So I heard that matterhorn is an unstable plant but I never thought it was so unstable. One fenotype are doing well but plants from another mother are struggling. I checked the condition every day and every day the EC dropped and the pH rose. Which meant eating, but still showing problems on the leaves. During this period I made a mistake with the water temperature, namely when the water temperature is above 20 ° C the oxygen in the water drops drastically and these were the beginnings of my root problems. I didn't know it then, but later root rot appeared.

D4 - YES! We have lift-off!!! Today both seeds poked up. BOOM! Yesterday, I also put in my new humidifier in the tent, and man, this little thing is a BEAST. The amount of water vapor it is able to push out is insane. I use an Inkbird controller to... ummm... control the humidifier so that the humidity in the tent is 80% plus/minus 5%. I'm planning on running this high humidity for the first week or so and then dropping it down. D5 - I adjusted the light to 80 cm (about 31") above the canopy, resulting in 300 μmol/m2/s at canopy level. A bit high as I usually keep it around 250, but it should be alright, I think. D6 - The left girl, #1, seems to have died. Her leaves never fully emerged from the seed, and now she is entirely wilted, laying on the soil. So yeah, she is a gonner, I think. No idea what happened since she looked okay yesterday, and the other girl is already 5 cm (2") tall. Strange, but there's a first for everything, I guess. I already have a new seed soaking in water to be planted tomorrow. She'll then be six days after the other girl, and while probably noticeable at first, I don't expect any real problems during the grow. Hopefully, it'll germinate, but if not, c'est la vie. D7 - After soaking the seed for 24 hours, I rolled it in myco, and planted it in the first pot. However, I removed and replaced some soil in the center of the pot before planting, just in case something was wrong with the soil. Fingers crossed that this one will germinate just fine. On the other hand, the second girl is doing her thing just fine. I removed her humidity dome, though, as the RH in the tent should be high enough. D11 - End of the first week of veg and the third seedling popped up. BOOM! Now let's hope this girl survives, considering that the first girl in that pot died. On the other hand, the second girl is thriving; already 9 cm tall and 6 cm wide. Her first set of true leaves is slightly twisted but not too severely, and the second set looks fine. She is a bit leggy, so I added a couple of toothpicks for support. I have been asked in DM why I have Avocados on top of the soil. The reason is simply for feeding my worms and encouraging breeding. Happy worms = happy soil = happy plants. For anyone interested in learning more about Avocado Tek: https://youtu.be/JFRtNU6W9i8?t=400

Wow 19cm taller this week! Nice growth so far.

She's coming on nicely packing on the bud sights I like the structure on her removed some leaves and waste from the underside introduced sumo boost a good week should see some nice changes soon will get some better pics soon ...put up bew pics and video in better light thanks for reading happy growing guy's

Topped them end of last week, still not given them feed as the farmyard manure they were planted straight into seems to be giving them what they need so far, I've given them rain water when they needed it. Hopefully the sun will return this coming week 🌞

8/2: Everybody is potted up in a 3 gallon pot now. I sprayed them all with Boom Boom Spray one day, and foliar fed with kelp and Superthive all week. They got their first real feeding with TPS One and seemed to like it. I also gave them a little molasses.

Day 28: I have started into week 4, and im curious when the first sights of flower begin. i decided today to cut down my bags, because the lower branches didnt had enough space, maybe this is even the reason why they are so bushy. lets see how this is working now, i bet it will be much easier to water them now. i also cutted one leaf, because it had sunburn because of waterdrops i didnt recognized. The smell is getting also stronger, but still couldnt figure out which plant smells so nice. it is a very nice and fruity mixture. i also decided to Stop LST through binding and bending. i will just Scrog it soon, that should do the part. Day 30: I hope the Temperatures wont drop anymore. had a night with 10.6 °C. The Pineapple Express and StrawberryGorilla did not liked this a lot. But Blueberry, Northern Light and Weddingcake seem to be stronger against the cold. I watered them a bit today, and will also stop giving to much fertilizers. maybe i will skip one Week of fertiolizers, and start again when bloom is starting. Day 32: i think i was again not patient enough. I will just keep them watered until they start to bloom. Will install a SCROG net in a few Days. My worries: 1. I think my Pineapple Express and the Strawberry Gorilla really didnt liked the cold Days. There were Temperatures about 10 °C in the nights. The PE seems to be stunned a bit. The others are developing gut actually, but i hope to have warmer climate soon. My happies: The Red Mimosa is still developing great. Also the Northern light is growing pretty good, and they dont show any sign of struggle because of the low temperatures. My biggest is 30 cm (Red Mimosa), the smallest is my pineapple Express, its only 20 cm so far, but still growing bigger somehow.

It's a nice change of pace to have these warmer temperatures, even if it's not quite spring yet. Low 40s during the day is a lot more comfortable than what we've been dealing with lately. Hopefully, this is a sign that spring's around the corner. My Skunk Apple plant sounds like it's finally getting on track. After a rough start, it's good to hear things are looking decent. Hopefully, it'll keep looking better and better.

Hello my friends 👨‍🌾👩‍🌾, Out of Jail, great news! The Cherry cola, continue his maturation, Buds continued to bump this week 🌲🍒🍒 Harvest probably in 7/10 days. 💦I've given this week 3x 2l/plant - Water + terra flores + cannaboost - Water + cannazym - Water + cannazym PH@6 I'll stopfertilizer, senesence look started. Lamp 75% See you next week and have a good week end my friends 🔥👨‍🌾👩‍🌾 Thank to Mars Hydro and @marshydrococo2 for sponsoring the FC3000 ❤️❤️, as well as @Fast_Buds for sponsoring the Seeds ❤️❤️ If you want a litle discount on your Mars Hydro order, add this coupon to your cart, Ju_Bps Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light 42 Fast Buds - CHERRY COLA 🍒🌲 https://2fast4buds.com/seeds/cherry-cola-auto

Alright guys, now we're up to date I didn't write that much before because I wanted to get here first. Actual date Feb 10th They're looking good No nutrient burnt so far 24/0 Schedule Watering every 2 days but continue to spray on them like 2 liters everyday to increase humidity lvl to optimal condition Temp is OK Wish it was better but have to repair A/C Anyways bout the girl This gorilla girl XL is slow but developing good, taking her time to grow while it's fully LST, she's redirecting her energy to the other stems and leaves plus main trunk and slowly continues to grow its main stem We're already on 1900PPM We've been giving nutes from the very beginning plus bloom to make sure she gets loaded, but certainly lil bit not to mess up too much with her so we already on 1300ppm bloom stuff 😏 Want to get big yield let's see if we as much as we want

Bienvenidos la semana #3! 😁 Día #18. Crystal Candy XL Auto ha empezado a crecer de forma espectacular! Northern Lights auto ha mostrado las primeras preflores y también están empezando a crecer muy rápidamente Royal Bluematic ha pasado por el bloqueo de nutrientes por el ph alto en el agua de riego (es la única strain que la ha manifestado). Se ha regado con agua con ph ajustado para controlar el bloqueo. Orion F1 están yendo más lento que el resto...  Día #19. Crystal Candy XL Auto y Northern Lights han empezado una carrera hacia el cielo Se decide empezar con LST en todas las variedades (ver fotos)  Es primera vez con LST, así que espero hacerlo bien! Pero supongo tendré una curva de aprendizaje o ensayo y error Día #20. Crystal Candy XL Auto se muestra muy sedienta. Sus compañeras siguen con 100 ml de agua desde hace unos 4 días, y ella necesita 250 ml de agua cada 3 días (también es la más rapida). Se ha regado Crystal Candy XL Auto con 250 ml de agua más 2 ml/l de Bio-Grow de Biobizz Es necesario ajustar el LST a diario  Día #21 Se hace un riego con 100 ml a todas las plantas (excepto Crystal Candy XL que se regó día anterior). LST es exigente en su revisión diaria pero divertido! 😃 Día #22. El tiempo se está volviendo soleado y hacemos el primer baño de sol.  Crystal Candy XL Auto está respondiendo muy bien al LST, necesita ajustes a diario Royal Bluematic tbm responde bien al LST. Las Orion F1 están yendo lentas... No sé si cogerán velocidad la próxima semana He detectado que Northern Lights tiene una pequeña plaga de minadores de las hojas (solo una hoja afectada). Para atacar la plaga y por precaucion, se hace aplicación foliar a todas las plantas de jabón potásico y aceite de neem.  Día #23. Descubro que he quemado algunas hojas tras la aplicación foliar de ayer y meter demasiado rápido bajo la lampara... Salimos al exterior! 😂 La idea es dejarlas en exterior el resto del cultivo, a no ser que vuelvan las lluvias (espero que no! 🙏) Pequeños ajustes de LST  Gracias por leerme!  😄

Día 17/11 se hace el cambio del fotoperiodo a 12 horas de luz Este día también regué con EC de 2.0 y pH ajustado a 5.8 en esta oportunidad agrege un poco de Pro Silocate de grotek que tenis guardado. Se mantiene el uso de cloro a razón de 0.2 ml x 4 litros de agua. Baje la luz a 60 cm de la planta más alta del cultivo y se mantiene a 100% de potencia 23/11/24: Realicé defoliacion, mantengo el foco a 60 centímetros. EC se mantiene en 2.0 - pH 5.8

June 20 Week 8 All the plants are growing at a normal pace. I lost two the plants seedling. Water once this week. I noticed some yellow spots on some of the leaves. Happy grow. June 26th I got males, Please see pictures above for recognition of males. Happy grow!

OOOOOH at this time i love all of you, growmie 😍 200gr of pure happiness, never before! 🙌 Buds are compact like rock, shine like diamond...it's unbelivable, looks perfect! At last, mold take me about 20g of buds 😩 But it is ok, the jar is overfull and i'm so happy XD Now let's wait for the right taste......for now is greatful! 😜 Thanks to Dutch Passion for this opportunity, i'm really proud!! 🙏 Thanks to all of you growmie, for your support 🙏 to the next adventure!

It’s the 1st week of flower I flipped the plants to 12/12 a few days ago. There is a lot going on and a lot of cool and amazing things coming in the near future. Make sure to check out my YouTube page. I bought me a DJI gimbal this week. Might be my new favorite toy. The temps are starting to break for the summer. I don’t see it being very long until winter is here and it’s time to use a heater and not an ac unit. All of the plants are healthy. The plants have all grown so well I turned down the light intensity a bit today the plants didn’t seem like they was starting to strech very much. Hopefully the lower light intensity will make them strech out just a bit

Matilda has stopped making new fan leaves and started stacking on colas now. She has definitely stepped up her loudness as well. I could just sit in the tent and enjoy her complex; fruity, funky cheese, darkness all day long. I still have 4-5 weeks until I even think about harvesting.

Well pretty big reveal this week. You get to see all the shit & roots.....and corn. Watering the girl proved to be hard to figure out. I've been watering her everyday because of the root reveal. And all that water goes down the pot. So I was worried I would over water. Well by now you know. I under watered. But I got it all figured out. I'm not ready to reveal the custom saucer I made yet. I'm still trying to grow these over the bowl roots but they were not ready for any of the reveal so now the exposed ones are tiny and the under the soil ones are much bigger. It is what it is. I will remove the soil on the side roots in the next couple of days so I can position them where I want them then repack with soil again.

~ WEDDING CHEESECAKE FAST FLOWER by FastBuds ~ Well fam, here we go again with another epic strain from FastBuds Fast Flowering stable. After having such tremendous success growing their Gorilla Cookies Fast Flower outdoors last year, I've decided to run another of their fast flowering strains outdoors this year... Wedding Cheesecake Fast Flower! The best description of this awesome cultivar comes directly from my friends at FastBuds which is as follows: "A delight for the mind and body: Wedding Cheesecake FF (Fast-Flowering) is a delicious strain that offers XXL yields in a 7-8 weeks flowering cycle. This terpene powerhouse produces loads and loads of mouth-watering vanilla-creamy-cookie-scented terps with hints of citrus and cinnamon. In addition to its delicious aromas, this variety grows very well in both indoor and outdoor setups, yielding up to 650 g/m2 without extra maintenance, making it the ideal strain for beginners as it allows you to maximize yields while minimizing work. This super-fast feminized photoperiod version offers upbeat and energetic yet deeply relaxing effects that are perfect for consumers looking for a heavily focused, motivating, and creative high. It’s the ideal strain for those needing that extra energy boost to start a busy day on the right foot. Wedding Cheesecake FF boasts chunky, large-sized buds with a thick layer of silvery-white resin and bright orange hairs scattered all over: that just screams ‘quality’. The lime-green flowers sparkle with an array of hues ranging from dark to light green, to magenta and purple, and reek of a delicious aroma that’ll remind you of fresh store-bought cheesecake. This is an XXL hybrid that grows extremely tall in height, reaching up to 3m with one huge main cola and multiple long side branches that can withstand enormous yields of up to 650 g/m2 with ease. Wedding Cheesecake FF is extremely resilient to the elements and can be grown in almost every climate as long as you’ve got the space and basics covered, making her an excellent choice for those looking for large-scale harvests with a quick turnaround time without much effort." ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Setup: This is going to be an outdoor grow, but I have started the Wedding Cheesecake FF indoors as our weather is still too cold to put her outside (nighttime temp's dipping regularly into the 30's℉). The plan is simple... let her grow inside under a 19/5 light schedule until the nighttime temperatures stay above the mid 40's℉, at which point she'll be moved outside and transplanted into the soil which I have already setup and inoculated with beneficial microbes, and then let the fun begin!🤪💚 ____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Updates: 3/28- Day one for the FastBuds Wedding Cheesecake FF! I initially soaked the seed in lukewarm tap water for 24 hours, at which time the shell had split and a root tip was visible. I then transferred the seed to a pre-soaked peat pellet which was placed in a 1.5"x1.5" plastic seedling pot which was set into the bottom half of a Solo cup that I cut in half. 3/30- As soon as I could see a root beginning to emerge from the peat pellet I transferred the pellet, that I first coated with Extreme Gardening's MYCOS, into a Solo cup that had a 70/30 Coco/Perlite mix that was pre-amended with Gaia Green 4-4-4 slow release dry amendment, along with wiggle worm castings. After placing the Wedding Cheesecake FF in the cup, I watered it in and placed a humidity dome over it to ensure that it stayed in a relatively moist environment as it gets acclimated to its new 'temporary home'. 4/1- The Wedding Cheesecake FF has taken right to her Solo cup and is looking stress free. Her vigor and color are both exceptional as well! 4/3- Well there's the first week for this little girl. Stay tuned in the coming weeks, especially when she gets moved outside and really starts to take off. I can't wait... can you? Thank you for checking out my diary, your positive comments and support make it all worthwhile! 💚Growers Love!💚😎🙏

Tuesday Ok so the plants are doing really well. One of the kalini Asia plants is in the only regular pot I’m using now. It’s a little larger than the AutoPot XL’s so therefore the plant is slightly bigger but spread out because I topped it a while ago and today I took all the bottom leaves as well as quite a few of the lower lateral branches that well small and weak. Hopefully this will encourage the energy to where it want it - The main growth tips! I think it was the other kalini Asia that is in the AutoPot XL that I ended up ‘super cropping’? Do correct me if I used the wrong term. The main growth stems were quite a lot higher than the large lateral branches so I squeezed the stem with my finger and flopped the main colas over then taped them and tied them to support them. The canopy is MUCH more even across all plants now. They look a bit bent over at the moment but I bet when I look tomorrow they are all facing the light again. Magic! They are def in the stretch phase now. They are growing like crazy. I’m really glad I did the nasty job of pulling each plant out and tying it down and cutting off the shit that won’t grow anything good. Oh I also gave them a watering from the top using lots of microbes (ecothrive biosys) and molasses dissolved into warm water. The res was basically empty and honestly the AutoPot XL’s don’t even look wet at all on top even though they are getting all the water they need. They don’t react negatively when I occasionally water goodies in from the top so it’s all good!!