By continuing to use the website or clicking Accept you consent to our cookies and personal data policy and confirm that you are at least 18 year old. For details please see Privacy Policy and Terms
I water with a lot of water and I plant directly in my mixture of 70% coco, 30% perlite.
Water : tap water at 280ppm. I adjust the Ph to 6.
Temperature : 21°C
Humidity : 60%
-----------------------------------------
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
My FullGas' had some problems.
One was unable to remove the shell from the seed. I managed to remove the shell without damaging the seedling thanks to the help of Creepy_Steeve who gave me detailed explanations, a big thank you to him. Go see his diaries he's a boss.
This plant is now growing very well.
But I don't know why the second plant is no longer growing. it only has one pair of leaves while the other is already showing its 3rd, let's see how it evolves...
------------------------------------------------------------
Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 500ppm and i adjust the ph to around 6
Temperature: 22°C
Humidity: 50%
only one photo this week. The next one will be more provided.
I replaced my 25w cfl bulb with my 250w HPS, my plants said 10x thank you.
The plant in the center has only had one pair of leaves for 1 week. I thought she was dead but she's starting to grow back weird.
-------------------------------------------------- ----------
Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 500ppm and I adjust the ph to around 6
Daytime temperature: 28°C
Night temperature: 21°C
Humidity: 50%
Last week before I spend them in my 1m² tent.
When the lamp comes on my humidifier is still on.It is essential because my HPS heats up too much and dries the air.
I will receive a 300w led lamp next week :)
-------------------------------------------
Water: tap water (280ppm). I add 0.5g/L of Grow mineral powder to reach 550ppm and I adjust the ph to around 6
Daytime temperature: 26°C
Night temperature: 21°C
Humidity: 50%
I want all my 9 plants to have 8 strong branches at the same height. For this I did a topping on day 26, Then I cut 1 layer of leaves per day until there was only 1 left and with this I started a main-lining on my 9 plants
There will be a lot of branches to pull with strings... I hope everything goes well and I hope to have a big tasty harvest 😊
------------------------------------------------------------------------------------------------------------
-Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8
-Daytime temperature: 25°C
-Night temperature: 22°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
I changed my tent this week, the lamp and the Mars Hydro extractor convinced me that it was good gear so I took the tent in + 😀
Pulling all the branches with ropes is way too much work... I think I'll just pull the 2 main branches down and add a scrog net next week
-----------------------------------------------------------------------------
-Water: tap water (280ppm). I add 0.7g/L of Grow mineral powder and 0.2g/L of Calcium to reach 820ppm and I adjust the ph to 5.8
-Daytime temperature: 29°C
-Night temperature: 25°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 60% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
This week i flush the roots with tap water ( PPM : 310 , PH : 7.5) after i add water with 0.7 grow powder and 0.1g of Booster PK+ to reach 720PPM and adjust PH to 5.8
----------------------------------------------------
-Daytime temperature: 27°C
-Night temperature: 23°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Thanks to Creepy_Steeve for the legendary tips, in this diary he guided me to remove a shell that was stuck on a seedling, now it has become one of the biggest plants in the crop 💪🙏
Flowering begins.I did defoliation on the lower tiers on day 4 of flowering
------------------------------------------------
Water: tap water at 300 PPM, I add 0.7G of Hybrid powder per liter to reach 800PPM and I adjust the PH to 5.8. Currently I water my pots with about 1.5L of water every 4 days
-Daytime temperature: 27°C
-Night temperature: 23°C
-Humidity: 45-65%
-Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 2/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
it grows so fast. The lower leaves are shaded and away from the light. So I cut them as the plant gets taller
I really don't have a good setup to be able to clean my roots. I tried this week anyway. I watered each pot with 2L (not enough I think :/) of water at 450PPM PH: 7 then after I gave 1L of water at 900PM PH: 5.5.
There was a big puddle in the room afterwards. But it wasn't that hard to clean up after all. In 5 minutes with a rag and a bucket
------------------------------------------------
-Daytime temperature: 24-29°C
-Night temperature: 22-27°C
-Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) )
-Lamp: Mars Hydro FC3000. intensity 80% at 40cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 3/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
one of my FullGas is late from the beginning and even for flowering.
I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold
I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity.
---------------------------------------------------------------------------
- Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule.
-Daytime temperature: 22-26°C
-Night temperature: 20-24°C
-Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) )
-Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 3/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
- Water: tap water at 300 PPM, I add 0.6g of Hybrid powder and 0.4g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule.
-Daytime temperature: 21-26°C
-Night temperature: 21-23°C
-Humidity: 55-80% :/ too high
-Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves
-Room: Mars Hydro 100x100x180cm
-Extractor: Mars hydro 402 CFM Max. power 3/10
-Substrate : 70% coco, 25% perlite, 5% vermiculite.
My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA==
Looking for MarsHydro equipment for your crop? 🔥
You can use my promo codes! 🙏😻
3% off with "houstone3" for: TS LED Grow Light, Tent, Ventilation
5% off with "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits
https://www.mars-hydro.com/?acc=hou-stone
Superb variety that I discovered, very tasty with sweet smell cheese and productive. I place it in my favorites, To be redone in a future culture
Instagram :
https://www.instagram.com/hou_stone420/
Very nice and simple grinder that i reccomand :
https://shop.greenhouseseeds.nl/merchandise/hemp-grinder/