Monster&Midget 1st grow.

BREEDER: BARNEY'S FARM TYPE: ZKITTLEZ OG AUTOFOLWER, FEMINIZED AUTOFLOWER BACKGROUND: INDICIA DOM SETUP: HYDROPONICS MANUAL HEIGHT: TALL FLOWERING TIME: 9-10 WEEKS CBD: UNKNOWN THC: 20%-24% YIELD INDOOR/OUTDOOR 400G/600G WILL GIVE MY RESULTS ON WET/DRIED WEIGHT WHEN HARVESTED Cannabis Type CBD AUTO 20:1 CBD Autoflower, Hybrid Autoflower, Feminized Autoflower Breeder Fastbuds Setup Hydroponics Manual Flowering Time 9-10 weeks from sprout Yield medium Height Up to 35 inches THC 0.3-0.85% CBD 10-20% Flavor Honey Light set at 80% 12 hours, seeds went in grand. Made a few beginner mistakes. Like pouring heavy water loads straight from cup, overflowed the seed area too quickly. Hopefully they'll still push up. They are only 12 hours in the coco. As I said, few silly mistakes. Need to get nutes made and have pre ready made spray bottles, it's okay to make a batch and hold it up to a week. In this case I only used what I said I used per plant to mix up the nutes. So if I use 150ml of coco A and that's 2ml per litre recommended, then you use .3 of nute to the value of water, same if you only mixing 500ml just add .5ml of solution. I have the fan set up as an intake air flow, so I have that to come on for 20mins and off for 20mins. 1st feed 50ml (per plant) of coco A ph6.4 ppm 440 2nd feed. 50ml of coco b 4 hours later ph.6.5 PPM 420 3rd feed 50 ml of B-52 12 hours in 6.2 PPM 220 4th feed Voodoo juice 50ml--ph 5.8 ppm 350 21 temp solution. Okay so, I'm running into a problem. The coco coir I was left I could get in my tight time frame was from a pet store, and when I pour say 100ml around 80% is ending back up straight on the plate, there seems to be no soaking from this coco coir. I'll post pick of the brick later, maybe I should have given it a good wash, or rinse. Having serious doubts if these hydro seeds will even shoot. And I think the mix is not tight enough down, maybe why I'm getting so much run off. Will update on run-off PH and PPM (update 12/24/2021! Checked run off ppm 2020 but PH 6.15) that's mainly cause the way this substrate retains water, IT DOESN'T. transplant will be done in good canna coco)12/23/2021when I turn them on after there first full 18/6 complete. I have the solutions made up, because it's not soaking up this are going to need small but regular doses of the same nutes for days, I'll try give as exact reading as I can. Just until I can transplant into some decent coco, that's If they come up. So, I went to my grow exactly 24hr (Day 1)since I first turned it on. And we have growth in the CBD AUTO 20:1 in hydro. So, hydros are off out the gate, leaving organic eating it's nutrients dust! So, I'm learning, I've made up many solutions and I'll just have to spray one every couple hour of the same nutes for 2-3 times and change nute, only way to deal with deal terrible drainage issue. I'll just have to baby them until I can transfer to their resting place. (WEEKLY FEEDING CHART)(Day 1) First feeding sprayed into substrate with Sensi coco A will do twice more, hope to use at least 50ml of made up solution on each plant over the 2-3 sprays (solution PH 6.45 PPM 448, 21.5c) Feeding 2- gave her the last spray of solution B dismorning 6.3ph pmm430, 2-3 feeds within 4 hour window 50ml per plant. Feed 3 B-52 50-70ml per plant. 6.2ph PPM 220 2-3 time within a 4 hour window Feed 4, 2-3 feeds of voodoo juice PH 6.4 PPM 78 21c temp Looks like zkittlez is starting to pop up in hydros too, CBD is standing on her own first stem in hydros, organics are still sleeping it off.(12/15/21 update 52hrs growing really well, have to baby them though, lot less fun off after the 48 video, this doesn't mean water absorbing is any better, I'm just doing a lot less watering, on top of what I added I give a total of 8 feeds a day 4 of each nute the last 4 is on the last 4 hrs of the light and it's only about 10ml of each solution. PPM on 48 hrs was still high 2070 ph was a little higher but still okay PH 6.47 This will be my feed chart that I am trying this will be my daily method, so, unless PPM/PH changes, which I can't see happening, this is the only update about feeding for this week. Rest will be pics/results or if any process changed I'll update accordingly, I'll mark the day down and issue. Thanks for reading this week.. Pics and resluts update on day 2(52hrs) and the week coming. Thank you from gottagrowsometime HUMIDITY CONTROL 12/25/21 So, I noticed when the light is on after a while the humidity can get as low as 52% but goes up to around 55 when the intake fan comes on. So, I got a bowl, put it in between the terracotta pots with some hot water and epison salt and when the fan is off it can go up to 67% and 60% after a few mins of the intake fan being on. So, really happy with an easy fix, it stays around 60-65% when lights are off and intake fan on/off 1/2 1 being turned on for 20mins and turned off for 40mins. Small portable fan on all the time, only when it's being charged it's not turned on. 12/26/21 update. PPM on run-off was way down to 720, and it's taking a lot longer and less water us draining off, meaning to roots are picking up the nutes. Well, that's what I take it as, cause before I'd let the run off build up and only collect and measure after 24 hrs to see what volume, ph and PPM it contains, we have 35% less run-off and PPM count is down 1300, but is that to do with less liquid, the same PPM nutes and volume have been consist the whole 4 days, so, take, what you will from these results, I guess it'll show in a few weeks, (oh, and PH is holding around 6.45-5. The organic plants are keeping up, I could actually swear that they are getting bigger quicker then the hydros now. 30/12/21 Update. Looks like there is some small nute burn on the zkittlez og auto hydro. I think I double dosed the liquid and I've none left, and I was pouring the run off build up after 2-3 different nutes, so, EC was probably way too high.