Ph meter
Weedman420highstarted grow question 6y ago
Can anyone reccomend a good fairly cheap ph meter
Solved
Setup. Sensors
likes
Canadamade420answered grow question 6y ago
Hey I use the one from amazon for $15.99cad and it’s called lumo-x. And if you need a PPM meter they have vivosun brand combo set for $26.99cad. Hope that helps and happy growing
Similar Grow Questions
Solved
CANNA_401
Luftfeuchtigkeit zu hoch für die Blüte? - Methoden zur LuftfeuchtigkeitsregulierungI realize that I won't be able to keep the humidity consistently below 50%. Do you think I should invest in a dehumidifier? (Sensor at plant height)
I don't want to risk mold forming on the buds.
Thanks in advance for the replies 💪👽3y ago
7
1
Solved
Hisknibbs935
Pre run test showing high temp and low humidity,Hello,I have pre run to test the temps and humidity on my first one ,i run a 600w hps in a 1x1x2 tent with 5 inch rvksileo extract my temps at at 35c and my humidity below 30 despite setting for 55% would a test without a plant be false ? Should i drop to 400 ?
Setup. Sensors
Setup. Lighting
6y ago
1
3
Solved
snowmanbl90d
PH TestingI have a vivosum ph meter, a ph tester for the up/down ph liquids and ph test strips. All of them don't seem to agree with each other with in a range of 1 ph across the ph scale. My question is what is the most reliable or is there a different method I should use?
6y ago
3
4
Solved
AirDuster
Reducing PPM without changing water in hydroThanks all for guidance on my previous question. As a follow up, can PPM be lowered by reducing feeding until they hit the right range? Currently 1500ppm but seems this is too high. Currently following the AdvancedNutrients plan.Other. General questions
Setup. Sensors
Feeding. Schedule
6y ago
3
4
Solved
Mooncat
EC/PPM Values for SoilI just bought some EC/PPM Meter and cant find some Chart about the right values for growing in Soil...i know how and so on but yeah.Setup. Sensors
Feeding. Other
6y ago
3
Solved
Lala_grows
pH Pen Calibration Frequency?How often should I re-calibrate my PH pen? I have a cheap Milwaukee pH600 and after 3 months of use it had drifted enough to cause real damage (was reading 5.8 when chemical drops read ~4.0). Alternatively, is there a reasonably priced option that would avoid this?Week 12
Setup. Sensors
3y ago
3
3
Solved
Abacus
InkbirdI bought a inkbird itc 308s to control temperature. In heat plug I put a little heater, but in cold? I was thinking to connect extractor, but until now in my grow the extractor was always on, from 1st day of veg to last day. So, should I connect something to cold plug or not?Setup. Sensors
4y ago
2
Solved
Minnesota_Grows_420
CO2 meter suggestionsSuggestions on a decent reasonably priced CO2 meter? ThanksWeek 2
Setup. Sensors
3y ago
2
2
Solved
ClydeGrows
pH meter calibrationSorry for all the Q's lately haha! pH meter problem. Trying to calibrate and it reads all three solutions as 3.9-4.3?? I used distilled water and fresh sachets. Literally arrived today and it ain't fucking working 😂😂 universe is against my grow :(Setup. Sensors
4y ago
8
5
Solved
I_T_C_R_W___GROW
perfekt small grow - what is needed? What a perfekt light needs or should have?What features should a universal Growbox have ?
And what a perfekt light (for a 50x50cm Area in this box ) must have- for seed / settling/grow/& bloom & maintaince like holding a Mother near endless? Can you all help me to build the perfect diy box?1y ago
1
2
Solved
versace_grow
RH 90% during Flowering!I have a problem with RH. I am at the 3rd week of Flowering and I'm struggling to keep my RH down. Today it was 90% when I opened the grow box. I have access only to a window. Is it better to suck air inside or blow the exhausted air out? I can't do bothSetup. Sensors
Setup. Ventilation
7y ago
2
3
Solved
MTRGG
Hey growers, I'm new to the indoor world, and I'm having trouble learning about ventilation and air extraction. I have a box that's 90 x 90 x 180 with an extractor Ø 12.5CM - FLOW RATE 280 M3/H. I also have a humidifier. How should I set the timers to save energy as well? Thanks!Setup. Sensors
5y ago
4
3
Solved
Peweez
Connecting 2 SANlight evo 3-100 with AC Infinity Controller 69 PROHi guys,
I want to connect 2x SANlight 3-100 1.5 with AC Infinity Controller 69 PRO. I searched on the internet and found that i'll need this sanlight Trolmaster RJ12 cable and this AC Infinity UIS Type-A RJ11/12 0-10V Dimmer. Do I need this stuff for each lamp or can i combine?Setup. Sensors
Setup. Lighting
2y ago
2
3
Solved
Newbiegrower420
I was struggling with low humidity, now I can’t keep it below 70%.Hi! Since upgrading my 4 girls into new 3 gallon pots & giving them a good water the humidity levels in the tent have soared to over 70% Will this reduce as they drink all the water in the pots? Shld I invest in a dehumidifier yet? Running out of space 😬
Week 3
Setup. Sensors
6y ago
3
5
Solved
fartsimpson
What should be plugged into the digital timer?Currently, I have the timer plugged into the wall outlet, then to the powerstrip, but this doesn't seem feasible. I have lights, exhaust, fan, and humidifier connected to the powerstrip, so everything shuts off when the timer is off. Is this the norm?Week 1
Setup. Sensors
6y ago
2
2