This grow is all about AlphaKronik F2 (Dogbud “Chem D” x Dawgfather (Chem D x Sin City Kush (Las Vegas Purple Kush x Snowdog BX)))
I'm excited to grow this Chemdog dominated lineage, and I really want to see it- and smell it- live up to AKG's website description. I really want some pungent stinky cannabis in my life again, and this Oregon breeder makes this sound like a winner. The description makes it clear these ladies will bloom with flowers exuding a thiol-laden resin. Garlic, fuel, and funk loudly filling a room at the crack of a jar is what I imagine. Fingers crossed for a success over the holidays.
Aside from the wonderful genetics, I'm also excited about not needing to buy ANYTHING outside of consumables for this grow (although I might still choose to buy additional equipment). This might lead me to building a small format solution for housing mothers so I can speed up the grow cycle.
11/10/2019 - I'm calling tomorrow day one for convenience. Sunday just works better, so here I sit on Saturday morning writing this. My AlphaKronik F2 clones (I only got one mother from 4 seeds, so they all have one mother) are taking root in the rockwool. I've dropped them into place in the aeroponic chambers, I've only gone one clone with exposed roots so far, the rest are definitely rooted and should catch up within 2 days. Starting these girls on a mild nutrient solution to get them acquainted with their environment. I plan to increase their nutrient concentration to 1300 PPM and maintain that level through the grow-- as suggested by another aeroponics grower on a separate forum. Obviously I'll decrease nutrient concentration if I see signs of burn, but I want to see if there is any truth in this guidance. Should be a fun grow over the winter. The indoor conditions are much more controllable this time of year, so I hope to avoid any flower defects. Looking at the schedule, if I go six weeks veg, I'll be flipping to flower right around Christmas week.
11/14/2019 - Remember that thing I said about clones being "definitely rooted" and only waiting on a couple to catch up.... that was a lie. I checked everyone today, only three clones are actually rooted, the rest are trying hard. Likely extend this first week into two weeks while I wait on some of these girls to become real living clones. Stay tuned!
12/7/2019 - Remember how I started this diary a month ago?! Well I finally have rooted clones. My living space is a little too cold for clones to root, so I got a cheap lamp + halogen bulb to heat up my clone chamber. I have five plants into the aero chamber, and I'm waiting for the final ONE of several cuttings to put out roots. C'mon! This is supposed to be easier now!
12/9/2019 - At this point I'm not even mad, I'm just really curious how, a full month later without roots, these clones are still green . I added a more flexible green cutting to the mix on 12/7 and I figure out of five contenders, one has to throw out roots soon. Until then...
So the plan is to grow four AlphaKronik F2 clones + two Black Jack clones, and this journal will document the AlphaKronik F2 ladies. All four are from the same mother, only one of the four seeds popped showed female. Fortunately, one is all I need. I'll occasionally mention the Black Jack, if only to note the differences or oddities. Like right now the BJ on site 4 looks to be doing a re-veg. This is odd because all of the mothers lived together in the same environment. I had noticed the BJ pushing to flower despite the light cycle, but not a full flower-- just more calyx growth than I saw with other plants still in veg.
About the AlphaKronik F2 clones - Sites 1-3 look great, taking well to the aeroponic environment. Still awaiting new growth. Existing growth has perked up significantly and deepened in color. Site 6 will be my final AlphaKronik F2 plant, awaiting these clones taking their sweet time rooting. The first to poke roots through the rockwool wins a cushy life with food misted directly onto their roots, climate controlled living space in a high rent city, excellent lighting, and free healthcare. But first, you have to root!
12/10/2019 - We have a WINNER! Finally, a tiny root poked through to bottom of an AlphaKronik clone! Transferred her to site 6 and now we have a full house. All other sites are showing new growth, I'll be happy to have six well-sized plants this time around. Really curious to see a fuller yield. I'll likely order a couple more QB panels after the end of the year, in mid/late veg. I want to really maximize this grow space and launch a small seedling/early veg tent by the end of this grow. Losing my closet for three months sucked.
@ThatsMyPurse yes I find it works a lot quicker if you provide the optimum temp and humidity so I use a heat mat with a heat controller set at 23c inside a germination/humidity box with clear plastic lid and then I reguarly mist the inside with water from a spray bottle .
How to maximize terpene production? I'm growing a strain that is supposed to be super stinky, and I so desperately want to get the full potential from this Chemdog cross. What does the plant need for producing terpenes and thiols? (My setup requires fully dissolved nutrients.)
-You can use additives like molasses and many others.
-You can play with the spectrum as they are spectrums that helps to have better veg and others to have better flo
-You can apply a dark period at the end of flowering.
-You try to reach the best values possible for your environment parameter.
-You need to have a stable genetic because cross can lean on the mother side or on the father side so if one smell good and the other not then you'll have to make a selection.
-You need to know when to harvest ( my cheese was at a perfect terpenes level when the trichomes were cloudy but an average smell when harvested with amber trichomes) , the harvest widow is important.
Started cutting today. Hung 1 plant in big chunks, left lower buds on.
Should I dry everything together? -or- Should I trim lower buds and make bubble ASAP?
Those buds look amazing! Great grow :)
I usually take my trim and freeze it fresh. When I'm ready to make hash, having the material already frozen will help the trichomes fall off. Perhaps freeze the trim from the first batch and join it with the second when it's ready?
Clones like it warm and very humid.. i cut the long leaves, so its easier for them to concentrate in the Roots. Give your Girls a tansparent dome ( half of a Plasticbottle) and put them on a warm place with light
@Mrs_Larimar, Thanks for the information. I've pulled them from the system back into a cloning tray and added a little heating pad under the tray. It's definitely high humidity in there, flooded some of the grooves in the tray to make sure of that. Going to wait until I see roots before moving them this time-- if they make it, but I've seen clones take longer to root.
Thank you again, love this community!
@ThatsMyPurse, we’ve been growing in it all winter lol! But we currently have 5 in full bloom and the rest are young ! We got a perfect rotation to keep it full between all stages of life! But the smell is starting to take over lol that’s why I’m interested in getting a filter system! But I’m gonna check into it and probably just do something like you said just hole cut what size I need in the door and just vent it out into the bigger room to keep the smell down thanks! 🙏
@MiPotFarm, Ah, not sure if you are planning on doing your complete grow in the closet, but you won't have much need for a filter during Vegetation. I grow out my mothers for cloning in my closet and just leave the door cracked with a fan running. If you need to drill/cut a hole, doors can be pretty cheap. There's always Home Depot & Lowe's, but you could also check for a larger resale shop. One resale shop in my area has TONS of doors for super cheap. Just a suggestion
@ThatsMyPurse, yea I guess I should of been more descriptive! I was wondering if it was running out to fresh air to vent like through the wall or if you were just venting it out of the grow room into another? I ask because I’m putting one in my closet grow I’m using but I don’t want to vent it to the outside through my wall because I’m adding a grow room in my garage to be more permanent and don’t want to be putting holes in my house lol! So you said your venting yours into a bigger area I think you still did answer my question! Thanks
Oh baby are those some gorgouse looking buds. So beautiful. Spectacular work growmie. Keep doing what it is you've been doing and may the ganja garden gods give you good fortunes until the end
@Denzul, Thanks for the encouragement! I've really enjoyed growing these girls and I'm very happy with them. It's really nice getting these comments, I don't know any growers where I live to pal around with.
Gonna start chopping after a quick meal!
@ThatsMyPurse, Hi I pretty much poured out all the fertilizer :-) in the end he became Canna. every now and then I grow with a different fertilizer but rarely. at canna, the values remain very stable, especially in aerophonic :-)
@MadeInGermany, Awesome! Thanks for checking mine out. How are you liking the Canna line of nutrients? I've only used GHE, but I like to try different formulations.
Great looking plants!
@Ferenc, Thanks again! They look much better int he photos. IRL, the foliage is making me nervous that these won't ripen in time! I'm sure it will be fine though. Have a great day!
@smoking_hills9, Thanks for checking it out. It was a dream project when I was younger, but too risky/illegal to attempt. I'm glad I got around to it, and I'm still surprised it actually works.
@Wachsemilian, I got too eager and set myself back. D'oh!
Pulled the clones from their little chamber too early and now it's been two weeks. I put them back in the lidded flat for high humidity two days ago. They are just starting to get rooted... or at least they are still alive. Not sure if they'll take. Input would be appreciated from a pro!?
@ThatsMyPurse, thank you appreciate the help, i have the same pump as well but i wasnt really happy with the droplet size(the same sprayers you started with) so im looking for better sprayers! thank you again i really appreciate the help.
@joeymack, I ordered everything for the aeroponics project on amazon; the lights were ordered on alibaba.
All research for the main pump points to the Aquatech 8800-- it is used for pressurized R/O water systems and NSF rated. The pumps I'm using for draining the bins are some inexpensive 9V arduino pumps I found on amazon. The nozzles are poultry misters, but they were hard to find inexpensive fittings that contained no brass. If you aren't as obsessive about droplet size, the barbed style ones from Mist King are more convenient to work with -- just jam them into the end of your compatible tubing.
Good luck, have fun, be safe! (Maybe the other way around)