Fridge FastBuds Unreleased Champions

CRAIG971 So I'm using a Beko fridge that I've turned into a grow room. The indoor space is 40 x 50, and the vegetable bin serves as a 35L reservoir. I use a small 1W pump and some air stones. The total room consumes 100W at maximum power. It's a lamp I bought on Aliexpress, YXO LED 85W. I wanted a grow room that consumes a maximum of 100 watts, but currently, the total consumption is 56 watts to not be too harsh on the plant. I'm going to use the SCROG system, and I'm on a DWC system. I use a temperature and humidity sensor as well as a CO2 sensor connected to Tuya. There's a surveillance camera to monitor the growth inside. The entire setup is manageable via an app. The last harvest I did in this fridge yielded 120g dry with an 85W lamp. 1.41g/watt. I added a bottle of warm water with some baker's yeast, sugar, and crushed tomatoes to make CO2. The extractor has double activated carbon filtration.

CRAIG971 The plant is growing very very well, I am very satisfied.

CRAIG971 Beginning of the 3rd week, the plant is developing very well. I've increased the nutrient level, adding 0.5 g per liter, which makes a total of 1 g/liter. Soon, I will cut the main head and set up the SCROG net. Challenge: 150g over an area of 54x44 cm. From time to time, I add a bottle of sweetened water with baker's yeast to create CO2; a constant 1500 ppm would be ideal.

CRAIG971 La plante pousse très très bien je suis très satisfait elle fait à peu près une vingtaine de centimètres beaucoup de départ aucune carence on voit sur les photos qu'elle commence à fleurir mais je vais essayer de la faire pousser encore J'ai attaché le bas de la plante avec un serflex pour pouvoir concentrer les branches au centre et pouvoir faire une canopée parfaite j'espère pouvoir remplir tout le grillage

CRAIG971 The plant is growing really well I added a hole so I can check the pH and electrical conductivity, as well as refill it without any problems At the end of week 5, the screen is almost completely filled, so I’m expecting at least 150 g, if not more, from a 50 x 40 cm space

CRAIG971 For your information, the grow room is 0.2 m². So, to get a total of 1 m², my space would have needed to be five times bigger. To work out the yield for one square meter, I’ll multiply my harvest by 5 and see how close I can get to Fast Buds’ reference figures, which say around 350 g/m² to 650 g/m². So logically, that’s between 70 g and 130 g. If I only get 70 g, I’ll be gutted 😡 More than 130 g dry would be TOP 🎉 Keep in mind, I’m doing this test with an 85 W YXOLED LED light I bought on AliExpress for €35. Switched to flowering after 5 weeks 🎉 The plant is developing really well, and the first buds are starting to appear. I added an air stone to add oxygen to the nutrient solution. I removed quite a few leaves to let the light through properly. The net is almost full, and the plant is even starting to spill over the sides. I hope I can hit my target of 150 g from one plant in a 50 x 40 cm space. The nodes are spaced out, so I’m hoping it’ll still produce lots of buds. Two small branches broke by accident. I added 2 ml per liter of Advanced Nutrients Big Bud to the reservoir, which had 30 liters of water in it, and I hope it won’t burn the plant. The combination of Dry Part Bloom and Big Bud. The first photo in the diary is from when I arrive and open the fridge, and the last one is after I’ve finished training the plant. The plant doesn’t look great growing under the net, but I’m trying to maximize the yield. I hope the center of the net fills up with buds. The net is completely full now, and the plant is even starting to outgrow it. Since it’s a random seed, I ended up with a tall plant. We’re at the end of week 6. The plant is huge and still growing, and I’m starting to have trouble keeping it under the net.