New week for the 7 strain 11 plants grow Everything is going great some little things here and there but nothing to be worrying about so i am happy how it goes one plant had balls and couple have some droopy leaves on them but have feeling my temp is way to low in darkness 16/3/22 I always show the good the bad and the ugly made couple mistakes wiles training but luckily these plants are so strong give some support and the branch that broke will fixes here self 💪🏻 Will be updating Tru the week And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

I am so amazed on how well this plant is growing straight from seed. It didn't occur to me that I should have clone at the early stage of mid - stage of veg growth. Added 2 Tbsp of Dr. Earth Bloom.

It was official week four yesterday for the larger plants. The cherry cola and train wreck have shown sex. I’ve bent the cherry cola but it seems the trainwreck is growing very even with just tucking leaves and removing larger fan leaves blocking the light.

11/3/19 - These bitches are sooo strong! Everything is going very good. Feeding is changing this week. I am so excited to see what they do! The stretch has slowed. I will lower the lights next week. Added a new light for the one I moved to the corner. We will see on how it affects the evromntals. 11/4/19 - Gave a feeding tonight 4 cups per plant. 2 cups are Coco Bloom A&B with Silica Blast. The other two cups are terp, candy, cal, big, sens. This combo of nutes and water volume every two days seams to be doing very good. I premix my nutes in gallon water bottles. I love the Crystal Geyser bottles. They only $1 and have nice handles. I refill each bottle with a Zero Water filter pitcher. That keeps the TDS down low. 11/5/19 - WOW, I just love after a good feeding. The girls just JUMP right up. When I took the environment pic, the temp was a little high while the RH was a little low. It has now laid down to 75/55 with the lights on. 11/6/19 - They are drinking a bunch. Gave them 1 cup each of the solutions to keep them good till Friday.

The GZ is crazy frosty barely into week 3 of flower & is smelling pretty wild. The GSC is less impressive resin production as of now but it smells quality.

She is now coming into preflower and loving the new T5's. She is growing nice and bushy with future tops shooting for the stars. The stretch is definitely near. She will continue to be tied down and has been pruned and defoliated as needed to give her that sexy shape i want her to have in flower. Her terpines are beginning to be noticeable and is of lemons, earthy notes, and loud gas. She is now also getting kelp extract added to the nutes. She is growing very nicely and i could not be happier at the moment. So far OSSC has my attention as their phenotypes have been very nice.

Week 12 (29-12 to 4-1) 29-12 Temperature: 26.4 degrees (lights on) 20.1 degrees (lights off) Humidity: 72% (highest) 50% (lowest) Watering: None. 30-12 Temperature: 24.6 degrees (lights on) 18.7 degrees (lights off) Humidity: 71% (highest) 50% (lowest) Watering: None. 31-12 Not at home. 1-1 Temperature: 25 degrees (lights on) 18 degrees (lights off) Humidity: 68% (highest) 45% (lowest) Watering: Both 2000 ml. PH: 5.8 EC: 1.8 As you can see the PH from the feeding water is a bit low, this is because someone suggested that i can try to lower the PH as my PH pen was a bit too high, aswell as my soil PH. Lamp is at 80% and 40 cm distance. Happy new year growmies! 2-1 Temperature: 25.5 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 47% (lowest) Watering: None. 3-1 Temperature: 25.2 degrees (lights on) 18.4 degrees (lights off) Humidity: 56% (highest) 49% (lowest) Watering: None. 4-1 Temperature: 26.4 degrees (lights on) 18.8 degrees (lights off) Humidity: 64% (highest) 44% (lowest) Watering: None. I did a soil slurry test to check my soil PH and EC. I dont know how accurate this is, but these are the results: Water used for the test: PH: 6.5/6.6 EC: 0.0 Biscotti #1: PH: 6.7 EC: 0.8 Biscotti #2: PH: 7 EC: 0.6 No pictures of the plants today.

This week I put up a long video that features my new tent and new clones from these current clones that are flowing. The hairs are turning color now and I have given them there last feeding, only straight ph balanced water from here on out to flush the plants so they taste nice.

Now we’re catching up. Thank goodness. Things are filling out underneath and I can’t wait to see what the next few weeks bring. I hear they get super frosty. 🌱 👊🏻

Frostbanger Plants 1-6 Week 9 May 18– 24 FLOWER 5 Nutrients : 3 gal GH Micro 20 ml GH Gro 10 ml GH Bloom 30ml CalMag 15 ml Recharge 10ml Green sensation 15ml Power buds 7.5 ml 5/18 PH 6.67, PPM 935, temp 68.5 1 ltr each 5/20 PH 6.67, PPM 1330, temp 68.5 2ltr each 5/23 PH 6.6, PPM 1570, temp 68.5 2ltr each 5/24 pics & vid Since all 6 gals are getting frosty, I did some trichome pics. The statistics on Frostbanger indicate 50-day flower. Pics show mostly clear and milky. There are a few with amber trichs and many orange pistils indicating maturation. At least 3 more weeks for maturity on these gals. I continue manual control of the environment and using 3 circulating fans and the 4” exhaust vent from my 3x3. I have the AC pushing air in and the exhaust pulling air out. This creates a neutral pressure tent environment-neither positive nor negative. It looks like growth has stopped and plant height has been reached. Now is the time for buds to fatten and frost up. All 6 of them are short remaining less than 3 ft. They range from 15 to 31 inches. #4, 5 &6 are showing some fade, particularly #4. Upon opening the tent, a melon smell comes off the buds if I get close, and more stickiness was observed during the process of defoliation. They are living up to the new strain’s name. #5 is the frostiest followed by #2. Wow week 3 of flower and that much frost already. Before FastBuds announced the strain name and characteristics, I was disappointed that FBA2502 could be an indica sleepy strain but the universe provides what you need at the time. The new strain profile indicates a whopping 29%THC with mainly sativa uplifting, euphoric, social effects with sweet fruity flavors which I love and enjoy. In addition, I recently bought a dap press and this strain is frosty and resinous. She will be great to press for live rosin. FBA2502 is FROSTBANGER. Meet Frostbanger Auto, an autoflowering and Indica-leaning hybrid packing a staggeringly high THC content averaging 29%, making this one of the most potent strains on the market. It was created by Fast Buds through crossbreeding Gorilla Glue and Chemdawg, two equally iconic strains. Growers must know that these difficult-to-grow plants will pose specific challenges in terms of environmental control and nutrition, making them best suited for cultivators with some experience under their belt. The flowering cycle is short, averaging only 50 days, and yields are usually around 300g/m². The Frostbanger Auto flavor and aroma are both mouthwatering with a delightful combination of sweet, fruity, and flowery notes. The high is mainly Sativa-driven with uplifting and happiness-inducing effects that lead to euphoria and a general sense of well-being. You might feel sociable and talkative, but too spacey to say something. Following this surge of energy comes a deepening sense of relaxation, leaving you sedated and completely at ease with the world. Due to its potency and these long-lasting effects, medical patients hail Frostbanger Auto for treating chronic pain, stress, and even depression. Measurements: #1 15” #2 20” #3 17” #4 30” #5 31” #6 24” P.S I added a no churn ice cream recipe in week 4 of Natronas recipes. It is easy 3 ingredients. I bought Mango puree instead of fresh and reduced that to reduce water content. Try it. 😋 Your likes and comments are appreciated. Thanks for stopping by. Growers love 💚🌿 💫Natrona💫

Week 8: Water and wait This Lady is SUCH a blast to watch!!!! Her giant colas and sugary orange nugs just sparkle with resin. The structure is GREAT for avoiding bud rot which would be my major concern here. She has been flushing for a week. I assume she has 1 or 2 more in her. Really excited to write this smoke report.

Esta semana a sido clave ya que vamos cortos de tiempo en este proceso, me hubiera gustado ponerlas antes Les empeze a echar liquido bio-bloom y an reaccionado bastante bien ☺️ Le emos añadido tambien al sustrato un poco de carbon para darle ese nutriente que tambien le aporta la energya a las raices 💪

Nice to get the first month of flowering done! I believe these females will take just over another month, last 2 weeks of additives..

Plants getting real sticky and buds are getting fatter Just 3 weeks to go... Will defoil them hard next week to lower RH in the final weeks

I think the situation is very good. Im exciteed to see lst result Day 20, lst show good results. She drink so fast now. Day 21, going for week 4, what you think about she?

Recovery at its finest, that's what you will see on week 4 around here! Guess who's loving the CO2 with high temperature? Thats right, all plants are! The comparison of last week with this week have such a difference, on day 24 I introduced a DIY CO2 bottle, the recipe consist in: -CO2- 2 cups of sugar 1 tablespoon of yeast 1 tablespoon of baking soda 1 later of warm water Mix all ingredients on a bottle, make a nail hole on the cap shake a little (when shaking put your finger on the nail hole, you should hear a hissssss when you release the hole) use it when lights are on, increase temperature to 30-35C, watch for high levels of humidity, and voila! Any other details you want to know ask way :) I haven't started any LST yet, I am waiting for a bit more growth to start bending, I have to make sure all 5 plants will have enough space inside this 2x4 tent. All suggestions are welcomed :) Thats is for now, Stay Lit folks!