezed a couple🧐 - temps are nice outside so tent able to hold 75 degrees and 51% humidity. June 22/20 - Day 73 - Rezin @ 1ml/L = 120ppm and pH the water to 2.7!!!!!!!!! - Given 2L watering. - No runoff water and I am good with that as I want the low pH water to stay in the medium. - She will be ready soon. Thinking darkness on Wednesday and harvest on Saturday?? June 23/20 - Day 74 - 2L plain water feed - 80ppm and pH to 2.4!!!!!! - not excited about these crazy low pH numbers but doing what we can - her tops are getting really pointy now and her leaves are very yellow. - checking tricombs, I think we are done and tomorrow will be her last day so that I can take down on Saturday. June 24/20 - Day 75 - 2L plain water feed - 80ppm and pH to 3.0 - Going into darkness tonight so this was her last bit of moisture. - drilled a hole into the stem.....was going to do a couple of holes but not trying this method before I decided to leave it with one hole. - into darkness tonight So we finish up the week with her in the dark. Next update will be the harvest!! Thanks very much for taking the time to review my diary!! Sorry for running behind often on this run.........everyone has had a busy life the last couple of months in the world and its been no different here...........a huge Kudos to all the Growmie‘s that are able to keep up with their diaries on daily basis on GrowDiaries.......its a commitment😃👍👍 Mephisto has bread a very nice girl. She is big and sticky and grown very well considering the environment she has been given. Battling the high pH and still turning out as she has is awesome and much respect!!!! Great job Mephisto, can’t wait to run her again.......just so happens I have several more seeds of her😃👍
Likes
47
Share
@DonPeyote
Follow
Requiere mantener bastante baja la humedad en las últimas semanas ya que lo grueso de las colas las hace propensas a la botrytis, ojo ahí. La planta en si es resistente pero es el grosor de sus flores, lo denso de las colas lo que te obliga a tener muy controlada la humedad en etapas avanzadas, creo que es más para tirarla programando la flora para el verano
Likes
5
Share
Captain's log w.7 Hey Hey Hey fellas!!🙌 She got some compost tea, then plain water and some Kelp rest of the week it was a boring week, ass you see in w.7 time lapse video; some small growth, some weight for buds noothing much in there but then suddenly at the end of the week deficiency has started. boom 👻 hope i find out which deficiency is this 😅 till next week peace!
Likes
16
Share
What an absolute stonker. I cant believe how big she has got in just 2 weeks. So many colas and buds. The smell is so good and gettinng some nice colour. Still a long way to go, she is going to be a good one.
Likes
78
Share
@Nebula420
Follow
This out grow for me is extreme, cause daylight time less than 12 hours, Just awful weather, and at night temperature is 15 degrees. Despite all the difficulties Blackberry grows very vigorously and healthy. I am sure this strain will grow in any conditions.Nice genetics. Plant have already started flowering, so fast, and easy strain. For now buds r green, maybe just got the green pheno, or still early and i will see purple colors, color is not important to me. Still weak smells like berries, very tasty. Thanks Fast Buds, nice genetics, and thank to everyone who follow my grow report, Peace!😇
Likes
14
Share
@Mr_Dior21
Follow
Another slow week. I increased light schedule to 13/11. I’m going to slowly lower the time of light until by the time harvest day comes it’ll have a longer dark period. I’m also going to stop feeding the bottle nutrients my soil is moist still so I gotta wait. I’m predicting a couple ounces this grow.
Likes
34
Share
***** Week 10 growth - February 13 to 19, 2021 - Week 2 Flower ***** Mandarin Mimosa is certainly growing beautifully!!! MM1 has been strong and a taller grower from the start. MM2 however has taken off in stretch.......she is also being grown in a 3gal pot so she will be slightly smaller than MM1. These are 1:1 girls but I am really looking forward to smoking this strain😍👍 The terps should start coming out more over the next couple of weeks, Terpinator being added now as well to assist with aromas. Tips up on these girls almost all day long, they are the happiest in the tent this week😂😂 2nd SCROG layer in now....finally😞 Lots of work to do in cleaning up the lower leaves next week. Will do larger leaf strip and lolipoping when they start focusing more on bud development. Light is at 24” only pulling 310 watt, and the meter at the tops of the girls is roughly 28,500LUX. It is feeling like it’s a little strong for them but it’s close......the curling leaves is slowly increasing on the tops. By the end of the week we are at 400watts and reading 38,500LUX, this should be roughly 980 umol/s/m2.......over 900 and less than 1,000.......should be good for going into week 3. Nutrients switched over to flower schedule and following week 2.....but so-called back a couple of items. Adding some other items beyond IPP line so backing off some of the ppm to compensate. Still only one “feeding” per week. Early flower so hitting the microbes a little harder this week and next and then slowly start backing off. I like Remo’s Natures Candy for sweetener because it has humic, sweetener and old school molasses, amongst other things to feed the microbes as they are in coco. Bud Fusion being used now for pk boost.........no more “red kool-aid”😂 Still adding Rezin from Green Planet becuase it seems to boost my trichome quantity.....Terpinator likely this week as well......increase some of the sulfer to increase aromas. Little more detail....... Feb 13/21 - Day 8 - 3.5L watering with CalMag @ 1ml, Nature’s Candy @ 1ml, Resin @ 1.5ml Feb 14/21 - Day 9 - 2nd SCROG added today.....finally. Plucked a bunch more leaves in the process - watering with microbes only today. Recharge has some molasses in it so just adding that. - 4L water for these girls with Recharge @ 1/2 tsp/gal - 320ppm and 6.0pH Feb 15/21 - Day 10 - today is big feed day....its been 7 days. - 3L each girl with all the IPP line as listed plus silica @ 1ml, Nature’s Candy @ 1ml. (Bud Fusion was 0.2gr/L) - 1325ppm and 6.0pH - Girls gave run off at 3L today so didn’t push past that. Feb 16/21 - Day 11 - some feed left from yesterday so added 6L of plain water to dilute it and watered into the girls tonight. - 3L full feed of nutrients for each girl - 800ppm and 6.1pH Feb 17/21 - Day 12 - 3L each girl with Terpinator and CalMag @ 2ml, Nature’s Candy @ 1ml, Recharge @ 1/2 tsp/gal - 775ppm and 6.1pH - increased light power to 350 watts. Now at 32,500LUX.......take it slow over the next week and keep creeping up. Leaves have a bit of a taco shape coming out and looking fairly serrated at the edges.....pushing the light intensity on the tops👍 - leaf colour on the girls is very good......tips are not burnt either. Feb 18/21 - Day 13 -3L each girl of plain water today - added beneficial bacteria and enzymes @ 1.5ml - 330ppm and 5.9pH - was looking for a little lower pH as I have not been checking runoff. - have to do a leaf strip this weekend......start of week 3. - light power increased again, 400 watts now. Feb 19/21 - Day 14 - day out day.......they have not had one in a bit. - humidity was higher today as door to grow room closed today to assist clones with more humidity. So that takes us through two weeks of flower now. Not knowing these girls enough yet, I suspect feeding will stop at the end of week 6. That leaves four more weeks. I will treat the next two weeks like mid flower for nutes, and the following two weeks as late flower. Feed supplements accordingly. These two girls are very happy and looking like we should get some nice colas from MM1!! They are rocking ETS.......looking forward to seeing the bud swelling next couple of weeks💪👍👊
Likes
4
Share
Buenas a tod@s... Bueno otra semanita más de estas hermosas nenas, ya más grandes y empezando a desarrollar sus frutos, la verdad q están creciendo muy bien, sin problemas, aunq hay veces q la temperatura este un poco alta las voy controlando y van muy bien, este cultivo yo creo q promete para bien... Me gusta ver buenos resultados cada vez q empiezo un cultivo nuevo, super contento y las niñas tanbm... 🙌🏻🙏🏻💀😎💪🏻 Buenos humos para tod@s...🔥🔥💨💨 🇦🇷🤝🏻🇪🇦
Likes
27
Share
Welcome to my Frosted Guava Auto Diary Sponsored by Zamneisa & Mars-Hydro. FREAK RESULTS. "HAS STARTED GROWING UP AND THROUGH OUT A LOAD OF NEW WHITE PISTILS" Flower Day 5-20 Days 50-63 7cm put on in the last few days of wk 9 roughly day 59-63 So, not bothering to measure my plant as I thought it had stopped at 68cm and didn't budge for a wk. Been I flushed her and restarted her on plagron/atami/terpinator she decided hey. Let's put on another 7cm and throw out a bunch of new white pistils. Never had this with an auto before. Very strange. I seen her develop the past 15 days. Very slowly. And well. She's not great bud wise. She's a runt that's extremely largy with a very hign leaf-calyex ratio, I've seen other FGA and some killer bud. The leafs are mainly singled fingered leafs that appeared late into her process. And I just can't reach the stems proper and would cause more harm than good. I was hoping she'd get super frosty and I'd be able to make some bubble hash or something. She is at to throw out a whole new load of white pistils. I decided hey, why not throw her under something a little more powerful. At this stage in an auto grow. I really wouldn't bother, as her bud making energy should be mainly spent and at this stage I'd be if anything reducing light % or rasing my light by 5-10cm for ripening. I'm curious to see what will happen. She is drinking a lot more. So I've upped her PK and added some Atami products and will wait to see what happens. I'm not mad about the way she is. I'm holding out hope this is a freak of nature (with autos you really can never make a grow plan). Even if she does put on some mass it'll still be sparce and far apart. And very high leaf ratio. And it's only been the last few days she started growing up again. I only noticed cause the top was closer to the light, and after looking closer. I see new pistils and bud forming lightly. Will be a nightmare to trim. I hope she puts on frost during ripening.... only more time will tell. I'd of been better off with the fem version. She'll easily go into 12 weeks. Diet/Defoliation Was stuffed switched to plagron. Jungle juice did take her a long way. And truly happy with the results. But, I want to try new things and added Plagron Green Sensation and a few others. And Atami Bloom boosters 390-400ppm feed needed to be PH'ed from 7.9 to 6.5 2x a week. Alga Bloom feeds with Green Sensation is 6-630ppm with Silic Rock & pure Zym, 2x a wk. Terpinator feeds are 350ppm 6.1ph and once a wk. (Ambient tap ppm/ph 105-110ppm 6.75-6.7ph). Defoliation was done at the end of wk 8. She was 68cm for 10 days. And took her height on day 60 she she was 71 now she's 75cm tall. Her leaf ratio is very high. And very poor bud sites. More like larf lights. But, I've got a glimmer of hope. I've introduced new bloom boosters and upped the ppfd to 1000ppfd from 850-900ppfd. Lights SF/P1000s were used up until yday where I then put it under my SP3000 at a 14-10 maybe if I'm bothered ill put it back under the 2x100watts if I feel like it. Most days though I reckon I'll leave them under the SP. Co2 Co2 was shockingly high at 1150 in my tents with the exhaust on. But with no high temp it's useless. And has little to no affect. You need 29-31c. It's a fine balance. Cause when your LVPD Leaf VPD hits 32c your stomata stops and the tiny pores close. I've learnt so much about co2 growing. Now I've the right equipment. And with the summer coming in. I should be able to meet the temp/co2 level with exhausts on and been able to use my Dehumidifier in a sealed grow room. When it gets to winter. I think I'll pack it in. I'm just not getting caught out last summer with the heat. I may aswel take full advantage of the high temps and not having a sealed tent and keep exhausts on, just keep RH down. It should be a lot easier. If I like co2, I'll get a controller for fans/temp/ lights & co2. My one now can only control co2ppm and light. I'll get pic readings later. I haven't got it hooked up fully as no way am I using co2 without any alarms. Thanks to my sponsors from Zamneisa & Mars-Hydro for their products and support. Much appreciated to all who viewed, liked &/R commented. Look forward to seen your diaries. Either way thanks for dropping by.
Likes
47
Share
@DonPeyote
Follow
Algunas colas tuvieron que ser amarradas para que no cedan por el peso, comienza el engorde con altas expectativas de esta cepa... Ya veremos si la repetimos
Likes
17
Share
Gracias al equipo de Seedsman Marshydro XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁 Tangerine Snow F1 Fast: Esta gran cepa es un cruce de cuatro vías 75% sativa de (Boost x Tangelo) con (Lavender x Power Plant). Este híbrido Fast F1 proviene de la genética Cali y cuenta con excelentes terpenos cítricos, alta producción de resina para extractos, altos niveles de THC, muy buenos rendimientos y excelente resistencia al moho. Tangerine Snow F1 Fast se puede cultivar tanto en interior como en exterior. Los tiempos de floración en interiores son de entre 8 y 10 semanas, mientras que el tiempo de cosecha en las latitudes del norte es en septiembre, mientras que en el hemisferio sur los productores cosecharán durante marzo. Las regiones climáticas recomendadas son cálidas, secas, húmedas y cálidas. Se trata de plantas altas, semiramificadas, que superan los 200cm y que presentan un alto vigor con muy buena uniformidad. Al igual que muchas otras variedades con fuerte dominancia sativa, Tangerine Snow F1 Fast ofrece una excelente resistencia al moho, así como a las plagas y enfermedades de las plantas. La combinación de terpenos cítricos y mucha resina la convierten en una cepa de muy buen extracto, cuyo método de "lavado" produce muy buenos rendimientos de hachís. El perfil de terpenos cítricos recuerda a las mandarinas y mandarinas y también tiene notas dulces. La producción de THC ha sido verificada en laboratorio en un fuerte 24%, mientras que el CBD es bajo. El efecto es edificante y energizante, perfecto para usar durante el día y las primeras horas de la noche. 🌻🚀 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 5: Definitivamente se ha adaptado muy bien a su hábitat natural, voy con dosis muy suaves de nutrientes ya que ellas tienen prácticamente todo lo que necesitan. El canto de las aves la pone feliz. Poco que agregar, buen sol y buen tiempo 😍