The Grow Awards 2026 🏆
Likes
26
Share
Gracias al equipo de Herbies Seeds, Marshydro y XpertNutrients sin ellos esto no seria posible. 💐🍁 Runtz Punch: Runtz Punch no es una cepa para personas de mente superficial, está hecha para reflexiones filosóficas, euforia dichosa y un gran subidón corporal a la hora de dormir. Es la cepa perfecta para romper la tolerancia en cualquier fumador experimentado. ¿Cuál es su secreto? Esta cepa tiene un gran impacto con un 29% (sí, 29%) de THC. Es mejor reservarla para noches de ensueño bajo las estrellas, deja que tu mente divague mientras tu cuerpo absorbe todas las cualidades terapéuticas que tanto necesita. 🚀 Consigue aqui tus semillas: https://herbiesheadshop.com/cannabis-seeds/runtz-punch-herbies-seeds 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 11: Finalmente estoy contento con los resultados pese al error que tuve con el temporizador, lavado de raíces para esta maravilla y corte final en una semana.
Processing
Likes
16
Share
Likes
23
Share
@Autoduck
Follow
Note to self when making butter always over estimate not under 🙈😂
Likes
151
Share
@CANNASIM
Follow
------GENERAL COMMENT------ Girls are moving forward, a lot of growth for the week, the two strains are absolutely different in terms of structure. Unfortunately the three Candy Kush did not sprout, so I will run only this two girls for this cycle. Down a bit the watering mainly doing a feed every other day, trying to manage the root mass to expand. Choose to do natures candy also in veg since i'm using recharge regularly, is 0-0-0 not noticing a lot of EC raise with it, velo kelp came in to play also. One dose of sensi Cal Mag this week since i notice some paling going on, my medium is inert by the way. ------SM.BLUEBERRY COMMENT------ She is creating a lot of foliage compared to the AK, both are in the same hight. May top in a week, this will depend.
Processing
Likes
Comments
Share
She's looking very beautiful in her 3rd week of flower right now,I'll be topping her on her 4th week probably.looks very healthy,I think she's loving the soil organic mix I prepared for her,
Likes
27
Share
@Bluemels
Follow
Seit 4 Tagen nun endlich befinden sich meine 3 Ladys in der Blüte. Schon nach 2 Tagen haben sie einen ordentlichen Stretch hingelegt. Leider bilden sie immer noch Zahlreiche Seitentriebedann aus, ich war auch schon kurz davor diese wegzuschneiden, doch ich befürchte sie könnten dann zwittern. Allerhöchstens entlauben kommt für mich jetzt noch in Frage, um die Qualität der Ernte nicht zu gefährden. Da nehme ich lieber weniger g in Kauf 👌
Likes
12
Share
@Bluemels
Follow
Tag 47: Wieder mal entlaubt und ein 2 Netz eingebaut 😀
Likes
16
Share
July 27: staring week 7 and she seems to be preflowering but I’m going to force flower this auto by sticking it in the dark garage with my photoperiod plants. The change to 12 h of darkness for a couple weeks should kick it into flowering mode. I’ve seen a few growers commenting that their Auto Overdose wasn’t auto flowering and I don’t want to wait any longer to find out. It’s the end of July and things need to be flowering by now to finish in time before winter. The stem I broke a few days ago is showing signs of life and looks like it will more or less recover. Update: Changed my mind and removed stem as it was slowing overall growth. Cut the loss and move forward. C’est La vie, etc. July 28: plant has an okay shape considering I broke a stem. Nice lower branches came up after the plant was topped. Looks promising. July 31: looking good. Removed a single large fan leaf at the top that was shading too many bud sites.
Likes
269
Share
Day 122 Flower 59 Remaining 16!??! so close to flush!!!! OK so I think everything is going great! I'm guessing/ hoping the yellowing leaves is just the plant nearing the end. Though why is just the one plant starting to yellow already? Had to use about 12 yo yo's to help the leaning buds. Some of these poor branches are barely holding on under the weight hahaha Gonna get a little 24x24x48 drying tent. I'll move the carbon filter there for a couple weeks. wont need it in the big tent for a few days. Hope I'm not forgetting anything here. I'll go over the comments I'm sure its in there, but if its not, how do I know when to start the flush??! and do you only give water? I use RO, do you check the PH and adjust that and thats it? You can see in a couple pics the plant on the right is much shorter and the colas are all rounded. weird. My plan for harvest. was planning on using that drying tent...... with a osculating fan at the bottom? or not needed? At harvest I was gonna cut off branch, trim the fan leaves only then hang upside down in the tent. trimming the sugar leaves after drying before curing. All G??
Likes
16
Share
@Mrg7667
Follow
Lotss of updates! Got a decent commercial LED 600w so just about same wattage as my last three lights but way more coverage and light penetration🙏 I dont have the dimmer so that might be needed as the babies get taller! Ended up cutting about 6 clones from each plant. Just going to wait for a little recovery then im transplanting into 5 gallon for flower!
Likes
46
Share
Strain. Purple punch 💜 Breeder. Seedstockers🐿️ light. Mars hydro ts1000💡 soil . biobizz lightmix 👊 nutrients. biobizz grow 🌱 biobizz heaven Growing really well she's been topped and I shall veg her for at least another 2 weeks !! 📢📢 UPGRADED to the MarsHydro ts1000 EFFICIENCY WHITE LED GROW LIGHT: Newest SMD LED technology provides highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS/MH; MARS HYDRO TS 1000 growing light makes you get 30% higher yield compared OLD blurple led lights, Max 2.0g yield per wattage (power draw). LOWER RUNNING COSTS & HIGHER YIELDS: Actual Power 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 80x80CM, Max Coverage 100x100CM. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO reflective grow tent, or by crossing over using multiple TS1000. SUNLIGHT FULL SPECTRUM LED GROW LIGHT FOR WHOLE GROWING STAGES: 760nm IR/660nm Red/5000k blue/3000k warm white light. Infinite close to natural sun light, TS1000 suits for all plants whole stages indoor growing, rapid plant response from seed to flower, achieving maximum quantity and high-quality yields . CUSTOMIZED GROWING NEEDS WITH UPGRADED DIMMING DAISY CHAIN: Newest TS series growing lights support multi-lights connection up to 15 lights for your various growing needs and stages; TS1000 light auto sensing power supply works on both 120VAC, 230VAC and 277VAC, suits for Large Rooms and Commercial Setups. HIGH REFLECTIVE & NOISE FREE DESIGN: High reflective hood, noise fanless free TS series grow light. Quickly aluminum heat dispersing material increases light intensity up to 20%, reducing light lost to aisles and walls, allowing your plants receiving more energy without burning your plants in maximum headroom Shes up and running 💚🙏😊 Thanks @marshydroled
Likes
16
Share
@valiotoro
Follow
Hello everyone 😎 Week 10 of flower for the strawberry banana auto from Fast Buds 🍓🍌 Only one plant left ! She grew fast with beautiful color,for the nutrient 4ml/L terra bloom & 1ml/L power buds next week i will introduce Green sensation at very low doses from Plagron ✔️ Now only plain water💧 Amazing smell 🤤super fruity 🍓🍌 The buds are super sticky ✂️ Mars hydro SP-6500 100% Have a nice day 😋
Likes
8
Share
Hello everyone, fellow growers! welcome to peaky's gardens I had so much fun growing this little girl in a small pot and with a frame around which I twisted my plant I wanted to test her resistance and my experience
Likes
19
Share
Very busy week. Completed three upgrades to chamber. 1. Got new 1200W COB LED light. Bright sharp light. 2. Got new Humidifier which has a built in hydrostat and is set to 55%. 3. Got a Autopilot APC8200 CO2 controller and can now inject CO2 automatically based on set range around 1300PPM. The CO2 is injected to chamber with the intake fan on and it seems to hang very well. At night I turn the exhaust fan on to make it cooler for dark period. Hopefully growth will increase this week. Also started LST with both.
Likes
203
Share
📆 Week 14, 11 - 17 April 2024 11 April - Cut off all yellowing leaves. Reduced light power to 50%. Began the Flush. 12-13 April - Flushed plant. 14 April - Harvested plant and hung in closet for drying. 15-17 April - Continued to hang in closet for drying. 📑 I decided to trim this plant before hanging because of its size, and having the time to dedicate to it. Either way it would have been sticky. It will hang it for 7-10 days in a somewhat climate controlled closet with a RH 60% and temperature of 65 degrees F using a small fan for circulation. Then it will be cut and placed into 1 quart mason jars with Boveda 62% TerpShield, and burped daily until a RH of 62% is maintained for long term storage. Overall Grow Review: With all environmental conditions staying within ideal throughout the grow, I am impressed with the size of these buds and resin production. But she was not on the bigger side of the auto family varieties as far as yield. I contribute this to size of the plant. The breeder claims a height of 100 centimeters, where this plant only achieved about 75. Time of harvest from seed the breeder claims 65-70 days. I did have to add an additional week of flowering to get her matured due to the higher sativa genetics, but that was expected. The time of this harvest was 94 days (42 veg, 52 flower). Would I grow it again? Absolutely! As with any autoflower I’ve grown in hydroponics, they have taken this long, under these conditions, without any major manipulation - seed to harvest just over 90 days. The only major differences are size of plant, and type of bud - not time to grow and properly mature. I did not get the wet bud weight. I still can’t understand the reason for this number, it is the most irrelevant thing to add in this process because it just doesn’t matter. My opinion. Smoq Review: She has a nice profile of terps and the taste doesn’t leave your mouth dry. The high is very pleasant and makes you feel energetic and talkative, leading into an evening of good times. There is not a lot to say when the it’s the right one for anytime, recreational or medicinal, it’s definitely a depression eliminator! 🍶 11 April nutrient changed to RO water 💧 Using reverse osmosis water with EC/TDS at 0 🔆 Light power at 50%, DLI 40-45 canopy coverage at 12hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this grow. Thanks for the looks, reads and stopping by.
Likes
11
Share
The plant is growing pretty fast. Royal queen seeds look like they have a good breed of seeds. Highly recommended. Plant is very healthy and has no deficiency biether pests. Enjoying all the biobizz nutrients that i am giving her.
Likes
34
Share
@MrGrow
Follow
29.07.2023 🌱 110 giorni dal seme 🌼 17 giorni fioritura 💦 1.8 litri/48h 📈 ph 5.9 ec 1.6 Le piante stanno benone! Si sono allungate molto durante le prime 2 settimane di fioritura ma ora hanno smesso di allungarsi e vedo molti siti di fiori ovunque. La white widow è qualcosa di incredibile.. non vedo l ora di vedere i fiori crescere😍